OS X :: Unable To Setup Printer / Computer Doesnot Recognize Printer
Aug 27, 2010
I have a pre-Intel iMac G5, running OS 10.5.8. I have been using an HP LaserJet P3005, connected with a USB2 cable, with no problems. The fuser got "muddy" on the 3005 so I bought a new HP LaserJet P2035n. I've loaded and reloaded the printer software from the provided CD, downloaded the driver software from the HP support website, but the computer doesn't recognize the printer. Called HP support and everything they suggested came up empty; they told me to exchange the printer for a another new one, but I get the same results with it. I'm using the same USB cable I used with the 3005 -- it worked perfectly with that printer as recently as this morning. What's wrong with my iMac or setup?
View 5 Replies
ADVERTISEMENT
May 28, 2012
a few days ago my printer would not print, and print request went to queue have tried to update and/or re-enter software withoust success?
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Apr 7, 2012
What can I do to get my computer to recognize my new printer, HP office-jet 7500A?
Info:
iMac, Mac OS X (10.6.8)
View 9 Replies
View Related
Sep 2, 2009
Since upgrading to Mac OS X Snow Leopard my computer does not recognize my printer (HP Color LaserJet 2600n) nor will it print. What can I do? I can't afford another printer already.
View 2 Replies
View Related
Oct 31, 2010
Recently I purchased a Canon PIXMA MG5220 wireless printer. I have installed numerous printers, software, hardware etc on other comps as well as this one and have never had a problem... until now. I connected my printer to the internet access port (my home network) and everything went fine. But when I put in the canon disk to load the software and add the printer to my comp, I click on setup, it prompts me for my user pw to allow install. I do that and when I hit ok, nothing happens...
No other window loads or anything. It's like there is nothing on it after the pw prompt. I tried it on a diff comp (windows based PC) and it worked fine... why wont it load on my iMac? Very confused. Also, I turned off my firewall thinking that would help, but it did not... any help is appreciated.
View 5 Replies
View Related
Nov 20, 2009
I attached my Imac to the Airport and the printer to the Airport. It's a Canon Pixma MX700. The airport utility sees the printer but when I try to print, the Imac does not see the printer. I hardwired the Imac to the Airport because I assumed the connection speed woud be better. Could this be the problem? I am able to get on-line from my laptop PC so I know the thing is working. I have not tried to print from the laptop.
View 2 Replies
View Related
Dec 8, 2009
I've been working on this for about 8 hours and I'm going nuts. I am using an Imac OS X version 10.5.8.I purchased a Canon MP560 today and can't figure out the problem. I don't even know where to start. I'm trying to connect the wireless printer using Airport. There is nothing listed when I click on 'Preferences- Print and Fax'.
I read the instructions that came with the printer several times, up to a point. I clicked 'wireless lan setup' on the printer. It's asking me for a lan access point and a wep key. I've used Google until I can't even think anymore. I read Airport is like a router, or can be used as a router. The blue light is on on the printer, and it says it's searching for a connection but can find one.
View 3 Replies
View Related
Dec 8, 2009
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 11 Replies
View Related
Jun 2, 2006
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 7 Replies
View Related
Oct 29, 2010
Hi, my brand new iMac 21.5" (just 2 weeks old) does not have the appropriate driver for my printer. My printer is a Samsung CLX-3160fn. The iMac has lots of other Samsung drivers, including one that's close (for the 3170 series), but the close one does not work.
Went online to search for driver but was not able to find one for Mac. Does this mean my printer is just not compatible with my iMac?
View 8 Replies
View Related
Nov 8, 2008
I have a iMAC running 10.5.5 and have connected a HP Photosmart C6280 Printer to it via the USB cable. Using Bonjour to connect a XP and a Vista box I get a error saying "ERROR You do not have sufficient access to your computer to connect to the selected printer". I am logged in as the administrator when I do it on the XP or Vista computer and have completed this function on other printer installation before so I know the permissions are there. The software for the printer is loaded on both windows computers.
