I am trying to get my wireless speakers (Veho Mimi) and my 3.5mm output to work together. I have tried to aggregate the outputs but it says unable to match clock speed.
View 1 RepliesIs it possible to set my Mac Pro to send sound to multiple outputs simultaneously?
View 2 Replies View RelatedAre there any producers or audio engineers out there who have an opinion on which of the new Mac Pros would be best for a DAW using Pro Tools LE? I'm not able to find much information on whether having more cores or a higher clock speed is beneficial.
View 17 Replies View RelatedWith the new Mac Mini models, you can have audio out via HDMI or the line out. I am thinking to hook the mini up to an LCD TV/monitor via HDMI (sound on the monitor) and also to my other TV/sound system via the mini DP and audio out.
I assume when the mini turns on it'll activate both displays (if they are turned on), and from what I understand you can have two displays running. I'd only want one at a time so I'd have the other display switched off. But can the mini output audio to either both, or whichever system I am using? I've read a lot of posts but can't find a definite answer. I only want audio (and video for that matter, but can turn off other screen) to one TV at a time, but do I have to go into the OS audio settings each time I want to swap between the two?
I'm also thinking of using Plex and keeping it open at all times, just sleeping the mini when not in use. Can the mini only output to one source, requiring manual switching to the other (i.e. going from HDMI to audio out)?
Is there something to report current CPU clock speed? (e.g. on laptops, the CPU multiplier and therefore frequency fluctates with load depending on power profile)... does anything report on this low level activity?On Windows, CPU-z is the tool I would use. Anything similar for OS X?
View 5 Replies View RelatedHave an Extreme base stations and express repeater connected to my DSL services. On my primary iMac connected via ethernet I get 5.25MBps speed. The speed on this computer is always constant. On the remote MacPro I get anywhere from 1.5MBps to 5MPps speed within a half hour of testing.
View 1 Replies View RelatedI have just received a Firewire enclosure for a SuperDrive I bought months ago from the same company, Other World Computing. I was told that they would work together, but now that I'm assembling it, I find that the tiny holes on the drive (very near the edge of the drive, and only two on each side of the top, not the many more that the enclosure seems to indicate should be there. In addition, the holes in the drive and the ones in the enclosure don't match up. The enclosure also is very long for the drive, even allowing for room to attach the ribbon cable and other cables inside.
I have now spoken with three different people at OWC, and nobody knows why this is or how to work out the problem, except to offer me another, less desirable enclosure that they assure me will fit the drive. (I didn't mention that the drive is an older model and that they no longer carry it.) Well, I was assured that the one they have already sent me was just fine for my drive, so you can 't blame me for being a bit wary of the assurances for the other enclosure.
The drive fits very snugly in the enclosure and doesn't seem to shift around. If I replaced a metal piece around the front of the drive that I took off to make it fit more flush with the front of the enclosure, it would be an even tighter fit. It wouldn't look as nice, but it could be done.
My question is I whether I can dispense with putting in those screws, which are meant to secure the drive within the case and keep it from shifting around. (The screws meant to attach the back panel of the enclosure, the one with the internal cables, and the holes in the enclosure will fit together fine, because they are both part of the same thing.)
I would really love to move on with this and not try out anything elselet alone a less good driveif I can.I wonder what you think.I have only a short while before I must make a decision, and I'm leaving for a visit to part of my family in about two weeks. Any input is very welcome.
it seems like every few times i start the computer the balance of the speakers changes from the middle to left or right output. it's not a big big deal, but quite inconvenient. what could be causing this probelm?
View 15 Replies View RelatedThe tower speaker just doesn't cut it and I want to hook up my 5.1 Locitech speaker system. I couldn't find any Mac sound cards on newegg and am having trouble finding results anywhere else. What card is recommended by most Mac Pro users? My professions isn't in audio so it doesn't have to be perfect, just something to play games, music, and movies.
View 5 Replies View RelatedI have a 2.1 Logitech Z4 setup, and the sound is only coming out of the left speaker. I have checked the wires, they are fine, and both speakers do work - but it could be the socket that's the problem. It's plugged into the line-in socket, I have put the output in System Preferences to Headphones, and everything is inserted correctly.
What do I do?
EDIT: My sound system is plugged into the headphones jack. I have tried putting headphones into the headphone jack and the sound also only comes out of the left earbud.
Mine sounds muffled on the left when compared to the right speaker.
Its very noticeable when you play around in your balance settings (max left or max right) that the volumes are different.
