OS X Yosemite :: Computer Audio Output Stopped Working After The Update

Dec 4, 2014

After upgrading to Yosemite, my computer is no longer an option in the sound preferences. I can't hear anything.

View 2 Replies


ADVERTISEMENT

OS X :: Imac Headphone Output Stopped Working?

Feb 4, 2009

My internal speakers work fine. When I plug in headphones, the left side has normal audio for about one second, then becomes barely audible. The right side is barely audible all the time. If I unplug them, and re-plug them, the same exact thing happens. Everything looks good in the sound properties page. I know the headphones work because I tried them in another device.

View 10 Replies View Related

MacBook Pro :: HDMI Output To TV Suddenly Stopped Working

May 28, 2012

I have a one month old "late 2011 model" unibody Macbook Pro where the HDMI output just suddenly stopped working with no changes in configuration. I've tried resetting the PRAM and SMC, switched HDMI cables, cold rebooting everything, tried different HDMI ports, different resolutions on the TV and switched audio output settings, nothing works. When I plug the cable in the Mac switches resolutions, recognizes the TV in the Displays preference panel and correctly identifies it as a Toshiba, but doesn't send any audio or video signals to the TV.

Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)

View 1 Replies View Related

Intel Mac :: Audio Output Is Not Working?

Jul 2, 2012

The audio jack in the back of my iMac is not working. This has happened off and on before but it seems to have totally failed now. There is supposed to be a red light visible inside the jack. I believe the digital output is sharing this jack, there is no red light working now also. I am using a USB to M-Audio box to send my sound to my speakers right nw.

Info:
iMac, Mac OS X (10.7.4)

View 4 Replies View Related

MacBook Pro :: Optical Audio Output Not Working?

Jan 19, 2010

I have purchased a optical audio cable to hook up my 15" mbp to my LCD.One end is the toslink and the other end is the toslink adapter, when I put both end into its place. The speaker icon turns gray and I cannot adjust the sound level and the music stops from the laptop speaker.Also, the optical digital audio out option is not showing up in audio preference.

View 4 Replies View Related

MacBook Pro :: External Speakers Not Working For Audio Output

May 21, 2012

I have owned my MacBook Pro since June 2010, and have always used a pair of independently powered (via adapter) external Dell speakers for audio output. Since upgrading to Lion about 1 month ago, I was having intermittent audio issues, which were resolved by re-starting my computer (not ideal but it worked). Today, the speakers just stopped working. The internal speakers work, but when I plug the externals into the headphone port, they don't produce sound. Earbuds in the same port also don't work (I know the earbuds are good). The external speakers are being recognized by the sound panel in system preferences.

Info:
MacBook Pro, Mac OS X (10.7.4)

View 3 Replies View Related

MacBook Pro :: Downloaded Latest OS X Update - No Audio Output For FaceTime / Skype

May 16, 2012

I recently downloaded the lastest OS update (Lion X 10.7.4) on my MBP that I purchased in November of 2011, and since downloading it my MBP has been making a constant "humming" noise from the right speaker/disc drive area. I also don't have any audio output for FaceTime or Skype. I attempted to use Photo Booth to record a video and it doesn't record any audio. I attempted to reset SMC and reinstall Lion with no resolution of the problems.

Info:
MacBook Pro, Mac OS X (10.7.4)

View 4 Replies View Related

OS X V10.6 Snow Leopard :: Quick-look Has Stopped Working - Update Or Reset It So It Starts Working Again?

Jun 20, 2012

Quicklook has stopped workingon my MacBook Pro OS 10.6.8.  Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?

Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)

View 5 Replies View Related

Mac Pro :: Front Audio Jack On Mac Pro Just STOPPED Working?

Mar 27, 2012

I use my front jack ALL the time. It stopped working from one second to the next. confirmed that it is NOT the headphones. checked preferences, seems ok. 

Info:
Mac Pro (Mid 2010), Mac OS X (10.6.8)

View 7 Replies View Related

OS X Yosemite :: Email Stopped Working After Upgrade

Dec 1, 2014

I am receiving the following message when Itry to send an e-mail: 

"Cannot send message using the server SMTP"

Info:
iMac, OS X Yosemite (10.10.1)

View 1 Replies View Related

OS X Yosemite :: PS3 Controller Randomly Stopped Working

Dec 12, 2014

So my paired Bluetooth PS3 controller just stopped connecting with my mid-2011 iMac today. It says it is connected in the drop-down Bluetooth menu, I can see the flashing red lights, but it no longer works with any of the games it did 1-2 days ago.

