OS X :: MagSafe Made Pop Sound - Temporarily Disabled
Jul 25, 2010
This morning when I plugged in my MagSafe Power Adapter to my MacBook Pro, I heard a 'pop' sound. It sounded like fuse going or something. Then I noticed that the Green light was not turning on, nor was the Amber light. I then unplugged everything and let it sit there for about 30 seconds and then plugged everything back in. The Green light then turned on and the MBP recognized it as a power source. The question is should I be worried? AppleCare expires for me in December of this year.
I temporarily lost all sound on my MacBook Pro. I hooked it up to my television and had good sound. Then I unplugged it from the TV and lost all sound. I couldn't get sound through the speakers on my computer, television, or iPod headphones. I went online and searched for similar problems. I was amazed at how many people had the same problem. Many of these people were forced to send their computers to Apple to have it fixed. I found this: [URL]
When I booted up my computer this morning, I realized that the volume icon in the menu bar was missing. I tried to adjust the volume with the keyboard, but an icon came up that makes it seem like it's locked. I went into System Preferences and under Sound, the computer doesn't seem to find the speakers for output or the internal microphone and line-in for input. Has anyone else had this problem?
Circa early January 2004 12" iBook, 800mhz running 10.4.?? (my daughter uses it - i think i upgraded it last month when i put iWork on it). She's been having issues with it turning on - can take awhile. But once it's on, it runs and runs (gee the battery is better than my MBP). She just went to turn it on, and there was this NOISE. Not a normal "problem chime" - i've heard those before, unless they don't chime like they did in the old days, it wasn't that. It then turned on, made the normal power up chime and she is now moving some files she wants to save to the Time Capsule Disk. It could have been another noise that got stretched out. She says sometimes if she plugs it in as it's booting it will freeze. Could she not tell me these things when they happen? I don't want to sink any money into it for repair - but dang, the budget needs to squeeze ME a new computer for recording school classes, not her a new laptop. So basically, could it just be a random noise? She said it's never done it before, here is hoping it doesn't do it again.
I got a Powerbook 190 from my grandfather. He didn't give me the cord to plug it in with. He gave me the cord that has the big box, that connects to the computer. It was missing the cord that goes from the box to the wall. I read that it said to ONLY use an apple cord.My step dad said "that's not how electricity works." and gave me a regular, random computer cord. I was unsure, but plugged him in anyway.
He worked perfectly for one night. No problem at all. Booted up right away. I played on him for a few hours. It was time to go to bed.
He hasn't woken up since. He's made the start up sound a few times, but never starts up. I've pushed the reset button on the back a thousand times. At least what I THINK is the reset button. They just say under the video out port, but I don't know what that looks like. What I'm pressing is a small, very flat, wide (but still very small) rectangle of a button. Nothing. I've held it down for 40 seconds, 4 or 5 times. I've taken the battery out, and then held the reset button. Nothing. I've tried everything I know to do, for about a month now.
I left him alone for a few weeks. I plugged him in today, and it made the start up sound, and then nothing.
Can I save him? How? Should I try an apple-specific computer cord? Do I need a new battery? If I did, wouldn't it start up with the battery out, but still plugged into the wall? Fried motherboard?
I even found a freaking airport card that'll work with it, and an external floppy disk for my new mac, so I can transfer files from one to the other. I was so excited about him. And my dreams were crushed.
I was wondering if anyone knows of a fix for my iMac 21.5" which seems to disable the onboard sound upon restarting?Â
I understand that this can be remedied by resetting the SMC but I cannot be expected to do this each and every time the machine is restarted. Is there any way I can get it to work permanently?Â
Upon restarting the volume icon is greyed out, and pressing the volume up/down keys bring up the volume box with a "no entry" sign underneath the icon. I've tried unplugging and replugging the external speakers to no avail, and this occurs with the internal speakers also. I've checked the correct device is selected in the volume settings and the optical output is not switched on.
