I am trying to install a web cam and i am not sure how to do it. When i plug in the usb i do see it listed as a usb device but it will not work with skype etc. I have tried this on my macbook pro and a macbook G4. Do i need to install a driver for it perhaps? if so how would i do this?
View 8 Repliesi am new to this forum. i am just wondering that if i can install Leapord on G4/500 single proc and if i can is there any procedure i ahve to follow.
View 7 Replies View RelatedI'm continually upgrading my drives to larger drives. While in the time being that is fine, but my disk space usage is also increasing. Rather than replacing my 2TB drives in a year for 4TB drives (or whatever size they may be), I'd love to add more drives.
Right now I have my 'backup' drives in an 8-bay SansDigital eSATA cage. This is fine for backups, but for simplicity and drive speed sake, I'd love to just add more drives to my machine. I'm using up all 5 available SATA ports on my 2010 MP. I don't use the Optical drive much, so got to thinking: what about putting my optical drive into an external firewire/USB housing and plug it in when I need to use it. This would free up one extra drive port, which would suffice for the next 2 years or so.
So, are they are good external casing's that will allow me to use my current MP SATA optical drive? Is this method bootable, what pitfalls might I run into?
A couple of years ago I purchased an iMac c2d 24" BTO with upgraded Graphics (7600 256mb), 2 GB of memory and a 500 GB hard drive. This has failed three times and Apple have decided to replace it with a new iMac 24 2.93GHz, NVIDIA GeForce GT 120 256MB memory etc .
I have to send my old unit back first then they will send out the new machine.
My question is how do I follow the machine trail? I have yet to receive a call to arrange pick up of my old machine and I've checked on Apples web site under my account and can see nothing about the new machine.
Can any one who as been down this road especially in the UK enlighten me as to what happens and how to view things.
I need to replace the power supply in my Mac Pro (2008) but I'm stuck at getting the small cover off. I've removed the metal plate that was under the optical drives (POV when looking through the side).
But it seems there's a small cover for the power supply that's similar to the big processor cover for the liquid cooled G5 towers. I can't figure out how to remove that.
Does anyone have a link to a manual or take-apart guide for the Mac Pro?
So it looks like I'm going to have to reinstall Mac OSX on my IBook but before I do I would like to back up the majority of the files and applications I have installed over the years.. Is it possible to do this if the .dmg and .iso files, etc. are long gone? If it is what's the best solution?
View 1 Replies View RelatedHow do I put a large quantity of emails into the trash all at once? I need to get rid of emails in my inbox and also in my
View 1 Replies View RelatedIn the apple store they told me that i had do something to my mac to keep it clean and free from bad stuff at least once a week. This was not a program they had installed but it was already on the mac. I have a mac book pro 13'.
View 3 Replies View RelatedI am looking to try using the injector method with an XFX 4890. can someone detail the exact steps and files for doing this on snow Leopard?
I see the full 4890 thread but do not see it tailored to SL... It seems all over the place now...
There is a commercial version of the entire downloaded offline Wikipedia for mobile phone OS's called WikiPock available preloaded on an 8Gb Micro SD card
However, I realize Wikipedia is always available in a current version for download. What I'm looking for is a procedure to download it in a readable format onto an SD card myself. I would prefer to have it cross-platform so it could be read on either Win XP or OSX.
Does anyone know of an application to do this or a link to a detailed written procedure?
My hard drive is nearly full so I have been trying to empty trash. Every time I try it starts to empty then abandons the procedure.
Info:
MacBook Pro, Mac OS X (10.7.4)
After hours of research, I'm finally making a thread about this. It's very simpleI know you can sync Google Calendars(GC) with iCal, so anything you change on your GC will sync to iCal, but I need a way to do the opposite. iCal››Google Calendar.
I know there is a $60 service that does this, but there must be a free way! I've had no luck searching Google for answers... Why I want to sync with GC is because I want my family to be able to see my calendars, but I don't like using GC, I much rather enjoy using iCal. Much nicer user interface; unlike Google which is very bland. (As is Google's way) Anyone able to help me out?
My 500GB external hard drive (Hitachi DeskStar) crashed! The blue light comes on, and I can hear the hard drive spinning, then sounds like it's stuck, or clicking ...