I am using both video outputs on the back of the mini, VGA and HDMI. Thes VGA is running to a projector and the HDMI is running to a computer monitor. I am also running Bootcamp WINDOWS 7. When I power up the Mac, the computer monitor goes to sleep and defaults to the projector as the main monitor. If I power on the projector first, before powering the computer on and then power the MAC on, it recongnizes the computer monitor as the default monitor. Why can't the MAC mini recognize the computer monitor(HDMI) as the default when both video outputs are connected?
Info:
Mac mini, Mac OS X (10.6.8), Running Boot Camp with Windows 7
At first glance, this seemed to be an application problem, but two different applications that do similar things are effected by it, so I'm guessing it's more my Mac than the utilities. I have a 5.1 speaker system attached to my G5 via digital out. Switching between internal and external speakers is a PITA (go to System Preferences, etc.). I'd come across Rogue Amoeba's SoundSource, allowing me to switch right from the menu, and all was well. Until it wasn't.
After working just fine for a long while, it suddenly stopped. No explanation--selecting Digital Out didn't switch anything. Tried different things, including a complete uninstall and reinstall of the app, nothing. Ditto after going from 10.4-->10.5. Figured it was one of those things and gave up. Found an alternative utility: PTHVolume, which does something similar, but in different ways. It doesn't even SEE the Digital Out. The Mac OS X Sound Preference Pane works fine, though. What could be wrong that third party apps don't work with the Digital Out?
I've reset the PRAM (because of a totally different issue, actually) but that didn't change anything. Run Diskwarrior to no effect. Repaired permissions, nada. Deleted com.apple.soundpref.plist, no result. Deleted com.apple.audio.DeviceSettings.plist and com.apple.audio.SystemSettings.plist and that made the Sound preference pane disappear, necessitating a reinstall of 10.5 (but other than that, it didn't do anything).
Information:
PowerMac G5 dual-2GHz
Mac OS X (10.5)
So quick backstory my father is the owner of a club and i'm the dj and we are trying to replace our ancient and now broken dj computers with a not so ancient (but still old) dual PM G5 that ive had lying around for a couple years not doing much. We have a couple reasons for doing this and sadly most are for aesthetics because i must admit putting this case in the front booth just adds a bit of class to the whole thing.Well now to my problem/question.Is there anyway to make two different channels come out of the outputs, cause right now if i hook it up one digital and one analog it plays the same sound out of both which well, i can't do. So if thats not possible i guess i could use the pci slots to put a sound card in, but i was also was wondering if anyone knew of a good sound card that worked in this computer.
View 3 Replies View RelatedI have a 3,1 Mac Pro running 10.6.8. I want to watch and listen to a video file that has it's audio sent to the Line Out where I have powered, desktop speakers. At the same time I would like to hear either Pandora or iTunes being played through the USB DAC I have connected to my home stereo system.
View 5 Replies View RelatedI have one particular application I use that requirems me to temporarily switch my audio input and output to different sources. Once I've used the app., I switch them back to their previous state.
I use Soundsource which gives me quick menu-bar access to the inputs/outputs but I still have to set them indiviudally. I was hoping there might be a way to have one or more 'sound sets' which have different combinations of inputs and outputs and then just switch between the sets.
In the absence of any such app. (or is there one?) does anyone know how I could write an Applescript to do this?
Info:
Mac Pro Dual 3GHz, 15GB RAM, ATI 3870, 30, Mac OS X (10.7.2), MBP 17", iMac Intel 20", G4 Mini, MBA 1.8 (2nd Gen)
I will be a hardcore PC guy gone mac soon. I am getting a MAC pro in a few days.
On my PC I run a dell 30'' and a sony XBR3 at 1080P on an 8800gt. It works well.
The one thing that could ruin my mac switching plans is my TV giving me problems.
I will have an ATI and nvidia card on hand for the MAC pro.
so i have a 802.11n airport extreme, but it just seems really slow... i was streaming a movie from a hard drive i have connected to it and it was choppy and it would cut out, i have it set on 802.11n 5ghz only and i have the latest firmware but im not getting very good throughput.
View 1 Replies View Relatedi have a 7 port powered usb hub. the d-link h7 i have a bunch of stuff plugged into it, but theres no way of knowing if its running at usb 1 or 2 speeds. so i just trust it. but when i connect my ipod shuffle to it, itunes pops up saying it's connected through a usb 1 speed. which sucks.
