OS X Server V10.6 Snow Leopard :: Group Shared Folder Name?

May 16, 2012

I'm running OS X Server 10.6.8 and I created a new group in Workgroup Manager and I'd like to share a group folder for that group. I created the share and when I go to set the path for the group folder, Workgroup Manager keeps sticking the actual name of the group onto the end of the folder name I'm using. I have an example below since I know it is probably hard to understand what I'm trying to describe. On the group shared tab in Workgroup Manager, it asks for a Path name. My group name is Test and the folder I want to appear on the dock for this group is called Help. For the Path name I enter Help, since that is the name of the folder I want to appear. When I save the changes and go back to look at the information I put in, the Path now says Help/Test and when I log in, I have a question mark on my dock instead of the Help folder. This used to work in 10.4 without any problems. Now 10.5 & 10.6 want to call the group shared folder whatever the name of the actual group is.

View 3 Replies


ADVERTISEMENT

OS X Server V10.6 Snow Leopard :: ACL Group Permissions Not Propagating?

May 3, 2012

I have a group of designers that are connected to X Server running Snow Leopard. I have placed them in a group, "MarComm" I have granted everyone full read/write access. ( I can trust them all) I have tried to propagate these permissions..I saved the changes and restarted server. For some reason there are 2 sets of permissions.

1) full access (desired configuration)

2) "custom" access  

This "custom" access does erratic things..for ex: 

Allows the designer to pull off a job folder containing 12 items. He has permission to use 8 items, but not the remaining 4. 

Perhaps I need a step by step tutorial on how to create a proper "group" and to propagate permissions. I understand that the ACL should take precedence over the POSIX. I am not well-versed in using the terminal, but I am a careful person, and willing to try it. 

Info:
Xserve, Mac OS X (10.6.8)

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Can't Connect To Sites Folder Server

Jun 14, 2012

I've just enabled Web Shareing, I think for the first time, on an old Powerbook G4. From the links in the System Preferances panel, I was able to see the 'computer' web site, but not the 'personal' one. Taking the problem to be that described in [URL], I followed the instructions in [URL]

Rather than the 403 I was getting, I now just see 'Safari cant open the page [URL] because Safari cant connect to the server macintosh.lan.'running the apachectl configtest commend. I did that, and got the following:

/usr/sbin/apachectl: line 73: ulimit: open files: cannot modify limit: Invalid argument

Syntax error on line 1 of /private/etc/apache2/users/James.conf:

Invalid command 'James/Sites/"', perhaps misspelled or defined by a module not included in the server configuration 

how to get the sites folder running?

Info:
PowerBook, Mac OS X (10.5.8)

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Create Group From Message?

Mar 29, 2012

I'm using Mail 4.5 and have a group of people I'll need to email regularly, most of whom aren't in my Address Book.  Is there a simple way I can create a group with these contacts in it from their addresses on the last email I sent them?  I don't want to enter them all into my address book inidividually. 

View 1 Replies View Related

OS X V10.6 Snow Leopard :: How To Address Email To Group With ICloud

Mar 7, 2012

How do you address an email to a group with iCloud? I used to just type in the name of the group and all the addresses filled in. Since I've switched to iCloud it doesn't recognize the group name. If I select +, then the the group name I'm still asked to select individual recipients.

View 2 Replies View Related

OS X V10.6 Snow Leopard :: How To Delete Untitled Group From List Of Contacts

Feb 7, 2012

How can I delete Untitled Group" from my list of Contacts? I have about 7 of them.

Info:
iMac, Mac OS X (10.7.3)

View 1 Replies View Related

Mac OS X Lion Server :: Create A Group Calendar In ICal Server 3?

Jun 22, 2012

I have set up a Mac Mini server to address the calendaring needs of my company. I have also turned on the iCal service using the Server app in the Lion OS. While the shared calendaring functions for individual users of iCal are great, my company is in need of general office calendar for postings of things like vacation times, company holidays, special conferences, etc. Is there a way to configure the Mac Mini server to allow the setup of such a calendar?