I did download USB Overdrive to use the PS3 controller plugged in (with Expendabros, which was crashing when I tried to use the controller wirelessly, a known bug) yesterday, and it worked with that. Anyway, I made sure Overdrive was not selected as active in System Preferences. I tried that little reset button on the controller itself. Charged it, of course (it was almost full anyway). Restarted my computer. Add resetting SMC and PRAM (the latter always makes me nervous, as it really screwed up my wifi settings once) to the list. I tried removing the device from the drop-down menu bar list and repairing, no luck. Is it odd that it is showing up in the drop-down list, but not in the list in Bluetooth System Preferences?

In addition, I looked at my System Profile, and the PS3 controller is listed as NOT paired...Lastly, I tried to find com.apple.Bluetooth.plist in "Preferences" under Library (to try deleting it), but I couldn't find it. I did find com.apple.I don't believe there were any OS updates recently that could have changed Bluetooth somehow.

Info:
iMac, OS X Mavericks (10.9.2), 2.7 GHz Intel Core i5

View 1 Replies View Related

OS X Yosemite :: HP LaserJet 1320 Stopped Working With Mac

Dec 6, 2014

I recently installed OS X 10.7.5 and now my HP LaserJet 1320 no longer communicates with my computer. I've searched HP site (refers me to Apple for updates), installed all update from Apple, deleted and re-added the printer,

Info:
iMac, Mac OS X (10.7.5)

View 4 Replies View Related

OS X Yosemite :: Mail Has Stopped Working After Upgrading (10.10.1)

Dec 5, 2014

Mail not functioning after upgrading to Yosemite?

Info:
iMac (24-inch Early 2009), OS X Yosemite (10.10.1)

View 1 Replies View Related

MacBook :: Audio Stopped Working But Showing Everything Normal

Jan 8, 2010

The audio on my 2006 MacBook has recently stopped working. I thought the internal speakers might have blown, but the audio doesn't work even if I use headphones or external speakers through the headphone jack.
When I use the volume control buttons, everything looks normal - I don't get that symbol that it seems most people do when their audio isn't working. The levels will go up and down but without the sound usually associated with the volume control. I checked out the sound option in System Preferences, and everything is normal. I'm running OS X version 10.4.11. I've tried rebooting and nothing changes. All the other threads I've seen seem to have that symbol when using the volume control, or something is different under System Preferences, but everything is normal.

View 5 Replies View Related

Mac Pro :: Audio Line-in Port Stopped Working Properly

Feb 22, 2012

I started to have a perplexing problem that I narrowed down to the audio in-put port on my Mac Pro (MacPro3 ,1). It was working fine then the sound level increased and the quality became distorted (like a "fuzz base" but affecting all sounds)I was in the process of digitizing records, and believed the record played broke. So I got a new record player (audio-technica AT-LP120-USB). The same thing occurred with the audio in-put port, so I switched to the USB port and the audio was fine. I also checked with music already on my HD and it played fine. Consequently it has to be the in-put line port and/or a software issue.

Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)

View 1 Replies View Related

MacBook Pro :: Mini To HDMI Output No Longer Working After Update?

Sep 12, 2010

I have a 17" unibody MBP (most current version) with 10.6.4, and I downloaded the recent firmware updates for the MBP's. Before I did this, the mini port to HDMI video/audio output was working perfectly, I could watch anything right off my MBP. After installing the updates, when I plug in the cable, my MBP flickers, goes blue, and then comes back, but the TV does not detect the signal from the laptop. In the Display and Sound menus in System Preferences, there's no option to set up a second display like there was before.

View 2 Replies View Related

Software :: Logic Express Unable To Output Audio To Speakers / Output Is Fine In Headphones

Sep 18, 2009

For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.

View 6 Replies View Related

MacBook Pro :: Sound On My Computer Stopped Working

Apr 24, 2012

I should make sure "Built-in Output" is selected in my sound settings, but that option doesn't even appear. It's as if my computer forgot it had built in speakers...

Info:MacBookPro, iOS 5.1

View 1 Replies View Related

MacBook :: Trackpad Stopped Working After Software Update

Dec 10, 2010

I just got my macbook about 2 days ago I turned it off once and updated the software on it and when I turned it back on the trackpad stopped working. The pointer works when I use a USB mouse.

