Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub. I'm using 10.7.3 on MacBook Pro. Don't care what model bizhub is being used as I have access to many. I've seen the posts for FTP workarounds but want to use SMB if that is an option.
Info:
MacBook Pro, Mac OS X (10.7.3)
When I email a number of jpegs as attachments (from newly acquired iMac) to pc users they are unable to view them as attachments.
I have removed the auto signature and also changed to Palin Text as suggested in other threads but still no joy!
I also tried a solution suggested in another thread that involved typing something into Terminal which shows works at iMac end to show jpgs as individual attachments but there is no clip when it arrives in outlook on pc just a joined up line of thumbnails.
we regularly have to send emails with several images attached - I know you will suggest using the zip folder but many businesses block these from their systems and the folders are stripped from the email.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I have just upgraded to Lion 10.8.2. I have not been able to complete a restart. I go to the apple menu, click on restart.The computer powers down and restarts but never opens the desk top. The screen remain grey and a graphic just spins. I have left this happen for as much as 15 minutes without it openning the desk top. When I power down the computer with the power button and start again with the power button. It starts no problem.
View 1 Replies View RelatedBought and successively downloaded os x lion on my Mac, but does not show as installed
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
Having upgraded to OSX Lion some time ago, our Buffalo Linkstation had issues. Eventually found some well hidden Buffalo updates and patches and all was working well. Good news as it holds all of our music, photos and shared business documents. In the past coupe of weeks my wife and I have both been getting an increasing number of dialogue boxes appearing saying "Do you want the application NasNavigator2.app to accept incoming network connections?" Despite having allowed all Buffalo/NAS Navigator programmers in the firewall settings this is getting worse.I am currently getting this dialogue box pop up in batches of 5 every 15 seconds..This is making using the computer almost impossible.Having had lots of correspondence with Buffalo and none of their suggestions working, I have pinned it down to the firewall. If I turn it off (risky I know) the problem does not occur and we still have full access to the Linkstation.The issue is obviously with Lion's firewall and from the posts on the internet looks like it has been an issue with previous OSX back to 2010.
Info:
iMac, Mac OS X (10.7.4)
Trying to scan on HP Office-jet Pro 8500 wireless all-in-one with my new iMac OSX10.7.3 Printing is fine. Connected via USB.
Info:
iMac, Mac OS X (10.7.3)
Why can't I scan text from my Epson Perfection V500 Photo scanner into editable text using ABBYY FineReader5 SprintXZ?
View 1 Replies View RelatedMy Officejet 5610 has stopped Scanning since the latest HP upgrade from Apple last week. I cannot conect with the scanner. I am using Lion on a MacBook Pro.
Info:
iPhone 4, iOS 5
cannot scan page from laptop, always prompt connecting to the printer.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
I have a new HP Photosmart 7510. It is possible to scan, if I use HP Scan 3 or the possibility in the printer and scanner driver menu. I habe installed the newest driver (3.3.3). In some applications (Acrobat X, GraphicConverter) I need to scan with TWAIN, but it is not possible to choose the scanner because it does not appear in the dropdown menu.
Does any know, if it is generally possible to scan using TWAIN?
Info:
iMac, Mac OS X (10.7.3)
I have noticed for few days, that since I have upgraded to OS X 10.7.3 I cannot open my scanner any more. Mac shows a message that says "it cannot open de applications installer because the application PowerPC is not compatible anymore" I have tried to search new drivers on Epson website but they still have the old ones.Is there any way I can scan documents again or I have to change printer. The printer works fine to print documents from any Mac application. It is just the scanner that does not open.
Info:
iMac, Mac OS X (10.5.8)
I am totally confused about my all-in-one. Before Lion I used it successfully for printing and scanning, both using USB and Ethernet connection. I can't recollect using it wirelessly. I'd like to use it wirelessly now, but I have problems. The printer works very unreliably, getting connection error from time to time, and the scanner does not work at all. When I open Canon IJ Network Scanner Selector, I see my scanner but I can't select it. The radio buttons are disabled and 'Do Not Use' is selected. I did completely reinstall the printer, removed all the drivers and Canon software, with no luck. All I need is for it to wirelessly print reliably and scan using Image Capture.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
I want to simply scan photos from the canon mp495 via usb to my mac running lion os 10.7.4
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a Canon MX350 wifi printer that my MacAir recognizes but not my iMac. Both are on OS X 10.7.4 snow leopard. It's a pain to get anything printed right now - I have to grab everything through the MacAir since I can't print or scan directly from the iMac.What do I do?
Info:
iMac, Mac OS X (10.7.3)
I'm having an issue with the printer and scanner preferences after an upgrade from SL to lion. It keeps quitting, after several attempts I could reset the printing preferences as described in the apple support doc here [URL] but no luck it still quits. I also reset the pram and smc.
This is the crash log:
Process:System Preferences [217]
Path:/Applications/System Preferences.app/Contents/MacOS/System Preferences
Identifier:com.apple.systempreferences
Version:11.0 (11.0)
Build Info: SystemPrefsApp-214003000000000~2 .....
I went to scan photos with new iMac OS X Lion and it says "You can't open the application Epson Scan because Power PC applications are no longer supported." What can I do to support them?