Same thing happens to the internal HD on my iBook G4. Sometimes the internal HD works, sometimes not.
I desparately need to find someway to attempt to either fix the external 500GB HD, or recover the files. The 500GB was my main HD, and I have so much very important data that I need to recover (no backups!).
I have years of research (lots of family history), thousands of pictures (many very old), my personal journals that I've been keeping for years, personal information, letters, documents, family videos, and all of my e-mail.
Somebody was telling me that there is special software that will recognize the HD, and allow you to recover the files.
What would you recommend? At the present I have no money to do anything, but will save up for the recovery software. My uncle is getting me a new hard drive, so I'll have that to back up the files when I have the recovery software ...
Can't remember system password and can't get procedure to reset to word using Apple ID and password. The screens I get do not match the instructions.
Info:
iMac, OS X Mavericks (10.9.4)
I have an iMac that is rapidly filling up. I would like to move my iTunes and iPhoto library to my external harddrive (I currently use for Time Machine). Is this possible or even adviseable? If I were to do this, what would I need to do. Is it as simple as moving the folders that hold these files on to the external. Would the programs find them.
View 5 Replies View RelatedOn my new MBP I fired and set-up the system, and SL was already installed.
I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
Id just like to clarify that I can set the default os to boot up in windows and in mac, why both?
Thats not my question, my question is when i restart windows it will boot up mac os since thats the default, is this correct?
Theres no sort of temp file or setup so it only restarts windows?
(this mouse wheel is so annoying when it stops working all the time!)
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
I've been trying to install and use BootCamp from Apple, so I can use Visual Basic for my classes. Obviously, I need Windows for this. Anyway, i downloaded BootCamp, installed it, and then Windows XP. After this I was told to insert my OSX disc to get the drivers. Well nothing happened at all. I suppose because this install of Leopard didn't include BC, it was a seperate download.I then read that BC Assistant should give me the option to burn a drivers disc. I looked at the provided screenshots, and right where the button should have been, there was nothing.
View 6 Replies View RelatedMy MBP was recently squished in a motorcycle accident and its hard drive and superdrive were destroyed. Is it possible to buy a new hard drive, put it in an external USB 2.0 enclosure, then install OS X on it using the discs that came with my destroyed MBP in a different Mac, then put the hard drive into the squished computer and have it use that hard drive as its startup disk? The motherboard on the squished computer is fine, I just can't install OS X on it because it has a broken superdrive.
View 4 Replies View RelatedI searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.Now I suppose this should have been moved or deleted as part of the install process. Can I move them to a file where they belong?
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies View RelatedI am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code:
Requires Samba to perform SMB lookup features.
Requires the following perl modules:
Net::Pcap;
NetPacket::Ethernet qw(:strip);
NetPacket::IP qw(:strip);
NetPacket::TCP;
NetPacket::UDP;
DBI;
Unicode::String qw(utf8 latin1 utf16);
Proc::Daemon;
Proc::Simple;
FileHandle;
Unix::Syslog;
GDBM_File;
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedI have an aluminum Macbook from late 2008, model A1278. I just had to replace the hard drive, and need to install an OS on the currently blank HDD. Problem is, my CD drive doesn't work, so I can't just install from a disc. I had installed Mountain Lion on my old hard drive, but the original OS was Snow Leopard. I haven't succeeded in getting any of my information off my old HDD. Is there another way to install either Snow Leopard or Lion onto my new hard drive?
View 1 Replies View RelatedI bought the family pack for Leopard. I installed Leopard on my G4 laptop fine.When I tried tried to install on my G5 I got a fail to install due to a source problem (?)In any event I restarted from the Tiger hard drive and it's totally screwed up my computer. It tries to start and I get initial Apple logo for about 2 seconds then it locks up and I get a bunch of computer code.
Information:
G5
Mac OS X (10.4.9)
Searched the archives but no luck so far. My old PB G4 is running 10.4.11. When I installed the OS, I chose not to install iPhoto and iMovie because I didn't think I'd need them on this machine. I'd now like to add them, but am not sure how to do it without wiping the hard drive and starting completely from the beginning. There's got to be an easier way...right?
View 4 Replies View Related