I installed a new hard drive on my MBP the other day and used migration assistant to transfer from my old drive. Spotlight started indexing and eventually finished, at least I thought it had since I could access the spotlight menu.
For the past two days, however, mds and mdsworker have been hogging my CPU, often taking as much as 90% as shown in the activity monitor. Does this mean that spotlight is still indexing or are these processes somehow stuck? and if they're stuck, how can I fix that? I've rebooted, reset the pram, reset permissions, reset spotlight and even re-imported my files and it just continues and the fan is on a lot despite no activity.
I just opened the console but couldn't find anything related to mds.
My G4 Powerbook (powerpc) has been hiccuping lately.
Basically, i'll be surfing or typing an email and every gesture takes 2-3 secs to complete. Even simple things like switching tabs or highlighting a few words are delayed.
I'm no expert but i opened Activity Monitor to take a look and noticed Firefox running between 60 - 85%... and this is with it just sitting there. I attached a screen shot of this so you can see it.
It seems to me that Firefox is causing this. But what can i do so it doesnt hog the system?
BTW - I have OS X 10.4.11 Firefox just upgraded itself to 3.0.7 and only had that plus Safari and Activity Monitor running.
I did a standard install of Snow Leopard (SL) and everything seemed fine for a while... but I noticed a lot of beachball time, and the computer became more and more unresponsive. I found then that Mail was hanging on me... immediately after start-up it seemed to work fine, but after about three minutes of working I could no longer compose emails, and the panels displaying inbox, or whatever, contents would not display their contents... even though I knew they were not empty! I also tried to quit Mail to refresh it, but found that it was not possible... I had to resort to force-quit Mail. Moreover, if I wanted to shut down Mail would not quit and i had to force quit before I tried to shutdowN... every time! After a few abortive sessions I stopped Mail being a log-in item and found that everything ran fast and smooth UNTIL I loaded Mail... after which the whole of the above scenario would repeat... I then decided to look in Activity Monitor and found that Mail was listing between 90% and 120%+CPU usage!!... even when it was in the background and not being overtly used. When I did manage to quit it, after it had left the desktop and switcher, it was still listing 20% or so CPU usage.
I decided to try a different client, and loaded Thunderbird. Runs great... and so does Snow Leopard all the way round now!! But I don't really want to go over to Thunderbird... I would rather stick to the integration level possible with Mail. I hope that some form of patch will be found to correct this behaviour. (By the way, I have always had some problems with Mail cancelling shutdown even before SL came onto the scene!)
I've been having a few issues with "Adobe AIR Application installer" hogging my CPU all the time.
I was wondering if anyone could give an insight in to what it's doing, why it's doing it and how to stop it regularly occurring. I keep noticing it using iStat Menus, and quitting the process but it keeps coming around!
Everything is running very, very slowly. In the Terminal, top shows me that process 15, DirectoryService, is using between 45 and 248%(!) of my cpu, and hdiutil is also using much more than I expect. What is causing this, and, more importantly, how can I make it stop. It is making my computer unusable.
It doesn't seem to matter what applications are running or if I have Web Sharing on or off. I suspected it was the flood of attempted logins from having Web Sharing on, but turning it off doesn't make any difference.
System Profile Mac OS X 10.6.5 Model Name:MacBook Model Identifier:MacBook3,1 Processor Name:Intel Core 2 Duo Processor Speed:2.2 GHz Number Of Processors:1 Total Number Of Cores:2 L2 Cache:4 MB Memory:4 GB 667 MHz DDR2 SDRAM Bus Speed:800 MHz Boot ROM Version:MB31.008E.B02 SMC Version (system):1.24f3
I bought a brand new 15" i7 MBP two weeks ago. Today I noticed Finder taking up 375 MB of RAM, somewhat significantly more than anything else running. As of now I still just have the stock 4 GB ram in the machine, and less than 100 MB are free.
I'm not noticing any huge slowdowns so I'm not totally worried about it, I was just surprised to see Finder using so much memory. Is this normal? Is there an easy way to restart Finder?
For the last week, my Mac has been running very slow. Even when I don't have any apps open, it still lags. I opened up Activity Monitor to see what is going on. I see that a root process "AgentDaemon" is taking up almost all my CPU and RAM.
