PowerPC :: 190cs - Made Start Up Sound A Few Times But Never Starts Up
Jul 16, 2008
I got a Powerbook 190 from my grandfather. He didn't give me the cord to plug it in with. He gave me the cord that has the big box, that connects to the computer. It was missing the cord that goes from the box to the wall. I read that it said to ONLY use an apple cord.My step dad said "that's not how electricity works." and gave me a regular, random computer cord. I was unsure, but plugged him in anyway.
He worked perfectly for one night. No problem at all. Booted up right away. I played on him for a few hours. It was time to go to bed.
He hasn't woken up since. He's made the start up sound a few times, but never starts up. I've pushed the reset button on the back a thousand times. At least what I THINK is the reset button. They just say under the video out port, but I don't know what that looks like. What I'm pressing is a small, very flat, wide (but still very small) rectangle of a button. Nothing. I've held it down for 40 seconds, 4 or 5 times. I've taken the battery out, and then held the reset button. Nothing. I've tried everything I know to do, for about a month now.
I left him alone for a few weeks. I plugged him in today, and it made the start up sound, and then nothing.
Can I save him? How? Should I try an apple-specific computer cord? Do I need a new battery? If I did, wouldn't it start up with the battery out, but still plugged into the wall? Fried motherboard?
I even found a freaking airport card that'll work with it, and an external floppy disk for my new mac, so I can transfer files from one to the other. I was so excited about him. And my dreams were crushed.
Circa early January 2004 12" iBook, 800mhz running 10.4.?? (my daughter uses it - i think i upgraded it last month when i put iWork on it). She's been having issues with it turning on - can take awhile. But once it's on, it runs and runs (gee the battery is better than my MBP). She just went to turn it on, and there was this NOISE. Not a normal "problem chime" - i've heard those before, unless they don't chime like they did in the old days, it wasn't that. It then turned on, made the normal power up chime and she is now moving some files she wants to save to the Time Capsule Disk. It could have been another noise that got stretched out. She says sometimes if she plugs it in as it's booting it will freeze. Could she not tell me these things when they happen? I don't want to sink any money into it for repair - but dang, the budget needs to squeeze ME a new computer for recording school classes, not her a new laptop. So basically, could it just be a random noise? She said it's never done it before, here is hoping it doesn't do it again.
I'm trying to help a friend get into her old PowerBook 165 but we can't get it to boot up. Whenever it turns on we get the BONG startup sound and then it just flashes a floppy drive with a question mark. We can't get it to go any further and we're at a loss for how to get the files off of it now.
I have this powerbook from 2005 and no problems up to now..ohhh no!
A couple of days ago started to occasionally make a clank clank noise and getting stacked on the spinning colour circle, only manual restart would do it.
Thought it might be the hard disk as it is a bit old and i never replaced anything on it, shacked it and a noise of something loose would happen, so i thought of opening it up and see if i could reattach anything loose....anyway i started unscrewing following instructions, couldn't get memory out...every screw seems different and so i gave up, put it all back together, praying that the screws are all in their right places and hey, now it wont even start, not a loose sound when shaken though, but not a bip not a light, black screen, nothing...only sign of life is the green light under the num block key and the capitals arrow also starts light
This morning when I plugged in my MagSafe Power Adapter to my MacBook Pro, I heard a 'pop' sound. It sounded like fuse going or something. Then I noticed that the Green light was not turning on, nor was the Amber light. I then unplugged everything and let it sit there for about 30 seconds and then plugged everything back in. The Green light then turned on and the MBP recognized it as a power source. The question is should I be worried? AppleCare expires for me in December of this year.
I am a new mac user and a sound similar to the "Frog" sound effect keeps playing at random times and with no apparent reason. It just plays and at different times...Sometimes it's every 20 seconds, sometimes more or less. I disabled the sound in System Preferences and it kept playing. I don't know what else to do since i'm new with mac I also reseted the PRAM and it stopped for a while but now it started again. I've noticed that most of the times it sounds when i'm charging the battery, i don't know if it has something to do.
My newest discovery is that when my computer freezes up what ever sound is playing makes a skipping noise and then I have to kill power to shut off what is the cause or how can I find out is there any log I can run or check to see the last action process that went on?
I recently received a Power Mac G5 from work. They told me I could have it, but reformatting the hard drive and reinstalling the OS was on me. So, I took it home, and plugged it in to turn it on, and the white light on the front blinks 3 times and then stays steady... and then blinks 3 times again... and so on and so on.
The RAM that came with it was bad, so I put in 2, 1 GB PC3200 sticks in it. Isn't it a RAM problem?
Why does my computer start running loud at different times of using it? It is random and not always when it is getting hot. Is this normal or do i need to call Apple to replace my computer?
my macbook pro fans some times start making a noise like when you insert some cd and it gets hot i havent drop water or drop it its very weird it started to do that yesterday and i bought this mac in december so really i dont know what is happening?
I just had a question about my fan, whenever I'm on my computer for about 30 minutes plus, my fan starts making a kind of grinding sound, and my computer exceeds 200�F. I do play World of Warcraft, and I know this most likely causes the heating issue, but it only started about 2 months ago. And i bought my Mac mid-2009 and have had no problems until now.
my Macbook wont start-up. When I switch it on it comes up with a flashing folder with a question mark in. I have been advised to start from my Mac OS X installation disk.
