I managed to connect to my win 7 pc, but it is requesting a password that is never accepted by mac os. It never accepted my win7 network password so i could not access files.
View 5 Replies
I have shared me external hard drive in the System Preferences, but when I try to copy something from my windows pc on it I can't copy. I can read all the files but just can't put stuff on it. It says I don't have the rights to that. I have found that when I try to let me external be read & write by everyone in the system preferences on my mac I can not change it.
View 7 Replies View RelatedI used the steps from the below link and My mac says Printer Communication Failure. What to do?[URL]
Info:
MacBook, Mac OS X (10.7.4)
I've set some share folders, from windows xp I can open the folders (even create files) and see the child folders but when I try to open them I get access denied.
I'm using snow leopard 10.6 on a mac mini, can anyone tell me what I need to do to fix this?
How do I do this?
View 3 Replies View RelatedJust setting up all my sweet new mac product. I am wanting to access my files that are shared on my pc remotely on my MacBook. Im just not sure what application to use to do so. Basically just want access to all my music and video.
View 7 Replies View Relatedvia ethernet?
Is that all it takes to transfer files from a PC to a mac?
NOTE: Having sharing options enabled on both machines.
Last night, I downloaded Parallels onto my computer and everything was fine. I then downloaded the Windows 7 files from the Microsoft Store and the download speed was excellent -- took about 30 minutes to download ~300 GB of files. After attempting to click on these files to open them, they wouldn't open, and I realized that I should have purchased through the Parallels online store.
Shortly after this, I realized that my Internet speed was very slow, maybe 2-3 KB/sec. I uninstalled Parallels and cleared the Windows files from the Downloads screen, but Internet was still slow. Installing Windows can wait for another time (and maybe I'll just use Boot Camp instead). For now, all I want is to get my fast Internet speed back.
Info:
MacBook Pro, Mac OS X (10.6.8)
I've followed the instructions on the Apple website in relation to adding a Windows shared printer to a Mac [URL] but I still can't get it to work.
When I send a test page to the printer it appears in the Windows print queue and shows 'spooling' as the status. The document never prints.
I really don't know where to go from here, I'm just totally stumped and I've been trying for weeks to get this to work. Has anyone got any ideas?
Just wonder if shared Printer which is connected to Mac Pro(Mavericks10.9.4) can use from Windows 7(Home Premium) PC.
Info:
Mac Pro, OS X Mavericks (10.9.4), Late 2009
So I'm stealing someones wireless internet with my macbook and have my itunes open. I turned off "share my library on my local network". However, I see their library on my itunes. Would they know that I am playing their music or even know that I'm using their internet?
View 2 Replies View RelatedI have two users on my mac and am having some issues with sharing files. I created a shared folder and gave the other user read/write permissions. When I log in as that user, the folder can be accessed, but some of the files in that folder cannot be accessed. These are all photos, and for the most part I'm dropping them into the shared folder from iPhoto.
I tried it again by using the Public folder with the same result. However, there isn't consistency with the actual files that don't have permission. In other words, the shared folder I created may have a file that does not have permission, but that same file does have permission when I dropped it in the Public folder. So it is totally random as to which files in the shared folder don't have permission to be accessed.
I also tried to simply drag the files to the other user. Same result.
I have a network consisting of three Macs and a PC running Windows XP. One of my printers (a Canon Pixma MP830) is USB-connected to one of the Macs with sharing turned on. Thus, I am able to print to this device from any of the Macs. How can I access this shared printer from the Windows device? I can't determine an IP address because the printer doesn't have one.
View 3 Replies View RelatedI have my printer connected to a PC with Windows 7. I have 3 PC's that can print to it over my wireless network. But for some reason I can't get the MBP to print. I have tried many methods and they have all failed.
View 2 Replies View RelatedWe have a broken networkport on our HP Laserjet P2015dn, and need it to print from 4 macs in the office. 3times osX 10.4.11 and 1time osX 10.6.4 (all except 1 non-intel; running windows XP via Parallels and connected on the general office network). I am currently sharing the printer via USB (broken networkport) connected via a Mac using 10.4.11. I can print from every Mac, obviously. However, I can't print or know how to set this up for use in Windows (parallels).
View 1 Replies View RelatedSo basically, I was given a decent windows machine for free, and I'm trying to convert it into a place where all our family's files can be accessed.
However, I'm having a real tough time trying to connect to the windows 7 computer. I've tried Go>Connect to Server and put in "smb://" then the IP address (192.168.1.105 in this case), and I get the error message saying I should check my IP address and contact my system's administrator.
Now, the part that baffles me the most is that in the finder left hand sidebar, I can see the homeserver and the other computer on the network. When I try to connect to either one of them, it takes a good 15 minutes then the computer gives up, even when I connect with the administrator username and password.
Is it a problem with my computer? I've got them all on the same workgroup (MSHOME) and are connected to the same router.
I have installed windows xp and windows vista in my mac by VMware fusion (v 2.0 (116369))I used to access my shared folder from xp by the shortcut on the desktop, but suddenly I can't anymore when I click on the Z: drive (\.host) it gives me this message:
Z:
efers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location.
and the weird thing is xp connected to the internet! if its connected to the internet thats mean there is a connection between mac and xp. However, everything is working fine in vista!
