I use Carbon Copy Cleaner to backup. I've set it to backup to a sparse, rewritable disk image. If I, say, delete a file, then do another backup, will the file I deleted still be in the folder it was in, or will it disappear as if the backup was cleared and redone?
View 2 RepliesI sent my old and dying machine in and the service place cloned it over to my new machine. All seems to be identical except a sparse disk image that I had to protect personal files. It's just not there. I haven't been able to get onto the old machine to verify yet if it's still there. Would the cloning process have left it off the new machine? Would it's location inside the library folder of my hard drive have become noticed during the cloning process? Could the tech people have cracked it open? Nothing earth shattering on it but still personal stuff.
View 6 Replies View RelatedI've deleted 6 backups already and am left with three but the size of the file hasn't changed at all. I don't want to delete the whole thing and start over.
The file size now is 330gb which is ridiculous to me that it hasn't changed one bit since i deleted 6 backups.
(Using Snow Leopard 10.6.2). Over the last 12 months or so, I've managed to fill up the "Backups.backupdb" file on the external HD to about 400GB. I'm pretty confident that I have all these files safely backed-up (in other other files) on the same external HD. So, I thought I'd have a clear-out and get rid of the contents of this "Backups.backupdb" file on the external HD. I followed the instructions on this page: [URL]
So, I could see (after I did it), that when I entered into Time Machine (with the timeline and universe landscape backdrop) all the files had gone. But when I looked into the "Backups.backupdb" file on the external HD, the files were still there, so I highlighted them all, and placed them into the Trash. I've not emptied the trash yet, but before I do, I just wanted to ask, was is this ok to do, or can it cause problems to just delete the files from the "Backups.backupdb" file on the external HD?
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I took the advice of people online and created a sparse image file as a way of password protecting folders on my hard drive. Worked well for a while. These days, when I try to add or delete files from that sparse image, I get error 61 code. Why can't I write/delete from that mounted image anymore?
View 4 Replies View Relatedfor the past month or so my automated backups with time machine/time capsule have not been working. Every so often the following error message pops up:
"the backup disk image could not be mounted"
in troubleshooting, i have tried to mount the sparsebundle image directly but without success. from reading around a bit i can see that others have had this problem, and that one solution is to delete the sparsebundles and start again.
but that of course means losing all my archived backups, which i would rather avoid.
I want to use Time Machine, but I don't want to have all my data sitting in the open on an external drive that someone can just carry away. Can I make an encrypted disk image, and have Time Machine use that as the backup volume?
View 2 Replies View RelatedSo my current backup strategy uses two western digital external hard drives. The first I have permanently connected to my iMac using Time Machine. On the second I use CCC to backup to every week and keep it in the trunk of my car as an offsite backup.
Just had a couple of questions to make sure I'm prepared for the worse...
- What temperatures can hard drives survive at? Is there a risk of it overheating in my car?
- I've read about some issues with CCC's backups. I'm currently backing up to an encrypted disk image - is there any way to verify the backup? If I just cloned the drive instead so it was bootable is there any way to encrypt it? And is Super Duper more reliable?
Can I make a disk image of my macbook pro for backup? I'm using Lion, have 8 g memory and 500 HDD.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
The following error message just popped up: "The backup disk image “/Volumes/Data/Robert's Office iMac (2).sparsebundle” could not be accessed (error -1)." I'm running a late 2009 iMac; upgraded to Lion about a week ago. It seems to have done the Time Machine backups fine for the last week.The only other recent change was to reset my iCloud account so I could sync with my iPhone.
Info:
iMac, Mac OS X (10.5.5)
Recently I haven't been able to backup. Why this is? Not too sure. I don't remember changing any settings or anything recently but within the last 2 weeks or so I haven't been able to backup at all. When I start backing up it says "preparing backup" then an error message pops up that says "The backup disk image could not be mounted".
View 24 Replies View RelatedI'm just curious as to what everyone's backup strategy for Windows is? I've been exploring the options of the Windows XP Backup utility, but I also like being able to have a entire disk image with Winclone. However there's no way to back up incrementally with Winclone. I'm sort of mum on both options, or would like to know if there's a better option? So what have the other Boot Camp participants been doing for a Windows backup?
View 7 Replies View RelatedI get the following message when attempting backup - the backup disk image"/volumes/data/rod Henderer's computer (5).sparsebundle" could not be accessed (error - 1)
Info:
time capsule, Mac OS X (10.7.3)
Two days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end. TM sees it and it is mounted but cannot go any further
Info:
Mac OS X (10.5.8)
I have an external disk drive, with which I can easily replace hard disks. Normally, I use my 2TB disk for TM backups but I had to remove it temporarily from my disk drive. After I have reinserted it (everything was fine) and mounted it, TM did not recognize the old backup bundle and failed to backup, because there is not enough disk space available to create a new backup bundle.
