I've just got a new Brother HL-210w wireless printer, but the wireless setup has got me completely baffled. Has anybody set one of these up wirelessly? I'm following the directions in the book and using the CD, but I cannot get this printer to work.
View 3 RepliesAs anyone set up a brother 2170W printer to communicate with an iMac running 10.5.5. via Airport? Is this possible?
I have it running on USB now no probs (after a firmware update) however when I try to set it up for wireless I still get the 'printer offline' error.
I follow the Brother instructions and use a network cable etc and the mac finds the printer but when I disconnect I get the error.
When I first set up this new macbook pro the printer installed perfectly and worked great. Today I hit 'print' and nothing. No printer installed. I'm not a computer guru so I don't know what to do when set up asks for 'machine' ip addresses. What machine...printer or laptop?? Right now I'm very frustrated because it worked great and now, poof, it doesn't. I tried using the install dvd to reinstall the printer after clicking customize it still looked like it wanted to reinstall the whole operating system. Wasn't clear to me at all so I ended that before really screwing things up.
Here's how I'm set up: 13" MacBookPro unibody aluminum, SnowLeopard OSX6, Airport Extreme wireless router, Brother MFC490CW Wireless printer with my wife's intel iMac also connected to the printer via lan cable. I would seriously appreciate some suggestions that I can understand to get this what should be a simple configuration to work and stay put. I suspect it's a simple process but at this point I'm clueless.
I have a Mac mini (mid-2010), Brother MFC-9840CDW multi-function device (built-in wireless), Windows 7 (64-bit) running on Boot Camp, Windows 7 built-in firewall turned off, Westell router
Attempts:
Brother website, "Wireless Setup Wizard for Windows," dated 2007. I appropriately responded to the prompts, only to have the program end without making any noticeable changes.
Brother website, "Full Driver & Software Package." It could did not find my printer to install. It did see my neighbor's printer.
Called Brother. Factory reset of the printer, printer WAN setup WEP with password, printer setting WAN enabled. When wireless failed, we tried to connect the printer via ethernet cable to the router directly. Also pinged the IP address of the printer and input the IP address in the Brother install program instead of having Windows find it on its own.
Called Apple. The tech did not have a clue. Said she would pass me to a lead/supervisor, but no one ever picked up.
Windows could only see the printer if I connected the USB cable directly from the printer to the Mac mini. But I do not want to run it that way. That's why I got the CDW model ("W" for "wireless"). It worked wirelessly under XP on my old PC that the Mac replaced.
Just wondering, as the title suggests, whether the Brother HL-5370DW mono laser printer creates its own wireless access, or do I need a router?
View 1 Replies View RelatedI was trying to print a paper off my macbook today, and for some reason it wouldn't print. I ran a utility scan that showed that the printer was hooked up and receiving and sending signals, but I keep getting an error message saying that the Printer is offline! This happened right after the OS X 10.5.5 update.
View 13 Replies View RelatedI have a Desktop PC running XP and a Black macbook 2007 which runs off wireless router.
I am trying to find info on printer wirelessly but having a hard time figuring it out.
I have a mac laptop that works well on my verizon wireless router. I have a HP printer attached to the router. It works well with 2 windows wireless PC's. How do I set up the mac laptop to print on that printer?
View 1 Replies View RelatedI've been working on this for about 8 hours and I'm going nuts. I am using an Imac OS X version 10.5.8.I purchased a Canon MP560 today and can't figure out the problem. I don't even know where to start. I'm trying to connect the wireless printer using Airport. There is nothing listed when I click on 'Preferences- Print and Fax'.
I read the instructions that came with the printer several times, up to a point. I clicked 'wireless lan setup' on the printer. It's asking me for a lan access point and a wep key. I've used Google until I can't even think anymore. I read Airport is like a router, or can be used as a router. The blue light is on on the printer, and it says it's searching for a connection but can find one.
i connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...
View 1 Replies View Relateduninstall a Brother MFC 425N Printer from my PowerMac G5 OS Tiger 10.4.11.
View 1 Replies View RelatedI have a Brother HL-2270 DW printer setup on my network. I see it as an option to add, but when I select it, it says that the software is available through apple. So it makes me select "install and continue" or "cancel". If i select continue, it works on it and then says it is not able to find the software. So i manually went on to the brother website and downloaded the driver. WHen I go back to add the printer it still wants to go through the apple software databse, and as a result I cannot load the printer.
Info:
MacBook, Mac OS X (10.7.2)
My grandfather purchased a Brother MFC-J6510DW all in one printer several weeks ago and since day one we cannot get the thing installed and recognised on his mac.He running an Imac with OS X 10.7. Originally the computer recognised the printer but when we tried to print nothing would happen. We opened up the printer que and noticed that the job had a error but the system didnt tell me what error.I have visited the Brother website and followed the advice to uninstall all the printer drivers and associated docs and then reinstalled the drivers..... Now my grandfathers machine will not recognise my printer at all and when we try to manually search for the drivers (that we have installed) the mac does not load any for this specific printer.Is there anyone out there who can shine a light on our problem)?
View 2 Replies View RelatedI just purchased a Brother MFC-7860DW printer/copier/fax. I have a Macbook Air with OS X 10.6.8 and use a router....Wireless
The instructions tell me to download a driver (which one??) and insert the CD Rom......I do not have a CD Rom. Now what do I do?