View 5 Replies
View Related
Aug 22, 2009
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
View 2 Replies
View Related
Dec 3, 2010
I have been given an iMac g3 with osx 10.4.11 installed and airport card. My son will have this as his first computer. It is up and running and surfing the net using the airport connected to our home network. I have searched the forums and tried all the results I could find but am still unable to print from the iMac to my network printer.
iMac G3 10.4.11 osx slot loaded, airport wireless. Officejet all in one 6310 usb to pc running Vista. I have tried all the usual SAMBA and LPD methods listed going for generic printer, but get error 256 using printer utility, and NT_status_no_memory when using samba with all the settings, when trying LPD the printer service just stops.
I use LPD://user:password@workgroup/server/sharename and same for smb. I have set up a seperate account for the mac on the vista pc with password and started lpd service I've also edited the registry for lmcompatibility, printer sharing is enabled and both machines have the same workgroup name (WORKGROUP).
View 2 Replies
View Related
Jan 15, 2010
I got a new HP wireless printer, and the mac suggested setting it up with the USB first, and then disconnecting once it was configured. I did all that.The mac asked to choose a wireless network for the printer, I did. Then the set up CD asked me to add a printer to the qeue from system preferences from the menu- when I clicked my printer was already added. None the less I followed the direction, and then got the message "You already have a similar printer set up, would you like to add this too?" I clicked YES, and then continue.
When I clicked on continue, the set up cd (or mac) told me that I had NOT set up a printer from the Queue (sorry about spelling), even though I had. So when I clicked continue, it told me the printer was not recognized in the wireless network, and now I'm stuck with plugging it in the usb. Please I know this sounds confusing, but why is this happening and what do I do to get the mac to recognize my printer? Apparently its not.My wireless signal is fine, I checked.
View 3 Replies
View Related
Nov 1, 2009
I've got a four year old Macbook Pro 17", running 10.5.8 OSC, 2.33 ghz, 3gb 667 mhz ddr2 sdram.
The power cord was unplugged, although the battery was fully charged. I plugged in my Canon printer for the first time in over a year. It printed half a document, then the computer shut down. I pushed the power button and got the start up chord, but then it shut down again. Tried this a few times. Then I unplugged the printer and plugged in the power chord. it started, but it's very slow, and I keep getting the pinwheel.
View 6 Replies
View Related
Oct 1, 2009
I have a printer set up on my mac, and my roommate wants to be able to share my printer from his PC. I find lots of information how to do the reverse of this (Sharing a printer that is plugged into a PC from a mac), ive tried everything I know how to do and cant get the PC to recognize the printer
View 3 Replies
View Related
May 4, 2010
I wonder if you can suggest something? My MBP currently doesn't recognise the printer I have (HP OfficeJet 6210, which has worked before with this computer). In fact the list of printer models under "add printer" is now empty. So it doesn't detect any printer and I can't suggest any printer for it to detect. I tried reinstalling the "printers" part of Snow Leopard but it didn't change anything. What would be the best thing to do?
View 5 Replies
View Related
Mar 29, 2012
My mac book pro will not recognize my hp printer after years of knowing it's connected. USB port works fine with other connections. I have reinstaled it. What do I do?
Info:
MacBook Pro
View 1 Replies
View Related
Dec 4, 2014
I see that many people are having problems with trying to get OSx to realize they have installed the most recent HP Software update, but I'm specifically having a problem getting my Mac to recognized I no longer have an HP printer!
I removed the printer from my printer list, I deleted the Library file (so far as I can tell), but I am STILL being asked to update the HP Software.I just clean installed Yosemite, but recovered my file from a Mavericks Time Machine Backup.
View 3 Replies
View Related
Sep 3, 2014
I am running OS X 10.9.4 in a MacBook Pro, Photoshop CC, and a Canon printer MG8220. I have installed the plug in Easy-PhotoPrint Pro that is advertised at the Canon site as fully supporting that printer. When I automate the plug in from Photoshop it does not work, allegedly because it does not support the printer. It may be be that in fact this is the case but Canon people insists in the compatibility. I have come to think that it may be a matter of drivers, but I have failed to determine unambiguously which one is driving the printer. Then, where can I check the drivers and/or replace them? Although this a matter between one hardware and two softwares clearly not Apple...
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 6 Replies
View Related
Sep 11, 2014
I have a MacBook Pro, OSX 10.9.4. The printer I use is an HP Photosmart Premium. I have always been able to print wirelessly from my laptop. Today, for some unexplained reason, it is not. I have a desktop, Dell, and I am able to print from that. When I try to print from my laptop, nothing happens and there is no printer icon on the dock as there normally would be. When I open the printer preference box, it shows the printer as idle. My wireless connection is also working properly.
View 2 Replies
View Related
Feb 25, 2009
I am new to using mac and just got a new HP printer to replace my old hp printer. If I understand correctly I click and drag my current HP printer file/icon to the trash and then search for additional files using applef to delete the rest. Is this right? Am I missing any other crucial steps? If the brand is the same do I need to remove the additional files?
Also and this may be a stupid question, but how do i make sure that my computer does not recognize the old printer for my wireless network when I set up my new one?
View 3 Replies
View Related
Aug 8, 2010
I'm trying to set up my old iBook G4 as a print 'server' for other Macs on my network. I'm having a problem getting the other computers on the network to SEE the shared printer from the iBook. They can see the iBook as a network computer, but can't seem to connect or even 'see' the usb printer. I've clicked 'Share Printers on the iBook in both Sharing preferences and the Printer and Fax preferences, but no luck.
View 1 Replies
View Related
May 22, 2012
I can't get printer to setup on iMac with Leopard. It shows up on the add printer list in Print & Fax, but after clicking the +/- button and I see it in the list but the Add button is grayed out.
View 1 Replies
View Related
Sep 4, 2010
My present office printer is not supported with a Mac driver. It's one reason holding me back from purchasing a Macprobook. The salesman told me "too bad", got to change printer !
But below link appears to suggest Mac comes with in-built software for printer to read Mac. If not, is there any 3rd party software? Can someone advise or verify pse.[URL]
Mac OS X includes built-in software for many printers that allow it to recognize the printer when you connect it to your Mac, so you may not need to install printer software even if it was included with the printer. Connect the printer to your computer's USB port or FireWire port, if supported using the appropriate cable. Be sure to check the documentation that came with the printer and turn it on. If it doesn't seem to be recognized by the printer, for example, you can't print. You may need to download the latest drivers from the manufacturer's website and install.
View 5 Replies
View Related
Aug 19, 2009
Have macbook running OS X 10.5.7. Bought an Epson NX100 printer from Target for $30, it says Mac compatible, but my macbook won't recognize the printer. I tried installing the new printer but there is no "Epson NX" from the drop down menu.
Usually with new printers you can just plug it into the USB port, install new printer, and you're set.
View 3 Replies
View Related
Apr 18, 2012
I have an HP printer hardwired to my iMAC and have been sharing the printer, wirelessly through the home network, with an older Powerbook G4. I've added a third laptop (Mac Pro) which also shares the Wireless network, but can see the Printer online. I get a message that the Printer is not Online.
why the third laptop can't see the printer online?
View 1 Replies
View Related
Apr 2, 2009
Running OSX 10.4.11 Tried to add a profile for an old printer and now I can't access my printer setup to delete it. Every time I try to open it it shuts down and says that Printing Preferences has quit unexpectedly.
How do I wipe clean the printing prefs and start over.
View 2 Replies
View Related
Sep 19, 2009
I have a Desktop PC running XP and a Black macbook 2007 which runs off wireless router.
I am trying to find info on printer wirelessly but having a hard time figuring it out.
View 7 Replies
View Related
Mar 24, 2012
Anyone else having a problem with not getting the Printer Setup Utility to open? Double-click or right-click/open... neither opens it up.
Info:
Mac OS X (10.7.3)
View 1 Replies
View Related