However, the website says "Insert your Mac OS X installation disc (if you have discs with both versions, use whichever is closest to the Mac OS X version installed on your Mac; do not use a startup disc which came with a different Mac or which contains an earlier version of Mac OS X)."
My original installation disks are Mac OS X 10.4. But I have been upgrading my system. My last upgrade was to Mac OS X 10.6.
Which disk do I use? Do I use the 10.6, as this is the one with the current operating system or do I use 10.4 as this was the original disk that was bought with the macbook.
I'm basically trying to make a "save as" version of a project so I can change what I have without risk of losing everything I've done. But every time I save a new version of the project (and even rename it, store it on another drive, etc.), the changes I make to the new version are also made to the original.I'm also not getting the popup "duplicate project" window (which should give me a choice of where and how to save the project) I'm supposed to get when I click on "Duplicate Project." How can I simply save a fixed version of my project?Â
For some reason my iBook froze up, so I held the power button til it went off, then started it back up and now it just beeps 3 times and nothing, what is wrong with it?
The computer I am having problems with is a Mac Dual 2.7 Ghz Power PC G5 with 3.75 GB DDR SDRAM. Moved premises at start of year - had to have a new ethernet adapter card fitted but no problems for about 4 months. Then it started having Kernel Panics. It got to the stage where at one time it was 3 to 4 times a day. Took it to a local repair shop who put it on test but said they couldn't find a problem. Within 10 minutes of my switching it on it went again. They changed a memory board. Still no change. Changed Ethernet adapter card. Still no change. I have a print out of the latest system & console logs I can email if that will help an expert.
I have posted a question on the Apple site, I would like to get some input from the people here as well.I wont bother typing out the whole thing, much simpler to let you go have a quick read at the questions and solutions I have tried.
I'm pretty new here, though I posted over a year ago here with a few questions as a beginning switcher. My switch completed in Christmas of 2005 with a late '05 Power Mac G5 Dual-Core 2.3GHz with 1GB RAM and 250GB HDD. I decided to get another monitor and it is a Sony 19" LCD one. I also didn't get any speakers since I used headphones a lot at the time. I recently decided to start using speakers. So temporarily, I am using the Altec Lansing BX1120 2.0 Stereo speakers from Walmart for only $15. They sound great but I would like 5.1 surround sound to watch my DVDs (and to soon upgrade to BluRay & SACD/DVD-A; but that's for another thread later on). Before I go on, I would like to ask questions and provide facts with what my 'puter has. My specific products I'm looking for is at the bottom of this message.
I have an iMac G5 that is starting up, then working okay for 1-2 minutes. After that, the processor usage goes way up, and the fans start spinning loudly. It's a first generation 1.8 GHz with a 17" display. Mac OS X Leopard. Recently, it spun up and then shut down and wouldn't start again. The room it's in is < 75 degrees F. No malodor, or other symptoms save for hot to the touch. Has been left shut off and unplugged for a few hours, and still has this problem.
besides leaving your computer on mute is there a way to turn off the startup noise on a mac? When i come late to class and want to bootup my computer, the apple startup noise draws attention to the fact that i am late and booting up my macbook.
Just bought today, brand new mac pro 8 core 2.8ghz. I get a weird click on both boot and start up or when I put the computer to sleep or wake it. It's a single click, imagine the sound of someone lightly flicking the side of an empty Pepsi can. It's not random, I can make it do the sound simply by unplugging or re-plugging the power cord in the back. Is this normal?
I have a Mac air (bought it last year) and today won't start up at all!!it does not produce any sound nor I can hear the fun. no video .no activity at all. The power cable is connected and light is green.
I'm doing my best not to panic here but I'm sure you can feel my pain. I got up this morning, made my coffee and opened up my MBP to start my day.
I can hear that start up sound but the screen is completely black. Nothing. It was fine yesterday and I didn't do anything different when I closed it to put it in sleep mode. But now it won't wake up. I pulled the battery, let it cool (seemed a little warm since I just started it)....still black screen.
I am running the 27" iMac with dual hard drives and have recently upgraded to Lion. Two things are happening.
1. On cold start / boot up, my system has no sound. And by no sound I mean - no sound. When I go to the Sound option in System Preferences, everything is greyed out and I can not adjust or access any of the controls. The only solution has been to immediately restart my computer. After restart, everything is fine.
2. On cold start / boot up, sometimes I receive a pop up telling me that TestGen is not installed properly and to please re-start. Of course, since I have no sound I'm automatically doing that.
Lastly, and I'm not adding this to the list because there is already a thread about it . . but I will mention it I am getting error messages trying to play certain videos "This video requires Quicktime which is not supported by this version of iTunes."The workaround is that you apparently have to delete the video from your Library -- DO NOT DELETE FILE FROM HARD DRIVE -- and re-add to your Library.
So as the title says when I boot up my iMac, on occasion, it seems to have the "Updating" Status bar, then the mac boots normally, then the sound is disabled. As I said though this dose not happed all the time but when it dose the only way to fix it is by rebooting the iMac once again. Processor 2.5 GHz Intel Core i5Memory 8 GB 1333 MHz DDR3Graphics AMD Radeon HD 6750M 512 MBSoftware Mac OS X Lion 10.7.3 (11D50b)
Info: iMac, Mac OS X (10.7.3), Has Parallels Desktop Installed