Info:
MacBook Air
After I installed Snow Leopard everything has been working fine but I installed the latest Brother fax/printer driver and supporting apps yesterday Airport stopped working. So I restarted the computer but still won't turn on, no matter what I do. I'm not 100% sure if they are related but it's hard to believe they are not. I can remove all the Brother related stuff but I still need the printer driver.
Has anybody had this problem and can anybody suggest a solution?
So I'm deciding between getting an HP P1006 or Brother 2140. My concern with these printers is their durability. I have had a Brother HL-2040 for 1.5 yrs but it was an awful experience, I had problems with paper loading. But, several websites say that the Brother 2170W is great. So, I am tempted to buy the 2140 or 2170W but I am not sure if it will be durable. I want to know which one do you guys think is more durable for use with MacOSX Leopard: HP or Brother?
View 1 Replies View RelatedI'm trying decide between a Canon or Brother color laser multifunction printer. Quite honestly we don't do a lot of color printing, but I'm so tired of clogged inkjets (can you say Epson) that I'm trying to stay clear of them. A multifunction inkjet would seem appropriate for our situation, but I don't want to have clean printheads once a month. Even if we do get a mutlfunctional laser I still need a a small photoprinter for quick photos prints. My other option is a multifunctional inkjet and then a B&W laser printer. I'm down to Canon and Brother based on the fact both seem to work well with Macs and don't have the bloated software that comes with HP. I can't find any reviews on the Canon lasers since they are relatively new. The Brother machines seem to get good reviews, but quite a few complain about the color prints.
View 4 Replies View RelatedIs there a way to install/convert Brother laser printer to be an Airprinter?
Info:
MacBook Pro, iOS 5.1.1
Can't seem to find a way to get the wireless feature of this Brother HL-2170W Printer working. It prints fine using the USB cable. A bit frustrated that spent the extra $$ for wireless feature that I can't get to work.
View 9 Replies View RelatedI have a pre-Intel iMac G5, running OS 10.5.8. I have been using an HP LaserJet P3005, connected with a USB2 cable, with no problems. The fuser got "muddy" on the 3005 so I bought a new HP LaserJet P2035n. I've loaded and reloaded the printer software from the provided CD, downloaded the driver software from the HP support website, but the computer doesn't recognize the printer. Called HP support and everything they suggested came up empty; they told me to exchange the printer for a another new one, but I get the same results with it. I'm using the same USB cable I used with the 3005 -- it worked perfectly with that printer as recently as this morning. What's wrong with my iMac or setup?
View 5 Replies View RelatedI am trying to setup a firefighter's apple laptop into our linksys net at firestation. She got access fine when we did not have it secured but now we setup a wep key. All other members can get in by entering wep key when they choose the wireless router but when we input the wep key to apple laptop airport I think we get connection error. Key is definitely right. What changed in the apple setup other than the wep key, again when signal was unsecure laptop safari worked fine. The linksys is a B about 3 years old.
View 9 Replies View RelatedA Brother printer update has just appeared in my Software Update, to my surprise.
I actually thought Apple had stopped offering Software Update to third parties, as the only other one I can think of is the Stuffit update that appeared several years ago on fresh installs of OS X (not sure if it still does).
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View RelatedI got a new HP wireless printer, and the mac suggested setting it up with the USB first, and then disconnecting once it was configured. I did all that.The mac asked to choose a wireless network for the printer, I did. Then the set up CD asked me to add a printer to the qeue from system preferences from the menu- when I clicked my printer was already added. None the less I followed the direction, and then got the message "You already have a similar printer set up, would you like to add this too?" I clicked YES, and then continue.
When I clicked on continue, the set up cd (or mac) told me that I had NOT set up a printer from the Queue (sorry about spelling), even though I had. So when I clicked continue, it told me the printer was not recognized in the wireless network, and now I'm stuck with plugging it in the usb. Please I know this sounds confusing, but why is this happening and what do I do to get the mac to recognize my printer? Apparently its not.My wireless signal is fine, I checked.
My Brother HL-3040CN printer only has an ethernet connector for network printing (as well as a usb port). If I wish to print wirelessly is there an adaptor or a wireless hub that I can plug it into with the cable?
I'm asking this because I've read the iPad doesn't have any means of connecting it to a printer with a cable. I won't buy an iPad now but maybe next year.
EDIT: Would an Airport Express do the job?
I am new to using mac and just got a new HP printer to replace my old hp printer. If I understand correctly I click and drag my current HP printer file/icon to the trash and then search for additional files using applef to delete the rest. Is this right? Am I missing any other crucial steps? If the brand is the same do I need to remove the additional files?
Also and this may be a stupid question, but how do i make sure that my computer does not recognize the old printer for my wireless network when I set up my new one?
I'm trying to set up my old iBook G4 as a print 'server' for other Macs on my network. I'm having a problem getting the other computers on the network to SEE the shared printer from the iBook. They can see the iBook as a network computer, but can't seem to connect or even 'see' the usb printer. I've clicked 'Share Printers on the iBook in both Sharing preferences and the Printer and Fax preferences, but no luck.
View 1 Replies View RelatedI can't get printer to setup on iMac with Leopard. It shows up on the add printer list in Print & Fax, but after clicking the +/- button and I see it in the list but the Add button is grayed out.
View 1 Replies View RelatedRunning OSX 10.4.11 Tried to add a profile for an old printer and now I can't access my printer setup to delete it. Every time I try to open it it shuts down and says that Printing Preferences has quit unexpectedly.
How do I wipe clean the printing prefs and start over.