When I look at the root directory of my backup volume, I recognize that Finder has lost the sparse bundle bit and my backup is shown as normal directory.
How can resolve that without erasing my disk and creation of a new backup??
After I backup my computer onto a Hard drive using time machine, I delete certain folders off my computer, then assuming my files are on the HDD, I go back to the HDD to see the files, but the files on the Time machine back up are gone! What is happening? and how do i prevent this from happening?
View 4 Replies View RelatedI have deleted the photos off my camera manually and wanted to change it to shoot in RAW but then when i connected it back up to upload using 'Image Capture', the old image files show up as missing, and the new ones not at all so i changed back to jpeg format, but the problem wont go away
it seems like its saved the old image info in a cache or something can i wipe it clean and start over some way?
All of a sudden my computer (imac, 10.4.11) won't let me open images downloaded from digital cameras (I've tried several - so it's not the cameras). I get the following error - "Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize." Also the same basic error when using Photoshop and Fireworks. I can open files still on the camera, or saved to a CD - just not anything dragged to the desktop. I can still open pictures which had been previously saved - but nothing new. I ran the Repair Disk utility, which found and apparently fixed an Illegal Name error on the hard drive, but the problem still persists.
View 5 Replies View RelatedI'm using a 2GHz PowerPC G5, OS X 10.4.11, with 1 GB on one dimm. I cannot open ANY .dmg files. I have tried clicking the image, and also on a clean download used "open with" each time I received the following message The following disk image failed to mount
Reason: Device not configured
I have followed the instructions in this thread:- Disk image failed to mount: Device not configured.
Firstly Run /Applications/Utilities/Disk Utility.
Click on "Macintosh HD" in the left column and then press the "Repair Disk Permissions" button.
Delete the file called /System/Library/Extension.kextcache
Delete the folder called /System/Library/Caches/com.apple.kernalcaches/
Restart
That made no difference. I then tried bobw's advice here Panther - Disk Image "mounting Failed" Panther - Disk Image "mounting Failed". That made no difference. I have since gone on to justanswer.com and the advice I received was to do an archive and install and then a full combo update.
I take total bootable backups of my macbook pro with superduper application, to an external hard disk. In a few months I plan to buy a new mbp, and I would like to know if it is possible to 'copy' my whole osx system environment(applications, data, everything) to the new machine, using this superduper backup, with the appropriate restoration process.
Can I boot the mac from the external hard disk, then run superduper, and use 'copy' option of superduper to copy the osx environment from external hard disk to internal hard disk? I think that everything should work fine but I do not know if it will appear any new hardware/configuration problem.
I'm trying to install Windows 7 on my mac. I'm using bootcamp assistant to try and partition my hard drive, but it gives me an error saying it cannot partition it because of unmovable files or something along those lines. Is there any way to get around it, and if I do use my OSX install disk and run disk utility to repair the drive will my files be deleted?
View 4 Replies View RelatedMy air is saying my start up disk is full. How do I delete files from it? Is there a specific location I'm supposed to delete from, or is it just general files from everywhere--email, etc.
Info:
MacBook Air, iOS 7.1.1
Apparently, there are two ways to convert disk images in CDR format to ISO format:
1. Rename diskimage.cdr to diskimage.iso
Or
2. hdiutil makehybrid -iso -joliet -o diskimage.iso diskimage.cdr
The first method is really quick while the second method takes quite a long time. Do the two methods yield the same ISO file? In particular, I would like to convert a bootable CDR disk image to an ISO disk image.
I was backing up my drive this evening. I left the Mac alone and realised when I returned that Time Machine deleted my oldest, and most important, Time Machine backup.
It's on an external hard drive.
Is there any way to recover this at all? This is so massively important!
I'm not sure if im doing the process right but whenever I try to resize a disk image it doesnt work, I go to disk utility/resize then I select the image I want to resize, nothing happens and I am stuck with the same size that is no longer big enough for my needs.
View 3 Replies View RelatedWhat's the Best Application to make a bootable disk image of your hard drive ?
View 5 Replies View RelatedI feel stupid for asking this but why do some applications leave a disk image on the desktop after it is installed? you can eject it and it goes away but then reappears every time you launch the program again. I noticed this happens mainly with applications you get off the web such as Google Earth. It is very annoying because I like to keep my desktop clean. So my question is how do you avoid having this disk image appear every time Google Earth launches for example. Is it normal for some programs? or did I install it wrong?
View 4 Replies View RelatedI bought Office 2011 for mac from a reputable academic download company. I downloaded the file today and tried to launch the disk image, but when I do I just get a message that it couldn't be launched because it is 'unrecognised'. Why? I did a Yahoo search but couldn't find an answer. Would some bright spark amongst you please come to my aid?
I am using a new MBA running Snow Leopard, if that makes a difference.
