MacBook :: USB Not Working - Suddenly Stopped Working
May 31, 2010My MacBook's USB that near the shift key suddenly stopped working. Other works fine. cause I need to have both ports work. HOW do I solve this?
View 14 RepliesMy MacBook's USB that near the shift key suddenly stopped working. Other works fine. cause I need to have both ports work. HOW do I solve this?
View 14 RepliesOne of the 2 USB ports has suddenly stopped working and will not recognize any device.
Info:
MacBook Pro (13-inch Mid 2010), iOS 5.1
Today when I tried to connect my charger, the charging light suddenly went out after a few seconds. It's never done this before, and now my computer isn't charging. I looked at several problems that were similar to this, and I've tried everything short of replacing the charger. I followed the link to the article that explains what to do in this situation; I checked absolutely everything on my charger that it told me to, and cleaned off the area around the magnetic pins. I tested the charger in several different outlets, with no results.Â
I also followed the steps to reset the SMC. That didn't work either. Something else that's important to note is that there is an area on my computer between the MagSafe power port and the Gigabit Ethernet port that is damaged. The plastic covering between these two ports had broken off about a week ago, and there is a prominent gap between them. But, my charger was still working just fine before today. Could this damage still have something to do with why my charger stopped working?
Info:
MacBook Pro, Mac OS X (10.6.8)
It seems that during my afternoon class, I shut down my macbook and then when I went to use it about 10 minutes later the keyboard nor the trackpad works. Now the keyboard/trackpad is not defective as it works via the OSX install cd and it works in Windows Vista (dual booted) When ever I start up OSX it just comes up and the mouse is in the upper left hand corner, and the keyboard doesn't work at all. I have tried a pram reset by pressing command + option + p + r and that did nothing. When I am in OSX the only way to get out is to hold down the power button till the macbook turns off. What else could be wrong is there anything I can do, the nearest Apple store is about 80 miles away so I am trying to avoid that at this point as it seems like a software issue.
View 2 Replies View RelatedI have a network printer setup at my house, and it suddenly stopped working. Here's my setup.
Mac (printing computer): Macbook Pro, 10.6.3.
Router: Generic router.
"Server": Acer netbook running Windows 7 Ultimate
Printer: Samsung CLX-3170 series color laserjet
I use LPD and this is what I type in:
192.168.10.9 (This is the netbook's IP address.The printer's sharename in Windows 7 is CLX3175.This printer was working fine, but it just suddenly stopped working just now. Does anyone have ideas?
Two or three days ago, the topmost line of my keyboard (contains esc, brightness, expose, dashboard, play/pause, mute, eject, etc.) suddenly stopped working. Strangely, some of the keys have switched functions: expose opens a search bar, keyboard dimmer refreshes the webpage, keyboard brighter selects the web address, play/pause is now shows Spaces, skip forward is expose, and sound increase is dashboard. I reset my keyboard, but nothing changed.
View 3 Replies View RelatedI had my computer plugged into some external computer speakers (nothing where I had to downlaod any software, I have used these speakers before), and when I removed them, all of a sudden the built in speakers weren't working. I tried to adjust the vollume, but I get the volume image with a little "forbidden" circle and cross underneath. I tried adjusting the settings in System Preferences, but when I got to the audio settings there was only the one "Optical digital-out port". I then updated my computer, but still no luck. Lastly I went to Utilities and to Audio Midi Setup to reset everything to the default settings, but I am unable to adjust everything. It's all that lighter shade of grey that tells me I can't select it.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
I was charging my macbook. It was charging when I left, upon my return, after about 30 minutes, I found that the light was no longer green. There was no light on at all. I tried restarting multiple times. There are no stuck prongs in my power cord. I tried different outlets. I tested the outlet to verify it worked. My computer will charge fine with other power cords, but just not the one I want it to use? Is there anything else I can try before purchasing a new cord?
Info:
MacBook
The built in camera suddenly stopped working. Its detected in the system profiler but when opening image capture, it says its not detected.
For photo booth you simply have a black screen. Been told that re-install the operating system but will this wipe everything?
Info:
MacBook Air, Mac OS X (10.6.8)
Keyboard and Trackpad stopped working suddenly
Info:
MacBook Pro, Mac OS X (10.7)
I have a one month old "late 2011 model" unibody Macbook Pro where the HDMI output just suddenly stopped working with no changes in configuration. I've tried resetting the PRAM and SMC, switched HDMI cables, cold rebooting everything, tried different HDMI ports, different resolutions on the TV and switched audio output settings, nothing works. When I plug the cable in the Mac switches resolutions, recognizes the TV in the Displays preference panel and correctly identifies it as a Toshiba, but doesn't send any audio or video signals to the TV.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?
View 2 Replies View Relatedmy sound suddenly stopped working after i unplugged my headphones, how do i fix this?
Info:MacBook
Spotlight opens, but when entering a search the lagtime for each letter typed is slow, then a hang, then the wheel of death, then spotlight closes.Â
Info:
MacBook Pro, Mac OS X (10.7.4)
Suddenly command-W has stopped working on my system (OS X 10.6.4, iMac 2.66 GHz Intel Core 2 Duo). Instead of closing the current window or browser tab, it takes me to the Finder. I have tried rebooting, but it did not fix it.
View 4 Replies View RelatedI have a network with an Airport Extreme Base Station. I have two Macs connected by ethernet and an Iomega MiniMax hard drive connected to the base station by USB port. I have been running two printers, an HP Laserjet 1012 and Samsung CLP-315, connected by USB cables to the MiniMax hub. This setup has been running fine for several months. Yesterday, with no change in cabling, the printers stopped working. If I try to print to either printer, I get a message saying, "looking for printer..." If I connect either printer directly to the base station, I get the same message. If I connect the printers directly to either computer by USB cable, they both print fine. What can I do to get my original setup back working? I have tried restarting all the various components and reconnecting all the cables. I have checked to make sure I have the latest drivers for the printers.
View 3 Replies View RelatedMy keyboard has suddenly stopped working. at first the letter e was stcuk, now the i is gone... what can I do?
Info:
iMac, Mac OS X (10.6.8)
My Mail.app has been working fine with my [URL] account for yonks but has now suddenly stopped working. I either get a constant spinner next to the account or a warning sign that says something about bandwidth limits exceeded.
My blackberry gets my email fine, as does Evolution on Ubuntu 10.04. This has been on going for about a week and I've even archived any messages that have lots of pictures in them. Still no luck.
Mail is working with my other google apps accounts for about four different domains but _not_ with my [URL] account.
I prefer to view PDFs in Safari. However, starting this morning, when I click on a PDF file it opens in Preview. I checked Cocktail to make sure I hadn't accidentally disabled Safari's built-in support. I hadn't. How can I re-enable it?
View 1 Replies View RelatedMy iMac's built-in bluetooth suddenly stopped working. Can I troubleshoot or replace it? It is an early 2008 Intel iMac. Suddenly the Bluetooth logo changed to the one with the jagged line through it. Bluetooth no longer shows in System Prefs. In the hardware list under Bluetooth it now says, No information found.
Info:
iMac, Mac OS X (10.7.3)
my messages beta suddenly stopped working and won't restart after i repaired disk permissions on my iMac. what can i do?
Info:
iMac, Mac OS X (10.7.4)
2009 iMac running Snow Leopard.Â
NO issues until this morning. Put computer to sleep and it would not boot back up properly (stuck on Apple boot screen and it FINALLY came on after many tries). Now my wifi or ethernet won't actually "connect" to the internet. It says connected under network preferences and it's green, but I have no internet connection...Â
Info:
iMac, Mac OS X (10.6.8)
All of a sudden the copy and paste function just stopped working. I'm running a 2007 imac intel with Snow Leopard on it. Tried rebooting several times. I'm not even sure it's the paste, it will not copy. Not with key command, not with right click, not with drop menu. Tried different keyboard.
Info:
imac, Mac OS X (10.4.7)
The trackpad on my iBook G4 1.44ghz stopped working this morning! At first it went stuttery. I temporarily solved this by plugging in a mouse- without using the mouse itself, this seemed to make the trackpad responsive again.
After letting the iBook go to sleep, the trackpad doesn't work at all; nothing I do seems to make it respond. I've tried resetting the PRAM and NVRAM, but this hasn't done anything.
Is there anything else I can do, short of buying a new trackpad?
Last week, my airport connection suddenly stopped working (and I mean JUST as I was working on it, it started failing). It would connect to the network fine, but it could not communicate with the router through DHCP and even with a static IP, it could not transfer any network data. I put in my brother's working airport card, and it worked, so I ordered a refurbished airport card from ifixit.com. I put that in today, and it is showing the same symptoms of my old card. I don't have my brother's PowerBook to test his card again, so I don't know what to do.
View 1 Replies View RelatedMail suddenly stopped working with Comcast. They said it wasn't them.
View 1 Replies View RelatedI have a 27" iMac and I'm using Samsung SyncMaster SA850 as a second monitor (connected via a display Port cable with a mini Display Port adapter). Everything worked fine until yesterday - the Samsung screen turned black and now it only works with max resolution 1280 x 1024 (native is 2440x1440). I think I upgraded Lion 10.7.2 to 10.7.3 (I don't remember for sure though). When I connect the monitor to an iMac with 10.7.2 everything works fine. And another iMac with 10.7.3 has the same problem as me.
Info:
iMac, Mac OS X (10.7.3)
My bluetooth wirless keyboard suddenly stopped working. It started with the low battery alert, so I changed the batteries, however after replacing the batteries, it stopped working even though it says connected.
Info:
iMac, iOS 5.1.1
I have a western digital passport ehd with HFS+ formattnig on my mbp. It was working fine for months. I tried always to properly eject it, but occasionally I would meess up and improperly eject if like the HD fell off my lap and the cord came undone or something. Anyway, I think I really got myself in a pickle now. I was either downloading something and then forcequit which caused it, or restarted finder, or something where now my EHD is not even recognized. when plugged in to the usb it looks like it is recognized on system profiler as "vendor-specific" on disk utility it was recognized once and I didn't take the opportunity to try and repair, but instead tried to save data... bad move - now it doesn't even pick up on disk utility - just shows my internal hd. I tried resetting the PRAM - i don't know exactly what that does but I read I should try that somewhere.
View 8 Replies View Relatedfor about a year i've been using iweb to create a simple web page, which includes photo album pages, each with several albums that were put there simply by dragging and dropping an "event" from iphoto via the media browser. about a week ago, i tried to add some new photos and iweb won't take them. when i drag an event from the media browser to the albums page i want to add it to, i see a lightened image of the thumbnail, the green circle with the "+" sign, and the red icon with the number of images, but when i let go of the mouse button, the image bounces back to the media browser and nothing gets added to the web page. i've tried creating new, blank pages and adding them there, all with the same result.
View 1 Replies View Related