So as the title says when I boot up my iMac, on occasion, it seems to have the "Updating" Status bar, then the mac boots normally, then the sound is disabled. As I said though this dose not happed all the time but when it dose the only way to fix it is by rebooting the iMac once again. Processor 2.5 GHz Intel Core i5Memory 8 GB 1333 MHz DDR3Graphics AMD Radeon HD 6750M 512 MBSoftware Mac OS X Lion 10.7.3 (11D50b)
Info: iMac, Mac OS X (10.7.3), Has Parallels Desktop Installed
I'm basically trying to make a "save as" version of a project so I can change what I have without risk of losing everything I've done. But every time I save a new version of the project (and even rename it, store it on another drive, etc.), the changes I make to the new version are also made to the original.I'm also not getting the popup "duplicate project" window (which should give me a choice of where and how to save the project) I'm supposed to get when I click on "Duplicate Project." How can I simply save a fixed version of my project?Â
intel disabled and flashpoint too after doing updates on my imac desk top computer how can I fix this for at certain places I go to it says no plugins
I've got the new i5 mbp which has the right angle magsafe plug. Can I use any older magsafe adapter on the machine?I need 2 more (one for work and one for home), i'm too lazy to take it out of the bag, or I always forget to put it back when I need it.
I'd like to restore the Dock from CoreServices when I first installed Leopard. When I click restore it doesn't let me restore it because the Dock is now in use.
I like to have the application dock auto hide on my mac book pro, but I also have a couple applications that require me to click near the bottom of the window. Is it possible to temporarily disable the dock from appearing while I move the mouse near the bottom of the screen, perhaps like it's possible to disable the magnification with one of the modifier buttons?
I'm going to upgrade my harddrives soon. I use about 300gb of space in my hd, and want to upgrade to a raid-0 (2x1tero) hd configuration... and use my current 500gb drive for my time machine hd. Will that work up until i approach 400-500 gb? Or do i need a 2 tero hd for time machine to work at all? I am not that concerned with having time machine go back too far, i just want an uptodate backup mostly...
My son is 8 months old and he keeps attacking the keys while I am surffing the web and I was wondering if there is a way for me to lock the keys so when he is watching videos online he does not interupt them
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
As much as I trust him, I have a suspicion he might vandalise my facebook or bid on something on ebay, since firefox remembers my passwords. So, if I drag firefox out of applications and onto a pendrive, will i be able to stop it working and then drag it back on the next day? (I know it would work with most apps, but I don't know where firefox keeps passwords and cookies etc)
I have had this problem for some time, on Leopard and on Snow Leopard (don't remember about Tiger), where my mac freezes for 2-5 seconds when my external drives are woken up. This happens often when I access the "file open" window, it will just sit there until the drive is started.
I have a Mac Pro with all hard drive slots filled. The first two disks (includes startup disk) are independent, and 3 and 4 are set up in a RAID 1 mirror. I have to take my computer into the Apple store for a repair and I'd like to just take out all the disks except for my startup disk... however I'm not sure how to go about doing so for the RAID. If I take the drives out, and boot up the computer with them no longer inside, will the computer "freak out" and/or will the computer no longer recognize the RAID if I put them back in again later?
If the latter is the case, will the data be lost or would I just have to set up the RAID again... and if I do that, will that also cause the data on the drives to be lost, or is it possible for it to mirror them again without needing to make changes to the data?
is there a way of making the last few accounts that have logged in to be stored on the client computer temporarily, just incase the server ever went down? There is such a setting in Windows Server 2003, I'm just wondering if Apple has anything that does that.
I have an additional HDD in my powermac and TM is set to auto back to this but what i want to do is run a backup to an external HDD from which i will import the data to my parents computer so that i have another backup of my stuff in a different location for safety's sake but i didn;t think you could change the location of the back up on a temporary basis and that all you could do is run a fresh backup on the external drive and re-run another back up which will take ages again onto my existing hdd.
Info:PowerMac, Mac OS X (10.5.8), 1.8GHZ 4GB 300GB Iiyama Pro-510
On my iMac I have 2 operating systems installed, and Windows 7 and Mac OSX. Until recently I did not use OSX, but I tried as it looks. But now, back when I want Windows 7, I will begin when you turn to run Mac OSX. I know how to switch to Windows, but only temporarily, off the PC and when starting to hold the Alt key and selected by Windows. But after turning the PC begins to load OSX again.