When I try to quit (or force quit) this process in the Activity Monitor, it will go away for a second and then come right back.
Does anyone know what purpose the "AgentDaemon" serves? And why is it hogging all my CPU and RAM?
Every now and then my 2008 Santa Rosa MacBook w/ 10.5.2 will have it's fan run very fast while nothing is being done. No apps open. No internet traffic. Sometimes it even happens at the login window.
I've run Activity Monitor when this is occurring and found a process called "applet" that runs the CPU at 94%. Quitting this applet results in the CPU activity to drop to a mere 3% - 4% and after about 30 seconds, the fan starts to slow and gradually turns off. Nothing bad happens to the computer after quitting the "applet" process. I have no Microsoft applications on my computer.
I have a new mac mini, 1gig ram, 2ghz processor, and finder is consistently using 65+ percent of cpu percentage, i checked my buddies computer and his finder uses 1%. Also my computer crawls and i assume this is the reason.
I'm sure that you have come across this problem before. It seems that a lot of users suffer the same problem, but I cannot see any answers that solve it.
I am running Mac OS 10.4.11 and the kernel suddenly hogs between 40 to over 100% of the CPU. I reboot many times to try to clear it, I have run applejack 2 and 3 times in succession, but nothing clears it. I did an 'archive and install' last week which cleared it for a few days, but now it's happening again. Do you have any ideas?
As you can see in the attachment, the apps I'm running aren't that big of a deal for the most part. This is a 2007 version 8-core Mac Pro, 8 GB RAM. I'm curious what happens to make the apps open bog down the computer like this? Just leaving everything running for days at a time?
Lately Safari has been hogging HUGE amounts of RAM after a while. After logging in on just this site to post this it has risen to 150MB! if I have several tabs open (2-4) it rises to about 600MB. This slows my system considerably as I only have 2GB total. Anyone have any ideas on how to fix this?
When I launch Mail app, my mac starts running ridiculously slow. I get the spinning ball after almost every click.Just switching between safari tabs can take 1/2 minutes. In activity monitor it is showing 118% is being used by mail when it is running which hogs the entire CPU effectively.When I quit the application through activity monitor it quits, however if I try to quit (CMD Q) or force quit the application nothing happens. Also when I try and shut mail stops the shut down.Â
I have had my Macbook Air since late 2010 (it's a mid 2010 model). Since a few months ago, I have been having an issue where Kernel_task will randomly kick in and use almost all of the CPU power, making the system pretty much unusable. This is especially bad right on startup and sometimes stops after a while, but can randomly kick in again. When the issue started, the system was running Mountain Lion. This issue has persisted even after I wiped my hard drive and put a fresh install of Mountain Lion on my MBA (and then upgraded immediately to Mavericks).
Can certain Firefox themes use more battery power than others, thus causing battery life to short out sooner than it should? I'm using Metal Ice right now and I notice that my battery life isn't quite as long as it is with other themes.
recently safari started taking up more & more ram. i have a standard setup 4gb ram on 2011 macbook pro / lion os x and i am left with 5-10mb ram when opening safari = crippled system entirely. no extensions, using top sites tho. no idead how it came about, hate using ff on mac?
is there a way to keep the menu bar open always, without altering system codes or erasing system folders? when anything is in full screen, it disappears and I want to see the clock.
I am a proud owner of a MAC powerbook G4 for just over 3 years now. It runs MAc OX 10.3. For the last two weeks i have been having issues. First it started to be very slow. Then it would not boot up and i got a blue screen. I ran the file system checks from the OS X and it complained about the volume being bad and said it could not be repaired. i decided to reinstall the whole thing and did a complete erase and install. IT booted up fine. The software updater asked permission to update which i agreed.
After the update was over, the software updater had more updates. I guessed that it was probably giving me updates in the chronological order. During a particular update, it gave the blue screen and "please restart" ... and when i rebooted it did not come up... just a blue screen... i verified the filesystem using the diagnostic tool and it again said it was corrupt .... I have done this twice now and i have a feeling it happened when i was updating the same batch of software updates.... sometimes my software updater would crash everytime i launch it.....