View 1 Replies View RelatedWhat's agood way to test the ethernet port on my G5 Power Mac SP 1.8G? I have other Macs on the network.
My wife complains that the internet is slow & can't stream video.Th is computer is wired to a gigbit switch, then to 100 Mbit switch then to the router. I have a 24" iMac connected to same gigibit switch and have no problem with the internet speed.When I try to send a large file between my iMac & the G5, the transfer is slow. I checked in System Profiler and both computers detect the ethernet speed as 1000 Mbit (1gigabit or something like that).
Ideas on how to resolve? Gigbit ethernet cards that will work in the G5?I don't have Airport on the G5.
So I got my first laptop and decided to splurge and got a mac. Now it's great, works great, took me a while to get used to the OS but love my mac now. I use it predominantly for surfing and just basic but am also doing filmmaking. My friend has a macbook pro with 4gb ram and better proccessor, and we used that for film editing, but want to make upgrade mine into one as well (filmmaking laptop). I also may want to use it for gaming (starcraft), photoshop and just a whole bunch of apps and programs. Should I upgrade the ram, get it upgraded for me (get someone to put in the ram) should I even buy ram, is there anything I can do to make a faster processor? Also, my internet is kinda slow, anything I can do to speed it up? Finally, my mac sometimes lags when there's a lot off apps open so I was thinking of upgrading it. I don't have much of a budget (probably not even a 100) so I need something cheap, but don't want shotty second hand stuff. How much can I add, and what else can I do? On another note, Ive been using firefox as my default browser and have added a whole bunch off addons, any other programs I should get for firefox OR any programs I should get for my mac?
View 10 Replies View RelatedI am running a MacBook Pro 2.2 GHz with a MATSHITA DVD-R UJ-857E drive. Recently I have been trying to burn some video_ts files ripped with MacTheRipper on to 8x Memorex DL DVD +R. I think the problem here is that my drive is only built to handle 4x speeds. I have tried decreasing the speeds in Toast this however has no effect and I still receive a drive error. I have also tried to transform the video_ts folder into multiple different types of disc images and burn them to the DL DVD from the disk utility function. The error I get from here is also a drive error
View 1 Replies View RelatedI just bought a new iMac with 1 processor with a speed of 3.06 GHz, dual core, 4 gigs of memory, and a bus speed of 1.07 GHz.
I'm trying to run an old Tiger Woods golf game on it. When I put in the CD it says the game requires a bus speed of 500 MHz and at least 1 MB of disk space free and the game will not run.
Being brand new, the Mac has almost all of it's memory space available and the speed required (500MHz) for the game is well below the bus speed of my computer (1.07GHz). Any ideas why the game won't run?
Now that I got my 24" LCD that apparently can't be pivot from landscape to portrait mode in OSX, I would like to at least be able to view two web pages side by side, since the 24" display is wide enough for this. Alas, I don't see a way of opening a second instance of Safari (the way you can do it with IE Explorer in Windows side).
View 8 Replies View RelatedI enabled the Mac equivalent to fast user switching (allows more than 1 profile to be logged in); when I want to shut down the system I get box that says other people are signed on, if you want to shut down, enter user name and password.
The problem is that no matter which user id/password combo I put in, it is not recognized; not even either of the admin users.
Im having trouble getting 2 exchange accounts working using osx`s Mail app. When I install one account, it works fine. When i install 2, they both stop working.
They will both send but not recieve mail. Both accounts are on the same Exchange 2007 server.
I find it strange that Mail under iOS 4 works better than under OSX (10.6.4)
I cannot click the + button..
View 3 Replies View RelatedSafari won't let me select multiple files to attach to an email. I can attach more than one file, but I have to attach them one at a time. Is there a setting I need to change or something??
Info:
MacBook Pro (15-inch Late 2011)
we have a macbook pro running Leopard. My wife and I have separate user accounts on the single laptop and keep the music in one central Public folder (both or our iTunes are pointed to this public folder). For some reason, my wife is unable to make any changes to song info (album art, change genre, etc.). However, she can play the music, update her Nano, import music, etc. The only thing she can't do is make changes to the song info. This isn't an issue with my account because I am the primary user account on the computer. We are both set up as Admin and I have assigned Read/Write privileges to all files. Does anyone have any idea what the issue could be? Tech support/program specialist has no idea.
View 7 Replies View RelatedSorry for the title but I couldn't think of anything better. Hopefully I'll be able to explain my problem. I have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...). I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
View 3 Replies View Related