Info:
iMac, Mac OS X (10.7.3), Epson Printer
How do I scan a document from my Canon MG5250 to my new IMAc?
Info:
iMac, Mac OS X (10.7.3)
Trying to scan a sheet to my MacBook Air running Lion, but whenever I open the scanner from the System Preferences, it just stays like this and nothing happens. Reading around, it appears that you can't use the MX350 scanner over WiFi using Lion. It works perfectly on my iMac running Snow Leopard 10.6.8 but unfortunately I can't use that right now.
I've tried inserting a USB stick formatted with Mac OS (Journaled) and it doesn't want to do anything, I've tried installing multiple scanner drivers from the Canon website, I've also tried to do a software update.I'm running Mac OSX Lion 10.7.4 and have a Netgear router supplied by Virgin Media. It prints perfectly fine from the MacBook Air.
Info:
MacBook Air, Mac OS X (10.7.2), 2011, 11", 1.6GHz, 4GB RAM, 128GB
I am setting up a Dell 1355cn printer that has a scan to network feature. I have enabled SMB networking in my system preferences. Now I need to know how to get the scanner to scan to a shared folder on my Mac. These are the settings I have tried but so far I am getting an error on the printer.
D01 Namee.g. PeterShare, Sharedfolder Server TypeSMBFTP (ftp://Server Address/Server Path)SMB (\Server AddressShare NameServer Path)Server Addresse.g. myPC, XXX.XXX.XXX.XXX
Share Name
e.g. SMB (Share, Sharedfolder)Server Pathe.g. FTP (pub, pub/share), SMB (finance, financePeter, financePeterSales)Server Port Number(139, 5000 - 65535) Login Namee.g. FTP (anonymous, Peter), SMB (Peter, DomainPeter)Login PasswordRe-enter Password
Info:
MacBook Pro, Mac OS X (10.6.7)
I've just got this new printer and it's great, but i can't make the ADF (document feeder) scan across the network The display on the printer says that there's a document in the feeder, but when i press scan it always starts to scan the flatbed instead.
View 1 Replies View RelatedFirstly, I know pretty much nothing about how to use Automator, nor do I know if it's even the right thing to be useing for this.What I would like to do is create a service that appears when I right click on a folder that sends that folder to DaisyDisk for scanning. I know that the application accepts folders via drag & drop onto the app (or alias). This is Plan B as I would much rather be able to simply work from within Finder via context sensitive menus.I've poked around in Automator in creating a new service, but I can't find a way to invoke or pass anything along to DaisyDisk.
Info:Aperture 3, Mac OS X (10.7.3)
I have an HP printer and I can't use the scan option because it doesn't show up on my computer. ANd when I try it from the printer it gives me an error window.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I frequently use Preview to scan documents using a networked HP scanner.
Every time I launch preview to perform some scanning, I find that I must select File->Import from Scanner->Include Networked Devices.
I find this mildly annoying. Is there a way that I can get Preview to include networked scanning devices by default?
Info:
MacBook Pro, Mac OS X (10.7.2)
Microsoft Office. Epson Scan, Canon software won't work with Lion OS
Info:
iMovie '11, Mac OS X (10.6.8)
when I click on the prefpane i get "Could not load Print & Scan preference pane." I have already tried to delete the files in my libary.
Info:
MacBook
Pro, Mac OS X (10.7.4)
Just got back from the Apple store after an appointment at the genius bar. I went in cause my mid-2009 13in MBP's battery last less than 2 hours when running on battery. This is with the bluetooth and wifi off, brightness set halfway and only having Pages open to edit an essay. They noticed I use SmcFanControl and mentioned that that program messes with the firmware that apple sends out cause it overrides the fan control.....iono, but its what they told me. They said that its best to get rid of that program...
I currently have it running, at 2000RPM, the lowest setting I believe...with my MBP @ 127*F. Its not uncommon when on youTube, Hulu, or watching a movie in iTunes for the temp. to rise to 175*F plus...which is when the SMCFanControl speeds up the fans to 5000RPMs. Anywho, aside from being curious as to what other Mac users think about this. I'd also like to make sure I delete SMCFanControl as if it was never there. I know I can go the route of throwing SmcFanControl into AppCleaner or something but i'm hoping I don't leave any fan speed settings from FanControl even after deleting it.
Have tried using Boot Camp several times but unable to remove the partition. Can someone give me some information how to restore my hard drive?
View 1 Replies View RelatedAnyone running this successfully on the MBA? I tried it yesterday and it got stuck, I think it is too big for the MBA.
View 2 Replies View RelatedI bought the boxed upgrade from A2->A3 and have been trying for days to install the upgrade. It's been one continuous crash fest-- not crashing while using new features of Aperture 3, but crashing while it sits there processing thumbnails or some such. Faces is off, Places is off. I finally tried switching into 32bit mode. Nothing but fail.
View 7 Replies View RelatedI have had to change my id repeatedly. Maybe it is because the computer is registered under my husband's name?
It keeps rejecting the id and password. It becomes a stalemate for me in shifting to icloud, ordering from itunes, etc. I have to keep an ongoing record of changes and still get stopped in my tracks over and over.
Info:
MacBook Air, Mac OS X (10.7.4)
