The following error message just popped up: "The backup disk image “/Volumes/Data/Robert's Office iMac (2).sparsebundle” could not be accessed (error -1)." I'm running a late 2009 iMac; upgraded to Lion about a week ago. It seems to have done the Time Machine backups fine for the last week.The only other recent change was to reset my iCloud account so I could sync with my iPhone.
Info:
iMac, Mac OS X (10.5.5)
I get the following message when attempting backup - the backup disk image"/volumes/data/rod Henderer's computer (5).sparsebundle" could not be accessed (error - 1)
Info:
time capsule, Mac OS X (10.7.3)
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
for the past month or so my automated backups with time machine/time capsule have not been working. Every so often the following error message pops up:
"the backup disk image could not be mounted"
in troubleshooting, i have tried to mount the sparsebundle image directly but without success. from reading around a bit i can see that others have had this problem, and that one solution is to delete the sparsebundles and start again.
but that of course means losing all my archived backups, which i would rather avoid.
I want to use Time Machine, but I don't want to have all my data sitting in the open on an external drive that someone can just carry away. Can I make an encrypted disk image, and have Time Machine use that as the backup volume?
View 2 Replies View RelatedSo my current backup strategy uses two western digital external hard drives. The first I have permanently connected to my iMac using Time Machine. On the second I use CCC to backup to every week and keep it in the trunk of my car as an offsite backup.
Just had a couple of questions to make sure I'm prepared for the worse...
- What temperatures can hard drives survive at? Is there a risk of it overheating in my car?
- I've read about some issues with CCC's backups. I'm currently backing up to an encrypted disk image - is there any way to verify the backup? If I just cloned the drive instead so it was bootable is there any way to encrypt it? And is Super Duper more reliable?
Can I make a disk image of my macbook pro for backup? I'm using Lion, have 8 g memory and 500 HDD.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
Recently I haven't been able to backup. Why this is? Not too sure. I don't remember changing any settings or anything recently but within the last 2 weeks or so I haven't been able to backup at all. When I start backing up it says "preparing backup" then an error message pops up that says "The backup disk image could not be mounted".
View 24 Replies View RelatedI'm just curious as to what everyone's backup strategy for Windows is? I've been exploring the options of the Windows XP Backup utility, but I also like being able to have a entire disk image with Winclone. However there's no way to back up incrementally with Winclone. I'm sort of mum on both options, or would like to know if there's a better option? So what have the other Boot Camp participants been doing for a Windows backup?
View 7 Replies View RelatedI use Carbon Copy Cleaner to backup. I've set it to backup to a sparse, rewritable disk image. If I, say, delete a file, then do another backup, will the file I deleted still be in the folder it was in, or will it disappear as if the backup was cleared and redone?
View 2 Replies View RelatedTwo days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end. TM sees it and it is mounted but cannot go any further
Info:
Mac OS X (10.5.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
I had, way back on 10.0.0.4 a copy of a little program that did nothing but flash an indicator on the upper left corner of the menu bar when the disk was being accessed, great for iBook use.
View 7 Replies View RelatedI made a disk image to have a password protected folder, but now i can't delete it, even after i put in the password.
Info:
Mac Pro, Mac OS X (10.7.3)
I downloaded the Final cut pro x trail today and tryed to open it in downloaded but the program refused and said the problem was that it was not recognized.The program was disk image mounter.
Info:
MacBook Pro, Mac OS X (10.7.2)
Apparently, there are two ways to convert disk images in CDR format to ISO format:
1. Rename diskimage.cdr to diskimage.iso
Or
2. hdiutil makehybrid -iso -joliet -o diskimage.iso diskimage.cdr
The first method is really quick while the second method takes quite a long time. Do the two methods yield the same ISO file? In particular, I would like to convert a bootable CDR disk image to an ISO disk image.
Yesterday I downloaded and installed Lion. After a while I tried to open one of the disk images that I have stored on the harddrive, which worked to mount prior to installing Lion. While attempting to open it, the process fails and gives the error "no mountable filesystems". I have searched for the error on the internet, and there does not seem to excist a solution to it. However, all the people with the same error, whcih did not have a solution, did not seem to have a similiar problems. Their problem lied with not being able to access disk images downloaded from the internet, while my disk image already excised on the hard drive before installing lion.
Many of the files and documents on the disk image are irreplaceable to me. I can not stress how important it is for me to recover them. If I am not able to do so, it will result in a massive economic loss.
Info:
MacBook Pro, Mac OS X (10.7.3)
My MacBook Pro has OSX Lion on it. I have created a DMG image of my starting volume using Disk Utility. The image was saved on an NTFS formatted external USB disk. I used Paragon NTFS for Mac to activate writing on NTFS partitions. The image was created, tested and it mounted fine. It's size is 105GB.
I have restarted the system and am accessing Disk Utility from the recovery partition that OSX Lion creates. Disk Utility can see the NTFS disk and I can choose the DMG image as source and the partition on the internal hard disk as a target without problems but when I press the restore button and the Image scan process is going to start I just get an error that says "Unabke to scan Mac-OSX HD. Resource busy". When I try the SCAN BEFORE RESTORE command on Disk Utility on the image I am getting "Unable to scan MAC IMAGE.DMG (Not such file or directory)".
I have already erased my startup disk and really need to get this image back in place. It is the only backup I have of my data.
Can the administrator unlock a disk image that another user made?
Info:
iMac, Mac OS X (10.7.2)
I have just finished setting up my first Lion Server from scratch on a Mac Mini with dual 500GB Drives which I set up as RAID 1. I have the server exactly as I want it, and before the users start logging on and it gets all screwed up I would like to create a disk image of it so that I could reinstall if necessary w/o having to start from scratch.
Is the process of creating a disk image for a RAID 1 any different than that of a disk image from a single drive set up? Will Disk utility just see this as a single volume or will it want to create a disk image of the entire RAID? i.e will the disk image be 1 TB (500 GB x 2)? And when it comes to reimaging my RAID, will I just recreate a RAID 1 and be able to write to it from that disk image?
I go into System Preferences->Dektop & Screen Saver. As the program "loads" availabe image sources and such I get a pop-up requesting a password to my secure disk image. Yes, I have a secure disk image in my home directory. Yes, the secure disk image is currently "locked" (Not mounted in finder).
I click cancel (a few times, probably 2 maybe 3 times) and things continue along fine. I select a photo source that I want for a screen save and exit peferences. I then go an start the screen saver (I'm using Hot-Corners). I get the message "Looking for pictures....." for , well...basically forever...
Sure enough I touch the mouse to leave my screen saver and there is the pop-up again. Asking for me to unlock my secure disk image.
I thought this might be related to Spotlight. I tried reading several threads and have gone as far as taking my entire hard-drive/volume and putting it into the "Privacy" tab under spotlight.
how I might get it so the "Desktop & Screen Saver" stop prompting me to unlock my secure disk image? (WITHOUT having to make sure the disk image is unlocked before I sleep my screen or open the screen saver utlity) As always, I am only speculating that this is Spotlight related so that could be a red-herring....
Info:
iMac, Mac OS X (10.7)
I've notice that when time machine does a backup to an external drive it creates a file "image backup" I would like to know why is this file empty? I've check through all my backups and everytime this file appears to be empty.
Also when Time Machine does a backup of your computer, then all the photos from photobooth should appear in the photobooth library file right?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
Want to make backup of Lion downloaded from App Store. No disk image in downloads folder.
Info:
Mac Pro, Mac OS X (10.6.8), 2 x 3.2 GHz Quad-Core, 10GB ram
My IMac keeps freezing on time machine finding backup disk, it selects it fine and authenticates, the ready nas pro drive works fine other than this nothing shown in logs and firmware up to date, used to work fine.
Info:
iMac, Mac OS X (10.7.3)
I have port forwarded port 46 (TCP and UDP) to port 548 a Mac mini server running Mac OS X 10.6.8, and I have Time Machine backup disk on it set as a share point with Time Machine support enabled. On my Mac Pro running OS X 10.8.5, I am able to connect via AFP to my server with the address "afp://my-ip-address:46" and can read and write on the backup disk share point. I tested that, and it works. When I am on the same LAN as the server, I can use that disk for Time Machine and have been doing so for years. However, I cannot do a Time Machine backup to that share point over the WAN. When I open Time Machine preferences, I can select the share point as my backup disk, but once I start the backup, it says "Backup disk not available" and fails to start.
In case you're wondering, I forward port 46 to port 548 instead of port 548 to port 548 to minimize hacking attempts. Last time I used a default port, a computer in Taiwan started spamming SSH authentication failures.
I have a 500GB HD in my mini.I have a 2TB drive with about 1TB of files on it. Can I use some of the free space for backup and still use the rest for files?
Info:
Mac mini, Mac OS X (10.7.3)
i was using HP simple save for time machine, but after some time the disk stopped working and it refused to backup any more stuffs, i am damm sure that no hardware problem is there as because my hard disk is new. please do provide me the solution for this.i am showing you the error message.
the hard disk is 500 GB. Verifying partition map for “HP Portable Drive Media”Checking prerequisitesChecking the partition listChecking for an EFI system partitionChecking the EFI system partition’s sizeChecking the EFI system partition’s file systemChecking all HFS data partition loader spacesChecking Core Storage Physical Volume partitionsChecking storage systemProblems were found with the partition map which might prevent bootingError: Storage system verify or repair failed. this error has apperared when disk utility was running on my disk. & the disk is getting ejected automatically after 10-20 secs of inserting it to the USB hub.
Info:
MacBook
Pro, Mac OS X (10.7.4)
i forgot the synchronising password for my mac pro lion backup disk
Info:
MacBook
Pro, Mac OS X (10.7.4)
