OS X V10.7 Lion :: Can't Print On Canon Ix4000 Connected To Xp Computer At Windows Network
Apr 23, 2012
Trying everything from installing ix4000's driver to CUPS driver and so on. The printer works fine when connected to my MacBook Pro but when trying to print on windows xp network.. nothing happens.
Sometimes it says not authorized some time it keeps on trying.Â
When adding a printer I choose windows and I see it and can add it . The driver is available and everything works fine....But it doesn't print or it seems MBP can't send information to that computer which has the printer. The printer on that computer (XP) is shared . Â
I have a Dlink DIR-615 router and we all are connected to it. Should I follow a defined procedure or what? Idon't know what to do . I even couldn't print a single page..
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
View 3 Replies
ADVERTISEMENT
Mar 25, 2012
We have a Canon MF4380dn (similar to MF4370dn) and we cannot print to it from a MacBook Pro that is running Lion 10.7.3 We have tried connecting via USB and via network and have installed the latest UFR II 2.30 driver from Canon. We have completely removed the drivers and re-added them with no success. It can see the printer when it is connected either via USB or via network and it adds the software correctly. However, whenever we try to print a test page it seems to send it to the printer and then it immediately disappears and no page prints
View 4 Replies
View Related
Mar 20, 2012
I have an Intel iMac running OS 10.7.3 and I'm trying to print to a Canon IPF610 wide format printer. I keep getting a garodclfilter error : 3000. I can print to it from my old Mac G5 running 10.5.8 with no problems. I do have the latest driver installed from Canon's website and also tried reinstalling it several times without any luck.Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 6 Replies
View Related
May 3, 2012
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Sep 10, 2009
I have a printer attached to my desktop running Win 7 and sharing is enabled and my other computers can print to it.Is it possible to set up my MBP to be able to print over the network using this printer?
View 3 Replies
View Related
Apr 27, 2012
I have an Airport Extreme Base Station set up that is connected to my modem. I purchased a new Airport Express that I have used to extend my network. I plugged my Canon MF8050cn printer into the USB port of the airport express. I've added the printer successfully, but when I try printing to the Canon via wifi, I get this error: Â
"Canon CMFP Printer Driver; Printer is not responding.Check the printer power and connection, and then try sending printing job again." Printer power is on and connected correctly. As a side note, I am able to print to the printer successfully when I plug the printer into my macbook air directly via USB. So I have two printers added, "Canon - USB" and "Canon - Wifi". The latter is the one that gives me the error. I purchased the airport express so I could print wirelessly as I'm unable to move my printer closer to the Base Station.Â
Info:
AirPort Express 802.11n (1st Gen), Mac OS X (10.7.3)
View 8 Replies
View Related
May 14, 2012
I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
View 14 Replies
View Related
Apr 14, 2012
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
May 5, 2012
I cannot install the Canon LBP 5000 laser color print on Mac OS LIOX.Â
Info:
iMac, Mac OS X (10.7.1)
View 4 Replies
View Related
May 14, 2012
I had to download software compatible with 10.7.4 in order to run a Canon iX6520 Printer, including Easy - PhotoPrint EX. It worked for a while, but now crashes every time I try to use it, just after clicking on "Print". How to correct this?
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 8, 2012
I have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
View 1 Replies
View Related
Sep 10, 2014
I am trying to print via wireless from my iPad (3rd generation) and iPhone 5 to my new canon MG3520 -- but it seems I have to set this up first to use with airprint? How to do that---? Â
OK I set-up the LAN (first connecting printer to the MacBook Pro running 10.8.5) via USB and then removed the USB cables so that now the iPad and the iPhone can select the printer - but it just prints blank sheets of paper and says there is an error each time.Â
Info:
MacBook Pro, OS X Mountain Lion, Also a Mac SE running 6.0.4 - not upgrading that!
View 1 Replies
View Related
Apr 18, 2012
I have a Macbook Air running Lion. I have been struggling to set up a network printer that has worked for years on Windows and Linux clients (I think it worked with Snow Leopard as well). The set up is a Silex print server C-6200U+ v 2.3.1 with a Canon ip4300 connected to it's USB port. The driver is version 10.51.2.0 and CUPS is version1.5.1. All the latest revs. Currently other clients on the network print using LPR to queue 'lp' on a TCP/IP port. In Windows 7 this is all configurable though the gui with a mouse so I'm not doing anything clever. I have tried a number of iterations of set up on the Mac using CUPS Admin interface and also the System Preferences route. The closest to success has been to set it up as LPD protocol on a fixed ip address with queue 'lp', from this configuration I can successfully print a test page from CUPS or 'Print and Scan'. However when it comes to a 'real' print job from Preview or Word or Adobe, nothing much happens. The print queue says it is 'copying the Print Data' or similar but it just hangs indefinitely.Â
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.1)
View 4 Replies
View Related
Jun 6, 2012
I am new to Mac. Recently I bought a Macbook Air with OS X v10.7. I have a ADSL router with the Canon printer with fixed IP 192.168.2.100. I have a wireless router connected to the ADSL router. This wirless rouer is in another subnet 192.168.3.0.My Windows 7 notebook I am able to print wirelessly to the Canon using a manual configuration (IP printing). As for the Mac, I have installed the latest Canon CUPS drivers and the Canon IJ Network Tool. I use the Canon IJ Network tool, I am not able to scan for the printer. I configure manually with the IP address such as IPP://192.168.2.100 but it still cannot print. The status of printer goes from idle to busy.