Info:Mac mini, Mac OS X (10.7.4), This is a Mac Mini server

View 9 Replies View Related

OS X Server V10.6 Snow Leopard :: How To Setup Mac Mini Server As VPN Server

Apr 3, 2012

currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.

-Model identifier: Macmini 3.1

-Mac OS X Server version 10.6.8

I am not sure if this version supports VPN.

Info:
Mac mini

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Cannot See Shared Printer On MacBook

May 14, 2012

I'm having trouble printing to a printer shared by my Mac Pro running 10.6.8 from my MacBook Pro running 10.6.8 Printer sharing is turned on on my Mac pro, they are connected to the same network, the MacBook via Airport and the Mac Pro via ethernet. I can quite happily swap files between them. When I try to add a printer on the MacBook the Canon iP4300 simply doesn't show up under the list of available printers as I think it should do.

Info:
Mac Pro, Mac OS X (10.6.8)

View 1 Replies View Related

OS X :: Install Snow Leopard On Shared Disc Drive?

Sep 3, 2009

My 3 year old MacBook's ComboDrive doesn't work and I was wondering if I could Install Snow Leopard via a shared SuperDrive from a MacBook Pr over Wi-Fi. Is it possible to copy the installer locally and then install Snow Leopard or would I have to get an External SuperDrive?

View 2 Replies View Related

OS X V10.6 Snow Leopard :: What Port Does Finder Use To Connect To Shared

Apr 8, 2012

I am able to see my server shares when I connect my bacbook pro via cable, but when i connect via wifi the network shares are not visible.  a windows laptop connecting over the same wifi router can see the server shares.  Does OS x 10.6 use a different port that I need to open on my wireless router?

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Manually Add A Windows Shared Printer?

Jul 5, 2012

I used the steps from the below link and My mac says Printer Communication Failure. What to do?[URL]

Info:
MacBook, Mac OS X (10.7.4)

View 3 Replies View Related

OS X Server V10.6 Snow Leopard :: Push Login Script From Server To User Workstations?

Mar 22, 2012

i have a domain controller and active directory based policy win 2003, one xserve running mac os x server 10.6.8 and alot of macs workstations. How can i push login script on all macs without adding it in login items? The script i want to store on smb or afp share disk, and will be edited from time to time. I've tried to add it on xserve from WGM, but it threw an error that current directory schema doesn't store desktop settings.So how can i solve this?

View 2 Replies View Related

OS X Server V10.6 Snow Leopard :: ICal Server: Free/Busy And/or Availability Not Working?

Jun 14, 2012

I run 10.6.8 server in a VM with Parallels Server for Mac. Lithium pinged me early Monday morning to tell me that my calendar server wasn't reachable. I found it had kernel panicked. After resetting it and verifying the directory structure and permissions, it booted fine. But availability or free/busy wasn't working for all users! The events were all there. Invites could be sent and received but when a user checks for availability when creating events. they see the daily work hours grayed out but not anything corresponding to a scheduling conflict.  

Things I have Tried:

- bounced ical server

- Rebooted the server

- checked the owners and permissions for the data store hierarchy. (_calendar:_calendar 750)

- checked for xattrs on .ics files in several calendars

- deleted .db.sqlite for several users in several dir in their calendar stores

- in the past I have found that some iTIP invitations seem to get "stuck' causing problems with an individual users free/busy and deleting the inbox resolves this so I deleted several inboxes

-I moved a copy of the data store to a test server and pointed several clients at it. 

The issue persisted in all of these cases without any change in behavior with one exception; somewhere (i lost track of where) during this process users also lost their delegation preferences. I'd love to find out how and where that is stored so that it can be restored in the future. It seems pretty fragile... 

I found one way to restore the functionality; copying a users __uid__/<GUID>/calendar out. . Moving all the folders under <GUID> out of the way and dropping the .ics files into ical with their account configured in that instance. Although this worked for selected users, I have many, many users and calendars so this solution would be suboptimal.  

Info:
Xserve, Mac OS X (10.6.8)

View 1 Replies View Related

OS X Server V10.6 Snow Leopard :: Server-admin Lost Config After Restart?

Apr 6, 2012

my problem is that on a restart of one of my 10.6.8 Servers parts of the Serveradmin configs are gone while some of them persists. The lost configs are everytime the same: VPN (complete) and iChat (a secondary but very important Host-Domain). Of course a can restore them from a backup but that shouldn't the standard procedure after a restart.... 

View 11 Replies View Related

OS X Server V10.6 Snow Leopard :: Server Loses Active Directory Binding?

May 15, 2012

I am running an open directory/active directory network.  Authentication is from the Windows server 2003 active directory.  It has worked fine until the last month. Now clients stop authenticating & when I  check the AD plugin it says network accounts are not available.  I can force the server to unbind, then renew the binding & everything works great.Is there any work around or fix for this other than upgrading the windows server to 2008? 

Info:
OS X server, Mac OS X (10.6.8)

View 2 Replies View Related

OS X Server V10.6 Snow Leopard :: Software Update Server Not Working After Change Location Files

Mar 14, 2012

I had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging)sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.

View 1 Replies View Related

OS X Server V10.6 Snow Leopard :: Software Update Server / No Original For Index.sucatalog Alias?

Jun 28, 2012

Trying to set up the Software Update Server under 10.6.8 Server. Have everything set up properly as per Apple's documentation, but all clients error out on software updates (saying they can't find the index. sucatalog file). When you view this file, which is an alias, within the HTML folder that is created when you enable the Software Update service in Server Admin, the alias doesn't link to an original.I've tried this on two separate 10.6.8 Server installations and I get the same error on both machines.Where is the alias "index.sucatalog" supposed to point to?Software Update Error Log in Server Admin says "Symbolic link not allowed or link target not accessible" and points to the alias file.

Info:
Mac mini, Mac OS X (10.7), Xserves (Early 2009, Early 2008, G5), Mac Pro

View 1 Replies View Related

OS X Server V10.6 Snow Leopard :: Replacing A Hard Drive Of RAID 5 System Just Ruined OS X 10.6.8 Server?

Jul 2, 2012

My system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4... 

1. I shut down the system

2. replaced the corrupted drive with the new hard drive

3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files... 

4. So I put back the degraded drive...

5. The machine still won't start...

6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic...  

7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).

8. booting via 10.6.2 server installation DVD still gives me kernel panic...  

Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?

Info:
Mac Pro, Mac OS X (10.6.8)

View 4 Replies View Related

OS :: Inside Mac OS X Snow Leopard Server Apple's Server Strategy?

Oct 14, 2009

Years before Mac OS X 10.0 was first released in 2001, Apple launched Mac OS X Server, targeting its newly acquired Unix-based operating system technology at the education and workgroup server market. Apple has struggled ever since to find a broad server strategy that works. The solution may be as obvious as the iPhone App Store. Mac OS X Server has remained firmly stuck in the background even as Mac OS X has blossomed. Over the last decade of Mac OS X's development, Apple transformed its legacy Mac operating system from an outdated relic stuck in maintenance mode throughout most of the 90s into a highly regarded system that gets as much or more respect from industry critics as any other desktop operating system.Apple accomplished something that many others in the industry failed to do: marry the power and familiarity of Unix with accessible ease of use in a commercially successful product. Ray Noorda tried to do this at Novell in the early 90s; Caldera's OpenLinux also failed to take over the task from Novell ten years ago. United Linux and a series of followup attempts to standardize Linux all failed to accomplish their aims. A variety of efforts to sell Linux to consumers since then have all made very little progress outside of a small niche of hobbyist users.

View 39 Replies View Related

OS X Server V10.6 Snow Leopard :: Delete Server Portion From My Mac Mini?

Mar 10, 2012

I don't use any of it and would like to update to lion with out the server portion.

Info:Mac mini Server (Mid 2010), Mac OS X (10.6.8)

View 2 Replies View Related

OS X Server V10.6 Snow Leopard :: Software Update 10.6.8 Server Crash?

Mar 23, 2012

Up until a recent update, software update was working. Now it just crashes. I've tried deleting the Pref's and downloading updates directly, but that hasn't helped.

Info:
Xserve, Mac OS X (10.6.8)

View 3 Replies View Related

OS X Server V10.6 Snow Leopard :: Install A SSL Certificate On A Mailserver Under 10.6 Server?

Apr 18, 2012

I'm trying to install a SSL Certificate on a mailserver under 10.6 server. I dont know what to do by intermediate certificate and choosing type on certificate assistant.

View 3 Replies View Related

OS X Server V10.6 Snow Leopard :: Update Mysql For Server 10.6.8 Safely?

May 19, 2012

Server version is: 5.0.8 Current available seems to be : 5.5.24 community server available from h [URL]if I already have several databases running under 5.0.8 what are the hazards with upgrading to 5.5.24 community server?

Info:
Mac mini, Mac OS X (10.6.8)

View 1 Replies View Related

App Store :: Lion Server Upgrade For Snow Leopard Server

May 27, 2012

I can't seem to get the App Store to sell me Lion Server for my Snow Leopard Server.I'm trying to remain positive about this but I'm getting really that money isn't enough to make this happen.My experiencewith the App Store and Apple policies in general is its almost time to dump OS X and head back to Open Source.I put money in my iTunes account.I've done the 15 logins it takes to satisfy AppleID my account is complete and up-to-date in the store and the Support Communities.How do I buy the software and actually download and install it?

Info:
Mac mini, Mac OS X (10.6.8), upgrade to Lion

View 5 Replies View Related

OS X Server V10.6 Snow Leopard :: Mail Server Hijacked For Spam?

Jun 16, 2012

I only have macs in my network and am not aware of any mac viruses. Afer I had the chance to review everything it became clear the e-mail server was sending out e-mails. SMTP logs for my mail server showed numerous attempts between yesterday and today to send out e-mails. Considering my mail server has not yet been launched and is not being used to either send or receive e-mail I imagine the work must have been done by a hacker ro sometoner else who hijacked my mail server to send out spam e-mail to others. 

How can I prevent this from happening again the in future? Is there a security setting that would prevent this? My firewall had a relatively long and safe password but I changed it today just in case. Also, I changed the password for both the firewall and server. Will this help or is it possible for a hacker to connect and gain control of mail mail server without the need to know these passwords? If not in OS X Server, is there a third party application that would protect the mail server from this in the future? 

View 6 Replies View Related

OS X Server V10.6 Snow Leopard :: Windows 7 Connecting To 10.6.8 Server

Feb 14, 2012

I have a Snow leopard server with a folder shared Via SMB for the 2 PC's we have, all the macs can read and write to this folder OK. About once a week the 2 pc's take 10 mins to start and then cannot connect to the share.  Web/email and sharing betwen them still works.  I can ping the server from both.  I've turned off the smb and restarted it. Also tried restarting the Xserve. This still has no effect. All internal firewalls are off. I've tried guest access.

Info:
Xserve, Mac OS X (10.6.8)

View 2 Replies View Related

OS X Server V10.6 Snow Leopard :: Server Admin Cannot Connect

Mar 20, 2012

I'm trying to using Server admin on a remote Mac to manage our xserve. Both are running 10.6.8 and I've installed the Server Admin tools onto the mac. Both the Workgroup manager and Server Monitor work OK on the mac, but whenever I try and connect the Server Admin it always comes up with the error : "The login information is incomplete for this server or is not valid. The server failed to accept the login information you provided for <servername>. Check the name and password and try to log on again" I can't connect using the server name, FQDN, or IP address. The macs are all using OD and AD and I've tried both AD and local OD accounts (all administrative) but to no avail. DNS is working OK and I can resolve the server-name with dig and dig -x. I can screen share the server so connectivity isn't the problem. 

View 8 Replies View Related

OS X Server V10.6 Snow Leopard :: New Setup Of Mail Server?

Apr 24, 2012

I've googled and searched, I can't see what I'm missing, so I am turning to the community for help, because I simply don't get this. I own 2 domain names.  I'd like to use the build in Mail Server application into SL Server, so if your suggestion is using another mail server, please don't post that. 

Let's say my domain's are domain1.com and domain2.com I've looked at the Mail Server Admin user guide, and I've followed a couple of wizzards, and... all in all, I am getting no where.  Let's also say my email client is my iPhone. 

Ok, so domain1.com currently has no email with my current provider, and domain2.com currently has email from my current provider, it's my desire to eventually switch this, but experimenting on domain1.com will do no harm, so I am experimenting on this.  Both domains give me the ability to point to an mx address. 

Here's what I've done.  I've got my user created in Workgroup Administrator, and I am confiuguring my LDAP3v, and I am authenticated enough to create and delete users. 

***I Should note that DNS is currently disabled, I gathered from all my reading that I don't need the DNS enabled because I manually put in the MX record to mail.domain1.com and domain1.com is correctly identified.  The server is also the webserver, and all the web server functions are working as expected!  I don't know if not having the DNS enabled is holding me back or not *** 

1st, I enabled the mail service in the Server Admin.  My domain name is ServerName.local and my host name is mail.domain1.com (I created an a entry in my dns settings for that).  Enable SMTP is set, IMAP and POP are enabled as well.

I don't intend on setting a relay, because I want this server to do send email out.  I do have some cases where I send a mass email out, not for spam but for Christmas card purposes, and I think this is a good free way to not have to limit myself to batches of 50 or so.

I have my created SSL certificate, and havce only the Kerberos and CRAM-MD5 settings set in the security.

In my hosting section, I have enabled Virtual hosting, and listed my domain1.com and domain2.com below.

Now in workgroup manager, I've connected to my LDAP3v database and created a test user, and a test group.  In the server admin, I added the test group to the list of authenticated mail users.  I made my test user a member of the test group, and made that his default group.  I enabled the mail service, and set the mail server which is ServerName.local, and enabled POP and IMAP. 

That's it.  I've done nothing in terminal, just that.  I was getting a user unable to authenticate error, it was able to download the certificate though.  Then I realzed I had an MXE defined in my settings for my DNS domain manager.  So I changed to an MX, to mail.domain1.com and then I created mail.domain1.com pointing to the same IP address as domain1.com, and unfortunately the DNS records haven't updated yet, because I initially didn't create the mail.domain1.com entry, and now it's saying the server isn't responding, so I am anxiously awaiting an update from the DNS in the world to see if the issue has now cleared up. 

Info:
Mac mini Server (Mid 2010), Mac OS X (10.6.8)

View 5 Replies View Related

OS X Server V10.6 Snow Leopard :: 10.6 And 10.7 Clients Don't See Update's From 10.6.8 Server SUS

May 16, 2012

I just configured my Snow Leopard Server to distribute Lion update's [URL]I also see that the sync is competed with all latets Lion update's and all are enabled. I've adjust all the settings on the clients:sudo defaults write /Library/Preferences com.apple.SoftwareUpdate CatalogURL [URL]The problem is that all my 10.6 and 10.7 clients doesnt see any availble update's and running the Software Update on the cllient i get the message "The software is up-to-date" I checked all the configs.....reset the complete SUS server and started all over but still the same issue!

Info:
Mac OS X (10.7.3)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved