MacBook :: Repair Disk Option Not Available In OS X Tiger
Jun 30, 2012The option for "Repair Disk" in my Disk Utility is not available. I have a Macbook2, 1, running on Tiger.
Info:
MacBook, Mac OS X (10.4.11)
The option for "Repair Disk" in my Disk Utility is not available. I have a Macbook2, 1, running on Tiger.
Info:
MacBook, Mac OS X (10.4.11)
I have a mbp 13" with snow leopard. I go to disk utilities to verify my disk (Macintosh HD) and it says I need to repair it after I start the comp with a disk like the mac osx installation cd. I do that and then verify disk again (because the "repair disk" is still grey/un-clickable) and it gives me the same message. How do I repair the disk?
View 5 Replies View RelatedI ran my usual check on the mac drive via "Verify Disk" option. It came up with "needs repair"...etc., and told me to repair it. I did a command r during boot so I could do a repair, and the software told me "your mac drive seems to be ok"??? Some kind of glitch, or need I worry about it at all?
Info:
27' iMac 2.7 GHz Intel Core i5, Mac OS X (10.7.2), Sony VPCL116FX Intel Core 2 Quad 2.66GHz 6G Ram 64b Win7
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies View RelatedMacbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
Info:
MacBook Pro, Mac OS X (10.7.2)
"it is possible to completely erase a hard drive and install Snow Leopard without a pre-existing operating system in place, enabling users to bypass the possible headaches of an upgrade and go with a clean install instead. Wired said many users upgrading from Tiger should probably consider backing up their files from Tiger and doing a clean install instead."
I don't have an external harddrive. What other backup options do I have?
i have just tried a legal version on final cut pro 7 and it runs very slow on my macbook pro. and so does my mac after i close the program and i mean very slow like it takes five mins for my curser to make the icons pop up.
i have run disk warrior and though i cant run the repair disk as it is my start up disk. but i did run the graph on disk warrior and it shows that my disk is 42% ineffective.
I just saw that the amount of memory left on my HD just dropped around 60GB, so I used the "Verify Disk" option on Disk Utility, and the output was: Verifying volume “Macintosh HD”Performing live verification.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.Checking volume bitmap.Checking volume information.Volume header needs minor repairThe volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. Start up your computer with another disk(such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I don't have the disk right now, so is there some other way I can repair it, get another install disk, or anything else? I've been thinking of booting up with a Linux livecd, but can it access the HFS+ filesystem?
Info:
MacBook, Mac OS X (10.6.8)
Ive recently had to repair my startup disc volume/reinstall Tiger and now my iPod doesnt store songs after I sync it. All of my music is in iTunes and everything else seems to be working however once I disconnect my iPod NOTHING is there.
Ive been looking through all the previous discussions but cant seem to fix this on my own. And Im not even sure if I should be posting this question on here or in another forum...because Ive also noticed that there are no pictures in iPhoto .when I did the repair...it asked me if I wanted to save a copy of the previous system which I did.
Info:
PowerBook, Mac OS X (10.4.11)
My Macbook crashed so I tried everything to restart it. what finally worked is opening it from the install disk. I performed a "repair disk", and after saying "invalid node structure" and "invalid record count", it says it cannot repair the disk. I don't know what step to take next. How do I see if time machine has backed my files up? Do I need to erase the HD and reinstall?
Info:
MacBook
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies View RelatedRunning Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies View RelatedI have a very old E Mac running version OS X version 10.1.5. My Mac is showing a flashing question mark so I have tried to repair it using the Install Disk provided with my E Mac. Unfortunately, when I insert my Mac OS X Install disk (which is for version 10.1.4) and press the C key at startup and click on Disk Utility the "Repair Disk" button is greyed out (although I am able to Verify the Disk.) How do I get round this problem? (I should add that I have had the flashing question mark once before, and I was able to repair my E Mac on that occasion as I was able at that time to click on the "Repair Disk" button. However, I can no longer do this.)
I have also tried using my OS 9 Install Disk, as I was using OS 9 the last time before the flashing question mark appeared. When I go into Disk Utility using that disk, I am able to click on the "Repair Disk" button but it lists errors that it says it is unable to repair.
Info:
eMac, Mac OS X (10.1.x)
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
how do I repair disk using disk utility
Info:
MacBook Air, OS X Yosemite (10.10.1)
Model Name:MacBook Pro
Model Identifier:MacBookPro3,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.4 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache:4 MB
Memory:2 GB
Bus Speed:800 MHz
Boot ROM Version:MBP31.0070.B07
SMC Version (system):1.16f11
Serial Number (system):W87422DCYAM
Hardware UUID:00000000-0000-1000-8000-001B63A49B75
OS X 10.5.8
I am unable to use my OS X disks to boot from. The DVD drive tries to read and then ejects them. Blank DVD's can be formatted and written. The text below is what repair disk reports: ACL found but not expected on "Applications/Utilities". Permissions repair complete
My son has a MacBook, but the optical drive is broken. The HD needs repairing from the disc. How do I repair his disc using the Installation CD on my MacBookPro.?
I have tried restarting his computer while pressing: command C, also optionC, furthermore option-command-C and alternatively using D instead of C, but it restarts in the administrators password window....
And on mine, I have opened migration assistant and put in the disc so its readable to my computer...
It seems I have 2 problems. The rebooting on the C-D letters don't seem to work, and is it with the migration assistant that I can hel repair the disc?
After upgrade to 10.7.4 my MacBook Pro booting properly. But If I try check of disk by disk utility, then this finished by error message (disk need repair). When I boot to repair partion and use disk utility, everything looks OK. But when I booting back to Lion, disk utility still reported disk neet repair. I am a confused... I using FileVault.
Info:
MacBook Pro
Yesterday I decided to Install Windows Xp on my Mac. I tried to partition it but BootCamp said, "Verifying failed. BootCamp can't partition disk." So I started reading about this problem on the Internet and I found out that I have to use the Mac OS X Installation Disk and use the Disk Utility to "Repair" the disk. I started Disk Utility and clicked "Repair". Many files were missing so it tried to repair it. So now when I start the Apple-logo and the loading-circle is "frozen", so it just loads and loads and loads and loads, and nothing happens. I decided to format the disk from Disk Utility but I can't format it! I can't do nothing! So now I cant start my Mac! If it is possible to take a backup or something before I format it, or keep the files it would be lovely!
View 1 Replies View Related