I did tried:
Restart windows
Restart Mac
Disconnect / Connect network adapter
Switched the adapter to NAT (which is the default) / Bridge / Host-only nothing happen any idea why is this happening or what am i missing?
have a new IMac (OSX 10.5.8 Leopard) - I am a very new Mac user.
When I first I set up my Mac it immediately recognized the shared folders from my Windows XP machine. I did NOT have to configure networks or anything like that. I plugged in my Mac - the folders appeared in view. No problem.
But yesterday, in trying to repair issues on the Windows machine requiring that I disconnect net connection temporarily, Mac then showed a "lost connection" / disconnection to the shared folder. And from then on, it now cannot see the shared folders, nor can it even successfully ping the Windows pc.
Here's the current status:
Windows machine is hard wired - it CAN ping Mac right now. Mac is (and always has been) on router. It can NOT ping windows.
These machines are about 2 feet away from each other on the same net connection.
Because I have never had to especially configure either machine to see the other- I was afraid to continue trying to negotiate new networks - when there may be some other problem and I am not informed enough about Macs to determine what it is.
What I am really trying to do is move a large amount of files over to use on the Mac - and I would rather have it direct on the network then start saving many gigs to a separate drive then manually installing them.
I'm having trouble printing to a printer shared by my Mac Pro running 10.6.8 from my MacBook Pro running 10.6.8 Printer sharing is turned on on my Mac pro, they are connected to the same network, the MacBook via Airport and the Mac Pro via ethernet. I can quite happily swap files between them. When I try to add a printer on the MacBook the Canon iP4300 simply doesn't show up under the list of available printers as I think it should do.
Info:
Mac Pro, Mac OS X (10.6.8)
I have a new MBP (running Lion) and an older MacBook (running Leopard). I'd like both to run Time Machine to a shared external hard drive which I think I've worked out. My question is whether or not TM will store duplicate versions of the same files (particularly photos, videos, etc.) on the external hard drive, thus using up the EHD capacity more quickly, or will one file be saved and just recognized as being on both computers by TM.
Info:
MacBook Pro (13-inch Late 2011)
I found my personal web page by going through utilities, but not sure how to get anything on it. I have created a file (website file in Lightroom 4) that I want to share via internet. How do I get it on my personal web site on my Mac and how do I share that file with other computer users. No one has answered the question yet at support. I am told I have to purchase a web hosting service but isn't there a way to share large files via internet with the Imac software installed on my computer? I don't want to purchase a domain!
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
Is it possible to print from Snow Leopard to a Windows 7 shared printer?
View 3 Replies View RelatedI need to install the Canon MP520 printer to my MBP. The printer is connected to another a PC running windows and is shared. I installed the OSX driver provided on the Canon page, I can see the printer in the network printers but when I am asked to choose the driver I can't see the correct model listed. On the other hand, if I simply connect the same printer via USB, to my MBP it is recognized directly. When I'm asked to provide the driver while adding the printer via the network, there is also the option to browse to the driver location. So my question is, where are the can I find the right driver on the OS?
View 3 Replies View RelatedHow do I print to a vista shared printer? I went into print/fax, click + to add printer, click windows button but shows nothing. not really sure where to go from here.
View 7 Replies View RelatedHow do I connect my windows shared printer to mac air os x lion .as soon i try to connect it asks me for password and id, which i never set up for the printer.
Info:
MacBook Air, Mac OS X (10.7.3)
I have a HP OfficeJet 5610 printer connected via USB to my Windows XP computer, this printer is shared over our wireless network, I know this because my old laptop running Windows Vista could print to it, the Windows XP computer just had to be turned on. How do I add this printer to my mac?
View 2 Replies View RelatedMy 3 year old MacBook's ComboDrive doesn't work and I was wondering if I could Install Snow Leopard via a shared SuperDrive from a MacBook Pr over Wi-Fi. Is it possible to copy the installer locally and then install Snow Leopard or would I have to get an External SuperDrive?
View 2 Replies View RelatedI am able to see my server shares when I connect my bacbook pro via cable, but when i connect via wifi the network shares are not visible. a windows laptop connecting over the same wifi router can see the server shares. Does OS x 10.6 use a different port that I need to open on my wireless router?
View 1 Replies View RelatedI'm running OS X Server 10.6.8 and I created a new group in Workgroup Manager and I'd like to share a group folder for that group. I created the share and when I go to set the path for the group folder, Workgroup Manager keeps sticking the actual name of the group onto the end of the folder name I'm using. I have an example below since I know it is probably hard to understand what I'm trying to describe. On the group shared tab in Workgroup Manager, it asks for a Path name. My group name is Test and the folder I want to appear on the dock for this group is called Help. For the Path name I enter Help, since that is the name of the folder I want to appear. When I save the changes and go back to look at the information I put in, the Path now says Help/Test and when I log in, I have a question mark on my dock instead of the Help folder. This used to work in 10.4 without any problems. Now 10.5 & 10.6 want to call the group shared folder whatever the name of the actual group is.
View 3 Replies View RelatedI recently upgraded my pc to vista. When i was using xp, my macbook (running leopard) picked up my shared folders on my home network just fine, and several other wireless networks... now despite having the shared folders in vista set up and the network configured... leopard is showing nothing....its as if there's no network there.
the internet runs fine (on the network) but it won't access my shared files.. so there are no network problems, its a software issue either with vista or leopard... what am i doing wrong?