I Have a Question about iCal & what would be the best way to set up a calender that displays work days but also shows "Holiday" time in the same calender At the present time it has the work times set to repeat weekly but the main issue I have is when I put the "Holiday" time in I don't want the work events popping up every day on the break. I know there isn't much I can do with it but I will like to hear your thoughts.
I noticed my trackpad started acting funky last night. It won't happen right away when I turn my MBP on, but usually after some time (depends). First thing that happens: it responds slowly; it will move the pointer less than it would normally and it will judder along. Pressing harder doesn't help and sometimes two-finger scrolling won't work one way, or sometimes using my other finger will work better. After some more time, it will stop responding entirely or get unusably slow. I noticed restarting fixes it (temporarily; once again, it depends). Just before posting this, it happened until it didn't want to work at all, and I let it sit for a few minutes, came back, and it worked fine. Ten or so minutes later, its still working (no restart). It's troubling and I'll probably take it to an Apple Store to have it checked out, but I won't have time to do that for some time, so I'd like to see if this is possibly something well-known or fixable.
I thought it might be dirty, but I cleaned it, well, a few times, and still nothing. My hands are clean, too. I thought it might be something I "spilled" onto my keyboard a few days earlier; it wasn't anything watery, it was a rather thick consistency. I hope that isn't it, as I cleaned it quick and well, and it wasn't on the trackpad, and the keyboard works perfectly. The only thing I was doing when it first happened was video chatting via MSN (MSN gets my Mac hot, and I was worried it was the heat that did something, but IDK for sure). I only started using MSN about a week ago, and it gets my Mac really heated each time I use it. I did some searching on Google about this, but nothing quite like my situation. I haven't looked at everything, but, nothing yet.
I recently got a MBP (i7 2.66ghz, 8gbs ram, 7200rpm hard drive) and since I got it apps seem to temporarily (like for 10-15 seconds) freeze (only 1 at any time normally) and i'll get the spinning beach ball thing. Even if I only have say 1 app open (like safari) it'll hang up for 10 or so seconds randomly. It happens say maybe once or twice every hour (but having said that i've used it hours at once with a lot more than one application open and it hasn't done it) on various apps and I don't know why. Is it normal? I wouldn't think 1 app such as safari or itunes running should do that? It's not a problem(?) that bothers me really, I just want to know if something might be wrong? I've only had the notebook for a week so far and it's my first Mac.
Experiment Results: Temporarily removing Events and Projects from libraryÂ
REASON: I wanted to test removing events and especially ram-hungry projects from FCPX 10.1 to unclog the app a bit. I've been getting lots of spinning wheel time and dropdown windows saying projects unopened and unneeded were being loaded.Â
METHOD: I copied a library to another drive and experimented by manually removing some events made up entirely of projects. Why not remove them? There seems to be hysteria about manually touching the library but no one relates an actual incident that highlights how things can go wrong.Â
I copied a library to another drive and experimented by manually removing some events made up entirely of projects.  The projects are early versions of segments of feature length doc I most likely will never need to bring back in. After removing an Event that had only Projects, FCPX opened no problem and a lot quicker.Â
ODDITY: Removed Events names still appeared with the twirly triangle beside them tho the event icon didn't appear and the Events were empty. I tried trashing them but couldn’t. I then closed fcpx and removed media. Reopened no problem. Closed. Â
Returned Event folders and media to their proper place, reopened no problem. The projects were all there tho their icons were blank at first but then after a couple minutes pics started appearing in them and pretty soon all seemed normal. I opened projects, they worked, no problem.Â
Moving projects & media manually between events—This may be where things get dicey, but you could do this manually with earlier versions of FCPX. It's not something I would do normally since ti's too easy to do in FCPX. But since I have this copy I might try it just to see what happens. If you don't experiment it's not science it's religion.