Info:
MacBook Air, Mac OS X (10.7.4)
View 3 Replies
View Related
May 8, 2012
I am unable to set up our office Canon image Runner 3225 (iR3225) network printer up. I have followed the steps on both the canon, and apple site. I have also tried driver UFR II (2.24), and other drivers as well. I can look at the printer online but it will not locate it in setup no matter what I do.
I am running OS X Lion 10.7.3
View 13 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 16, 2012
I have a networked printer in my home network. I also have a (working) PPTP VPN set up to connect to that home network while on the road. When I open the VPN tunnel, I can adress all devices on the network, including the printer. I can ping it as well as open its Web front end (via Safari). The only thing that doesn't work is: I can't print over the tunnel! I've tried turning on "send all traffic over VPN", but that didn't help. Some research on the web seems to indicate that the solution lies in an option "Exclude Local LAN from Tunnel". This, however, is not an option for the built-in PPTP client in Lion.Â
Info:
iMac / MacBook, Mac OS X (10.7)
View 4 Replies
View Related
Apr 15, 2012
My hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 20, 2009
it's been a year I have been using a mac and I am 200% enthusiast about it, I also managed to solve all the problems, until now...
I have a black MacBook dated 2008, a Time capsule also dated 2009 and a Canon multifunctional device model i-Sensys MF 4140.
The MF4140 worked great until now when connected via USB.
Now I want to print wireless with the help of my Time capsule, so I connected the MF4140 to Time capsule but it doesn't work. I can see it in System preferences/Print & fax/add via Bonjour but I cannot find the proper driver in Print using...
I already downloaded the proper driver from the official Canon software/driver download web page or I hope so...
View 1 Replies
View Related
Apr 18, 2012
My boss inherited an iMac. It connects to his wireless network and will print a test page, but will not print anything else. He is running Snow Leopard.
Info:IMAC, Mac OS X (10.5.4)
View 1 Replies
View Related
Aug 22, 2014
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640htheÂ
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page. Â
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Jan 17, 2009
I recently purchased a brand new iP4500 and afer installing the latest drivers and setting up everything I cannot print..
The test prints come out OK (thus, the printer connection is good and working). Tried evrything, even tried printing from the root user. I spent 45 minutes with Canon Tech Support and they basically said "There's a problem with your system not spooling properly, and there's nothing else we can do from here, go to Apple"
Now here's the deal, I have two iMacs (one g5, one Intel, both with 10.5.6 but otherwise differently configurated) And I get the same error in BOTH.
Is there anything I could be doing wrong?
Can I have any suggestions to get this going?
View 2 Replies
View Related
Dec 1, 2014
trying to use OS X yosemite with Canon MF 4890 printer. Dowloaded driver, still showing not responding.
View 8 Replies
View Related
Jun 2, 2014
All of a sudden I cannot print to my Canon MF4370dn. I am connected via the wifi network. I didnt have a problem with any of this until a week ago. I called Comcast and they told me that they connections were good. I know this is true since my ADT service is working just fine and it is connected to this network.Â
I called Canon and they are not supportive at all. They tried to uninstall and reinstall printer but it still did not work.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 1 Replies
View Related
Dec 31, 2010
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
View 2 Replies
View Related
Mar 17, 2008
I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop.
View 2 Replies
View Related
Feb 25, 2009
I have a Canon Pixma MX700 connected to a PC and am able to print text/word files from my MAC to the printer via the router without any problems. However, whenever I try to print a document containing a table or a graphic, it doesn't print in the right place, and there is often a blue 'echo' of the table or image that also prints. I am currently using a gutenprint driver.
View 3 Replies
View Related
Feb 21, 2012
I have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Dec 9, 2014
I have a Macbook air and my printer is a canon 6150.Â
When I go to print it doesn't always print out properly when I am using word and adobe pdf files. It seems to print ok when I open documents in preview.Â
I have been on the phone to canon and reinstalled the printer drivers and tested the printer by doing a colour copy and printing on my phone. Both of these work. As these work the cannon dude says its something to do with the setting in my computer rather than an issue with the printer.Â
View 1 Replies
View Related
Jun 15, 2012
How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.
View 3 Replies
View Related