View 2 Replies View Related

Hardware :: Two Finger Swipes Stopped Working After 10.6.2 Update

Nov 10, 2009

As the title says, after I updated to 10.6.2, two-finger swipes suddenly stopped working on my Magic Mouse! It was working perfectly fine before.

View 4 Replies View Related

MacBook Air ::Headphone Jack Stopped Working Since Update

Feb 10, 2012

Sound is working fine on my MBA - but when i plug anything into the headphone jack i hear a millisecond of sound then nothing, as soon as i take it out again, it is still playing fine through built in speakers. I think it started happening after i downloaded and installed the latest update but i'm not 100% sure. Tested headphones, stereo etc. and nothing, working. (stereo & headphones work fine through iphone etc. so it's not the cable or the jack) It also does seem like it takes longer for the MBA to recognise something is plugged in? could be a software bug on the new update?

Info:
MacBook Air, Mac OS X (10.7)

View 3 Replies View Related

Safari :: Bank Links Stopped Working After 5.1.4 Update?

Mar 20, 2012

I use Safari to download my banking information.  After the last Safari upgrade (5.1.4) I can log on but cannot open links to the different accounts.  I can "exit" but cannot navigate deeper into the site.

Using early 2008 MacBook Pro 15 with Lion.  It won't work using my iMac but will work using Internet Explorer on a PC.

Info:
Mac Pro, Mac OS X (10.7.3)

View 11 Replies View Related

Software :: Apple Bluetooth Keyboard Stopped Working / Itunes Stopped Working

May 13, 2009

I installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...

Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...

View 7 Replies View Related

MacBook :: Trackpad Firmware Doesn't Update And Now Stopped Working (Lion & 13 Unibody Late 2008)

Jun 21, 2012

I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion. 

Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized). 

This is the "Trackpad Firmware Update" from the automatic updates. 

When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point.  

After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)  

Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)

View 3 Replies View Related

Windows On Mac :: Macbook Audio Output Low / Windows XP Partition Double The Output

Sep 24, 2009

I have a white Macbook, Intel Core Duo 2, 2 Gb Ram. (October 2008) Under Leopard, my volume (audio output is a shame); under bootcamp with Windows XP on the hard drive, volume is almost double: is there any work around on this?

View 3 Replies View Related

IMac :: Optical Audio-analog Converter For The Optical Digital Audio Output Port?

Nov 11, 2009

My friend is looking into buying the new 27" iMac Core i7 to replace his PC desktop. The only thing holding him back is that he has an analog surround sound system he uses for his speakers. I am having a hard time myself finding a converter that can make his speakers work in the iMac's optical digital output port. Any products out there that will do that?

View 12 Replies View Related

Mac Pro :: Audio Output On Two Interfaces

Aug 22, 2009

i want to output audio on two interfaces. the headphone jack and USB (bose companion 5's)

View 3 Replies View Related

OS X :: Audio Output Going Out Of Balance

Sep 1, 2009

I normally leave my speaker output balanced right in the middle (under System Prefs>Sound>Output), however I have noticed that my audio output has been going out of balance by itself recently.

One speaker will sound louder than the other and sure enough, I'll go to the system prefs and the balance will be off. Nobody has else uses my machine and I know that I don't ever touch the audio output.

I have an iBook G4 running 10.4.11 connected to a pair of Brookstone speakers and subwoofer.

View 1 Replies View Related

OS X :: Mac Audio/MIDI Says "audio Output Not Supported"?

Sep 14, 2010

My audio/midi setup says "output not supported". As a result when I plug in my Ipod, or a CD player, into the mic jack (audio input) on my Mac Mini I can't get the audio to play out of the speakers or headphone jack. I can see that the mic is definitely picking up a signal. I have a mac mini (solo intel) 10.4 OSX. Audio output from ITunes or music movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.


I have the "Soundflower" App. installed but turned off.

Does anyone have an idea as to why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source like my Ipod or CD player does not? WHY DOES THE AUDIO/MIDI SETUP SAY "OUTPUT NOT SUPPORTED"?

View 1 Replies View Related

OS X :: No Audio Output From External Input.

Sep 12, 2010

I have a mac mini (solo intel) 10.4 OSX. I have no audio output when attaching an external input source like a CD player or ipod to the input jack on my Mac Mini. Audio output from ITunes or movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.

I have the "Soundflower" App. installed but turned off.

why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source does not? Is there some software or a driver required for audio output from an external source that is not required for audio output from an internal source?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved