OS X Mountain Lion :: Time Machine Backup Disk Not Available Over WAN?
Aug 25, 2014
I have port forwarded port 46 (TCP and UDP) to port 548 a Mac mini server running Mac OS X 10.6.8, and I have Time Machine backup disk on it set as a share point with Time Machine support enabled. On my Mac Pro running OS X 10.8.5, I am able to connect via AFP to my server with the address "afp://my-ip-address:46" and can read and write on the backup disk share point. I tested that, and it works. When I am on the same LAN as the server, I can use that disk for Time Machine and have been doing so for years. However, I cannot do a Time Machine backup to that share point over the WAN. When I open Time Machine preferences, I can select the share point as my backup disk, but once I start the backup, it says "Backup disk not available" and fails to start.
In case you're wondering, I forward port 46 to port 548 instead of port 548 to port 548 to minimize hacking attempts. Last time I used a default port, a computer in Taiwan started spamming SSH authentication failures.
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation homeÂ
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.Â
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).Â
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
Time will start a new complete backup every week or two. No long term back up.This is the message I get; "Time machine completed a verification of your backup on "GoFlexHome". To improve reliability, Time Machine must create a new backup for you"
My 2008 iMac bit the dust but I did consistently back up using Time Machine to an external drive. I plan on replacing it but need to get some files off the backup soon. Is it possible to connect my external backup drive to a friends iMac and copy just the files I need?
I'm one of the unlucky owners of Macbook Retina 15" Mid 2012. I was very satisfied with this computer, everything was great, untill I installed OS X Mavericks. My computer started to have GPU Panics all the time under some "heavier" usage like watching long videos on YouTube. I googled this problem and then I saw that I wasn't the only one, many people had problems after upgrading to Mavericks. I also read that downgrading to Mountain Lion solves the problem, but after the Internet Recovery update, when you are restoring your mac, it restores as Mavericks. I read Apple instruction how to revert os x, but it requires Time Machine backup from Mountain Lion, I already downloaded ML Installer from AppStore but I don't know how to install it.Â
I can't copy a Time Machine backup file (Backups.backupb) from one external hard drive to another. Both hard drives are Seagate 1TB Backup Plus. The Backups.backupb file is about 275GB. When I try to drag and drop the Backups.backupb file from one drive to the other (which I've tried three times) it to begins copy but after about 3GBs are copied I get a message that says "The operation can’t be completed because an unexpected error occurred (error code -50)."Â
I formatted (erased) the new hard drive with Disk Utility as Mac OS Extended (Journaled). Apple Support says I should format the new drive in Mac OS Extended (Journaled) "with a GUID partition," but I don't see the GUID partition as an option when I format the drive. Is this necessary, and if so, how do it do it? I'm using OS 10.8.6 on a 2012 MacBook Pro retna.Â
I also tried copying the backup files to another drive (a Maxtor HD) and got the same error message.
For the past two weeks I've been having some major issues backing up my computer with Time Machine. It's become quite a process.Â
iMac 27", Mountain LionÂ
I am backing up to a brand new - well bought in February, '14 - 1TB external hard drive and there is NOTHING else in there except the TM backups.Â
For the past two weeks it's been failing the automatic backups. There is PLENTY of room on the drive.Â
The exact error message reads:"Time Machine ErrorUnable to complete backup. An error occurred while creating the backup folderLatest successful backup: [time and day entered here]"Â
To remedy this at first it was as easy as un-mounting the drive and then plugging it back in and it was fine.
Now I've got the disk utility open and constantly repairing the drive and this is only a temporary solution.Â
Below is a small sample of the report from the utility each one is dated.
How to fix this without having to purchase a new drive? In February the old external drive I had started to freak TM out and it just erased ALL my backups which I desperately needed due to the same error / failure. That drive had plenty of space as well but I lost all my stuff anyway.Â
I know the TM isn't for archiving and another question I have is, How can I transfer or even rename the backup folder that TM makes and move it to a 'free drive' to prevent overwriting? Right now I just keep buying new drives which is ridiculous.
I excluded for one TM backup a sparse bundle disk image that I have been backing up regularly. I then immediately removed the sparse bundle disk image from the TM exclusions list, and now TM wants to back up the entire sparse bundle disk image, which contains an iPhoto Library (80GB). It seems that TM does not "see" the previous disk image backups.
Info: iMac, OS X Mountain Lion (10.8.5), 21.5-inch, Late 2009
My time machine backup isnt working for the last few months. The backup is located on a QNAP TS-670. Â
I can look for the TM and the iMac see the TM, but if I start the backup, a popup comes up. "The image of the backup-volume "/Volume/TMBackup/Danielas iMac.sparsebundle" cant be accessed. (Error -1)
Maybe it is not the exact error message in english, but I hope you know what I mean. Im working on a german system.Â
I can access the TM-Share through the finder (share: afp://[...]).Â
Here is the log I've got from the terminal:Â Danielas-iMac:~ danielawendling$ tail -f /var/log/system.log |grep backupJun 6 14:43:36 Danielas-iMac.local com.apple.backupd[323]: Failed to eject volume /Volumes/TMBackup (FSVolumeRefNum: -105; status: -47; dissenting pid: 0)
We have two Macs. I use my Mac for work and Time Machine to keep a backup of my Mac every hour. Occasionally (every few months) I'll unplug the external hard-disk from my Mac and use Time Machine to backup my wife's Mac. Hence, two Macs, both using the same hard-drive to backup to. Recently there is only the space on the disk for Time Machine to keep backups of my Mac from the previous day.
Is there a way to delete backups of my wife's Mac to give my backups more space? Can I simply open the back up disk and delete a few of the backups of my wife's computer? or do I need to do something more complicated like partition the disk? or is there a way to tell Time Machine to keep more of my backups and less of my wife's?Â
I am backing up my data from my mac book pro for a second time. I plug in my external, and it says it doesn't have enough memory to back up my computer. I have 1 TB hard drive and used about 650 MB for the first back-up. Obviously I don't have enough to back up everything for a second time. I just want to back up the new stuff. When I go to exclude the current external from the new back up, it's grayed out. Do I have to delete the contents of the hard drive and re-back up the entire computer?
Ok... So, I have an extremely slow Time Machine backup. Many people do. I've gone through the motions and tried to resolve the issue by doing the suggested restart in Safe Mode. I even followed some of the other tips that are on this string: slow time machine backupÂ
Nothing has worked. I don't use Norton Symantec but I didn't the Norton Remove script through the Console already. I don't run any anti-virus software. Â
This started when I was backing up to at Time Capsule. I backed up to the TC for years before this started. I then moved to backing up (started fresh) to a external HD connected via USB.Â
I have a 2010 Mac Mini with OS X 10.9 (Latest Version)Â
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Have made many manual Time machine Back ups that calculated the differnce and adjusted the differnce in what was then saved. The very size of the external HD did not roll over. Yet the calculation states a entire new Back Up. Is this a permission changing issue? Or what?
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.Â
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
I have a question which I am quite unsure. I am shopping for a HDD drive (Western Digital My Book 3 TB) and was told that it cannot be reformatted to be compatible with TIme Machine.
My IMac keeps freezing on time machine finding backup disk, it selects it fine and authenticates, the ready nas pro drive works fine other than this nothing shown in logs and firmware up to date, used to work fine.
I have a 500GB HD in my mini. I have a 2TB drive with about 1TB of files on it. Can I use some of the free space for backup and still use the rest for files?
Is time machine already/still supported on current OSX 10.7, or is it already deprecated as it was introduced several releases ago? When I try to activate Time Machine on my all new OS X Server, I get a dialog "Choose destination volume for client Time Machine backups:". I choose a volume, and the message is displayed "This disk drive may not support Time Machine backup over the network. Get more information about compatible drives."
"More information" links to [URL] which just provides commonplace advice to not disconnect drives while the drive is in operation. The support article is marked as archived and no longer updated after 10.5. The promised information is not provided. Is there anything obviously wrong with the setup?
Mac Mini Server, OS X Lion 10.7.3, 2x750 internal disks as RAID1, new of this month External drive: 3TB USB3 Maxtor, single partition (repartitioned for GUID), connected via one of the internal USB2
The external drive is also used as Time Machine for the Server's local volume. I have read recommendations to use separate partitions per client, for time machine solutions using a third party NAS. Instead I chose the original - am I wrong to assume that the OS X Server's Time Machine service is able to manage multiple clients?
What if a Time Machine backup was created on a Mac with a large hard disk, e.g. 500GB iMac - and I buy a new MacBook Air with a small SSD hard disk e.g 128GB. What happens when I need to use the larger Time Machine file to set up the new MacBook Air? What happens to all those files that can't fit on the smaller SSD drive?
Moved all my movies audio etc and stored on external HDD, but as I have lion and time machine it saved a local back up so that when time machine was synced it didn't miss anything.Seems sensible, so next step was to sync time machine, expecting that the local back up would disappear when it shifted to TM. It didn't...why in gods green earth is the local back up there even though TM connected the whole time and up to date? Â I've restarted, loaded all updates and verified disk. How do I get to the "it just works" part without having to Delete this double up (32GB "backups") via terminal etc....
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry 2. No matter how many times I reformat it, it always fails 3. I tried one trick I googled - deleting the "inprogress" file - does NOT help 4. SMART status is verified 5. There are no problems if I verify/repair the disk.
I want to use Time Machine, but I don't want to have all my data sitting in the open on an external drive that someone can just carry away. Can I make an encrypted disk image, and have Time Machine use that as the backup volume?
I'm interested in replacing my 250GB HDD for a 80GB SSD. I want to use the old drive as a USB backup disk for Time Machine, but is 5400 RPM fast enough for this?
I keep getting message "time machine is read only".....I check "get info" for time machine disk and it is set to "read-write"..Can't backup any files....even though there is 71gb free on disk..
