Can I toggle between Air Print and an Epson printer driver? The only way I can print directly on CDs with my Epson XP-810 is to use Epson's driver. Normally, I'd prefer to use Air Print.I'm running OSX 10.9.4.
Info:
2.8 GHz Intel Core 2 Duo iMac, 4 GB SDRAM, 931.19 GB drive
Just out of the blue, I can't print using my epson 600, a multi use printer that I have set up on my network.
The strange thing is my scaning driver is there and working, but my wireless printer is not there. I can see my Epson Printer, but its not the wireless driver, its the older driver for using the cable.
I've just loaded mac OSX 10.5.1 onto my Powerbook G4, and I've lost my Epson Stylus Colour 860 printer driver?
I've gone into the Print & Fax Pref's to add a printer, but there are no printers listed?
I've also looked on the Epson printer drivers to download and there doesn't seem to be any to support any OS later than 9?
which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
Info:
epson LX300 matrix printer, Mac OS X (10.7.4)
I have MACBOOK G4 OSX 10.4.11. Which driver do I need for the Epson Stylus PHOTO RX620 (and where do I get it?
Info:
MacBook
I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any. In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer..."
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1), printer driver
I have two perfectly good printers, but the drivers for my MacBook Air are said to be unavailable on the epson site.
Info:
MacBook Air, Mac OS X (10.7.4), Epson Stylus CX3200 & CX42OO printe
I have a MacBook Pro (running OS X 10.9.5). My EPSON (WF-2540) printer was set up and working fine. I went on a trip, tried to install Kodak printer driver (no success) and now my printer will not work. It shows in my list but I try to print a document I don't have any printers to select. I have tried:
- removing the software and reinstalling (from website and from CD)
- connecting the printer to my computer
- resetting the printer (under System Preferences, right click, reset printing system)
Error message states 'bad file descriptor'.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.5)
I have 2 software updates for my Epson CX5000 all-in-one printer listed in the Software update. The Printer Utility file/folder/software is missing. I have done multiple searches with no success in finding it in my iMac with the newly upgraded OSX Mavericks. It is so difficult to get the software for this printer. Unable to get it from the Epson site. Can get only from Mac Software update. Is there a way to remove the software updates which are the same and start anew? Updates are dated June 19th.
View 2 Replies View Relateddouble sided printing on mac. Since I changed to a mac, I havent been able to print double sided from my epson sx425w printer. This can be quite annoying if you a lot of pages to print. The double sided print option is just disabled so I cant even select it and I dont have the option of "Duplexer" or "Duplex Printing" as suggested in other posts. Besides, I've not been able to use my scanner since upgrading to Mavericks-I know others have had similar problems too.
View 2 Replies View Related10.9.4 with Epson WF 845. Queue opens, job appears to process out of the queue and the queue closes. Nothing happens at the printer. Only the one printer on the network. Have deleted & added the printer. Have reset the printer system. Printer wired through a Linksys WRT 1900AC and computers are wireless to the same router. Worked fine until the last day or so.
Info:
iMac, OS X Mavericks (10.9.4), Epson WF 845, Linksys WRT 1900AC
After the last software update my printer wasn't recognizing ink cartridge. So I uninstalled its software. Now I can't find its drivers anywhere. Epson's website says check your Mac software updates and doesn't offer to download the driver directly. But there are no available updates for my computer as of now. How do I find and install the driver?
Info:
iMac, OS X Mavericks (10.9.4), Epson Stylus Photo R3000
When attempted to install the Brother HL-1110 CUPS Printer Driver, it asks for the password to complete the installation and rejects the known password. the password no longer works at all. Any way round this, particularly to recover or reset the password.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Just got the Air but I'm stumpted. How do I add an HP 7515 wireless printer that is airprint supported to the Air?
Info:MacBook Air, Mac OS X (10.7.3)
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
I'm new to MAC and have a problem connecting my network printer to my MacMini:
Hardware:
1) Intel Mac Mini
2) Printer: HP laserjet pro 100 color mfp m175nw, WLAN switched off, connected via Ethernet to the same network as 1) and 3)
3) Windows PC
Problem:
I can't discover the printer from my MAC Mini. However, I can connect indirectly via the Windows PC which is sharing the printer resource in the network.