I was asked to performed a system update with a reboot which I proceeded to do. Once the reboot was complete I had lost my system time (which had been reset to December 31, 2000 and my background had been replaced with the original generic MAC background. I have been unable to find the source of this issue and I am unsure how to fix this. I was able to change my clock by adjusting the Date & Time Preferences and fix my background image as well, but I am concerned that this is a temporary fix. Has anyone else experienced this with a system update?
could not be sure whether the Admin user - password reset with the CD would be the solution to my question as suggested in previous threads I searched - and have no idea where my start up install CD is
So my question-
I was trying to put parental control to ask for password when my computer starts up. I did something I guess and messed up the info.
I can log in with my own account when I restart my apple - which says now it is a standard account (must have messed that up)- but can not make any changes on system preferences or anything else that requires login and password. It requires Admin info. My own login that I use now used to be my admin so do not have any other info set.
now on system pref - accounts - an account titled "test" seems to be admin but can not even access that and reverse myself to be the admin since I can not unlock system pref. Or cant click on "Login Options" for the same reason.
There are no other users on this computer than me.
I have an extensive collection of fonts (60,0000+). Several hundred of them will crash my system when I open one of them in Finder (double-click the suitcase). I picked one at random for some serious examination. I looked at my sample with many font tools. My latest tool was FontDoctor (v5 and v7). FontDoctor reported "no problems found" with my font. Yet the crash persists. Any tool that can do a thorough job of investigating and repairing my corrupt fonts.
I recently took the plunge and installed Lion after being content with Snow Leopard....well now I have quite a few issues. When I open system preferences for some reason it automatically opens to Network...why I'm not sure. When I click show all, then click sharing, I can't make any changes in the Sharing preferences without my entire system locking up. I can't force quit or anything. I can still use the mouse but all I have is the rainbow wheel!
I have searched and searched and haven't been able to fix it. I have tried booting into the Guest account and the same problem happens there. I have trashed all the plist files everyone says to try. I have tried repairing permissions etc. I feel like I have tried everything. Is there anything else that I can do without have to do a clean re-install. I'm hearing if I do this that I won't be able to migrate my files from by backups due to permission problems?
I also took a look at my system log and it is full of this! Jul 3 22:24:26 jessica-imac com.apple.launchd[1] (com.apple.Kerberos.digest-service[1307]): Exited with code: 1 Jul 3 22:24:26 jessica-imac com.apple.launchd[1] (com.apple.Kerberos.digest-service): Throttling respawn: Will start in 10 seconds .....
I have a g5 with sys 10.5.8 , that I just bought and old mac documents from 10 years ago.
For some reason it will not read them. How does one get old documents translated into something usable.
Secondly, the old system software and applications no longer seem to work with the new machine, is there a way to use those. The mac was always great about being able to use several system folders and their applications.
My hard drive crashed and now I need to reinstalled everything but I'd like to know what would be the latest system version? I have two mac book pro I want to upgrade: the one that crashed is a 12" from 2004 I believe. and a 17" from 2006, this one runs on Mac OSX 10.4.11 which I believe is the latest I can use on this one.
Recently viewed this Apple web page. In Addition to my G5, I have a G3 running 9.2.2. Is there any point in moving later versions of the named files listed in the Apple web page into the System Folder of the G3, or is that just asking for trouble? Improved performance of 9.2.2, or disaster?
Info: PowerMac Dual 2.7 GHz G5, Mac OS X (10.4.11), Desktop G3 (1997) upgraded CPU, RAM, Hard Disks
How do I install MAC OSX on an iMac that does not have any system installed on it? How to insert the install DVD ( after turning it on)? I have iMac G4
I've been reading this site for a while now, first time I'm posting. I recently purchased 8 GB of RAM for my 2010 13" MBP. There are two 4 GB DDR3 PC3-10500 1333mhz sticks. When I install them in the laptop my computer does not get past the apple logo boot screen (the spinning disc freezes). However, I can boot into Windows (boot camp) without issues.
Also, when I pair either of the 4 GB sticks with one of my old 2 GB stock sticks the laptop boots up fine in OS X. The system profiler registers it as 6 GB of 1067 mhz RAM (the stock sticks are 1067 mhz)
