I was using my macbook pro and the screen went black and when I tried to turn the computer back on with the power button it keeps beeping at me. Is it gone?
Info:
macbook pro, Mac OS X (10.6.2)
1.turn into black screen after running for about 15 mins, but the system is still running because the keyboard is still functional. After reboot, i record the log as below, it shows that it is a GPU Panic.
2. display would not turn on after pressing the power button but can still hear the apple start up chime and the system keep running with the screen off.
3. after erased the hard drive and re-installed Mavericks. Under a new installed system, it can run normally for about 1 day, after that especially after a shut down or restart, the problems above came back.
I am currently working in Thailand but I have no plan to go back to the US in a short period of time. I brought the laptop to the local apple service, they said it is certainly the logic board or GPU failure and the parts need to be replaced. The cost of the replacement is around half of the price that I paid for this laptop.
Anonymous UUID: 398E619F-8811-6838-BEFC-13DF20E24CAE Tue May 27 10:02:04 2014panic(cpu 4 caller 0xffffff7fa970bf7c): "GPU Panic: [<None>] 3 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x102c00000 0xffffff8138e01000 0x0e7150a2, D0, P3/4
[Code]....
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
I have a macbook pro, bought it May last year(2008). I don't know much about computers, but I loved the transition between pc and mac, had no trouble with it, loved to work with it, until now. I had noticed it became slower like 3 weeks ago, and a week ago, it started to freeze up on me followed by a message that said please restart your computer by pressing the power button and the screen becomes dark. When I try to restart it again, it takes a while because it shuts down again and again, until the 10th time it works. The store told me to clean intall, which I did yesterday, it seemed to have worked, it was faster for sure, but today it happened again, 3 times! Has this happened to anyone? Does somebody know what to do?
View 4 Replies View RelatedI had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View RelatedI have a mid 2012 13" MacBook Pro my screen turned blacked and will not turn on with constant beeping every 5seconds! It was just working fine yesterday!! I read online that it may have been the memory ram so I replaced it and it still continues to do the same thing!!! I bought the MacBook used about 3months ago!
View 13 Replies View RelatedMy MAC is not opening. After pressing the on button its showing white screen with big ? mark no other response.
Info:
Mac Pro
i have my power saver set up so that the display goes to sleep after 30 minutes do i get it to wake back up without pressing the power button in the back?
View 5 Replies View RelatedI'm a new Mac user (my MacBook Air bought on April, 17th). I was wondering, is there a way of quitting an app by pressing on the red button only, without pressing on the app name on the menu bar and and then on "Quit X"?
Info:
MacBook Air, Mac OS X (10.7.3)
When I press the start button there is a delay of 3-4 seconds before the computer turns on and the sign in screen appears. Then when I shutdown it takes up to 4 minutes to actually turn off the screen.
I also ran a diagnostic check and received the error code HDD/11/4000000:SATA (0,0)... What I do next?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.1)
MacBookPro15.4 less than a year old keep freezing/locking with black dialog box to press power button until off and restart THEN repeat successive times after restarting it?
Info:
MacBook Pro, Mac OS X (10.6.8)
When I press the power button a grey screen comes on and it won't go away
Info:
MacBook Pro with Retina display, iOS 7.1.1
When I press the power button on my macbook it goes to the loading screen and stays there. It don't freeze it just keeps loading. I dropped it on the floor today but it worked after that.
View 10 Replies View RelatedI had a repair done to my mac because it was beeping when i tried to turn it on and the display stayed black. They only replaced one part... does anyone know what this part actually is and what it would have cost me to buy myself???
it says logic board: Item number 605-1795
I cant find out what this part even is...
I'd like to force quit just like in Windows when I press the Red Button. It's stupid that OS X minimizes it. ( programs consume alot of CPU power if you do this, I watched activity monitor and some programs use 10-20% in this state )
How do I setup OS X to force quit an application when I press the Red Button?
I have a black screen which beeps when I try to power on.
Info:MacBook Air (11-inch Late 2010)
When I was working on my MBP last night I noticed the computer slowing down, then a sheer black wash went over the screen and a prompt saying I need to manually power off and then power on the computer with several different languages below. When I did that the computer made the on sound, opened up to the apple logo in the center and the spinning gear below. But its stuck there! I can definitely hear the laptop running but it hasnt budged for the last 12 hours.
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.0.x)
I made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
My specs:
iMac 27" i7
OSX 10.6.4
Magic Mouse
I swear I am not crazy but at random times when surfing I will be taken back to the previous page even though my hand wasn't even on the mouse.
I cannot get my macbook pro to switch on.when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing. I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed My macbook is 1 year and 4months?
Info:
MacBook Pro
My MacBook Air's (2008) screen went blank. Now the power light flashes and it beeps continuously. I have tried rebooting, but no change.
Info:
apple, Mac OS X (10.6.5), iPhone macbook air iPad AppleTV (both)
My iMac all of a sudden started to scroll down gray and then said I needed to restart. When I push the power button the screen lights up but the iMac just beeps. How do I start up?
Info:
iMac, Mac OS X (10.5.4)
When I start my computer up in the morning everything else starts normally. First the light comes on on the front of the computer and on the bottom of the monitor, then the start up tone rings and the computer is fully running. But my monitor is black and I do not get the apple picture or nothing on the screen. I thought my monitor was going out, but we have another work station the same and I switched the monitors (same 27" cinema screen as mine). I can actually use the other computer and network into my computer and fully use everything on my computer. But my monitor is black (no display)! I have contacted MAC and have reset the PMU button many times and sometimes this works, but most of the time it does not. I just keep restarting the computer and finally it will start up normally with the display and everything.
Information:
Dual 2ghz PowerPc g5
Mac OS X (10.4.11)
27" Cinema Screen
After the 10.5.1 software I'm having a problem with distorted (stripes etc.) icons and menu dropdowns. Apparently not on my desktop or programs like Safari, Mail etc., only on icons and menu dropdowns, which I find odd. Sometimes it's gone, but after some time it reappears again. Anyway, sometimes my Mac (iMac G5, PowerMac12,1, 1.9 GHz) is going bonkers completely, which results in a first pink, then black screen. A hard shut down is then the only option. However, I guess it's videocard related (ATI Radeon X600 Pro). I did all the tests, fixes you can think of, but without any results. I contacted Apple support, but because this is an iMac, you can't just replace the card, they told me that the whole motherboard should be replaced, which will cost me approx. 700 EURO. Of course I am not willing to do that, which means that I'll have to buy a new Mac. Of course a new Mac is always a delight, but I find replacement after just 2 years unacceptable.
Information:
iMac G5 PowerMac12,1
Mac OS X (10.5.1)
First of all, Noob imac owner here. I was just handed down an old imac g3 400mhz desktop that doesn't power at all.When hitting the power button on the unit or keyboard, the units screen makes a noise. No hard drive or green light comes on at all. At dead silence in the room, i can hear the screen flicker, like a tv would come on. I went to go about and read a few problems before, replaced the battery and even tried a new power cord. Any Ideas?
View 2 Replies View RelatedI have been given a 1.6 Dual G5 running 10.3. I tried to upgrade to 10.4, the first disc installed but crashed several times on disc 2. I had run DU previously to check there were no problem. Each restart took me back to disc 2 which failed to install. I then tried to install 10.5 (Leopard) booting directly from the disc, it started then crashed leaving a black screen with the following promt:
local host:/root* (a hash not an asterisk!)
Anybody offer any suggestions as to what I should do?
Information:
G5 1.6 Dual
Can't get back to my desk top. All I have is a black screen with white text starting Darwin bsd. Have tried a safe reboot but after grey then normal blue screen when loading, this disappears and I get back to the black screen again.
Info:PowerMac, Mac OS X (10.4.11), G4
I installed several system updates on my 2007 iMac last night, running OS 10.7, and today I can only get a black screen with a flashing white power light when I try to start up. My computer will neither start up nor completely shut down, and my wired keyboard won't communicate either.
View 5 Replies View RelatedIt's only an 8 month old mid 2009 uMBP (2.26ghz, 4GB, 500GB). I was using the Disk Utility when it asked me to insert my MAC OS X Install disc and press "c" during start up and repair it. Every time I insert the disc and press "c" my screen goes completely dark. I thought it could have been a problem with the sensor so I flashed a light into it but it didn't work. I even tried putting it directly towards the sun light and still it doesn't work.
View 1 Replies View RelatedDo not want a nuisance to escalate into a serious problem thru benign neglect. Random black screen -- Turn monitor off then on, and all comes back fine. No loss of power in machine, no fan quirks, no overheating. Is it the Monitor? or the graphics card?
Info:
PowerMac, Mac OS X (10.5.8), 6GB DDR2 SDRAM