Question:
Is there a way to directly connect to the printer via Ethernet, so that I can print with my Windows PC switched off?
P.S: I can print with my iPAD connected via an AirPort extreme to the same Ethernet network.
Info:
Mac mini
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
View 24 Replies View RelatedI'm trying to add an Epson PictureMate PM 260 printer to my iMac, 10.7.3. When I plug it in I can see it in the Add Printer window, but when I try to install the driver, I get a message saying the "software is currently unavailable". I searched the epson site, but they don't seem to have drivers compatible with 10.7.
Info:
iMac, Mac OS X (10.7.2)
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I just updated my Mac I Book G4 from OSX 10.3 to 10.4. Now when I click on my Epson Smart Panel icon to start scanning I get a message that says Install the supported twain driver. I have downloaded the Epson Twain Driver v 2.77. I am told I need to uninstall the old Twain driver. How do I do that?
View 1 Replies View RelatedJust loaded snow leopard and my Epson Sylus Photo rx580 won't print?
Info:
MacBook
Pro, Mac OS X (10.6)
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have an Epson Perfection 3170 Photo scanner. It is a fine scanner that has served me well for many years through many different operating systems, Windows as well as Mac OS X. The scanner software is no longer supported by Epson for OS X Lion. The only way I can now san is by using the drivers that are built into the OS. I can access the scanner either through System Preferences/Print & Scan, or use Image Capture. Unfortunately, all the scans are of an extremely poor quality. I can no longer scan fibrant colors or stong blacks, the entire scan is now murky and all colors as well as the blacks and greys are faded.
Info:
iMac, Mac OS X (10.7.3)
After initial problems loading the driver of the CD I was advised the do a software update on my iMac and to download the latest driver from the Epson site in the U.S. Having done all of that and successfully loaded the software the iMac still cannot find the printer driver when trying to add a printer.
I have previously loaded everything and have printed via usb but have not been unable to print wirelessly. Has anyone any clue as to what I might try?
I have an Epson V200 Photo that has a button called "Send to Email" when it is invoked it loads Mail. I would like it to load Thunderbird instead of Mail. Does anyone know a way to modify the driver to do this? I contacted Epson and got nowhere.
View 4 Replies View RelatedI have checked multiple support sites, and all indicate the same shortcut. I even tried "adding" the shortcut in the "Application Shortcuts" screen in Preferences.
MacBook Air (2011?)
I have a Mac OS X with 10.6.5 version software. The Guttenberg (excuse spelling) driver works but the graphics printing has faults. So I would like to get the Epson (Epson Stylus Photo r200) driver working on the Mac. The Epsom software is the latest easyprint 2009 and after installation it was available for selection in the list of available printers and seemed to install okay. I have tried reinstalling, rebooting and have followed Epson's troubleshooting pages including resetting the printers and repairing permissions.
If I click "options supplies" on the "printers and faxes window" and then "utility" and then "open printer utility" it tells me that Epson printer utility 4 cannot be executed or the printer is not registered for this software and cannot function properly using the current connections. Is there somewhere else on the computer where I have to tell it to use the USB to print or do I have to register it with the computer or with Epson?
I have Mac OS 10.7.3 I keep getting the message 'there was problem connecting to server epson 6649b7. I go to that printer, which was never an active printer, but it will not allow me to delete it. The only option I am given is resume printing / supply levels / printer setup. Even if I correctly choose Epson WF600 as my default printer, I still get that message popping up constantly.
Info:
iMac, Mac OS X (10.7.3), Epson Work Force 600 printer
I purchased an Epson CX8300 recently to work with my iMac and MacBook. It works fine with both via USB connection. However, when set to print wirelessly via an Airport Extreme Base Station, the print jobs don't ever appear in the print queues on either systems. I tried switching to the Gutenprint driver but this just spits out one blank page after another.
View 1 Replies View Relatedanyone know where to find it?
View 5 Replies View Related