its wierd, its 60 degrees celsium and 2300rpm fans (without any smc fan manglers) just FRESHLY rebooted, and completely CLEAN install! without anything. odesnt matter if its 10.5 or 10.6.
it used to be 44 degrees and 1800rpm fans! and 40 degrees with 2000rpm fans on 10.5. .
My old hitachi HDD went on the fritz and I obviously don't want to replace the corrupt hard drive with another hitachi HDD. I'm looking for an SSD to install. I don't need a huge drive because my data's in the cloud for storage so I'm looking at the SSD.
I would like to purchase the intel 330 120gb SSD. Here are my basic specs:
MBP late 2008 unibody 2.8ghz processor
4gb ram
NVIDIA 9600
250gb Hitachi 2.5" HDD (this is the original corrupt drive I want to replace)
-How does TRIM work on the mac? Will I have TRIM issues with the intel 330? How do I go about this?
-Has anyone had any 1.5gb negotiation rate issues? How did you resolve them?
-Any other installation issues I should be aware of and workarounds for them?
Info:
MacBook Pro 15" (Late 2008), 2.8ghz processor, 4gb ram, NVIDIA 9600
I bought a new harddrive to upgrade my macbook's old hard drive to a new one over the spring break. I tried to unscrew the screw on the black plastic retaining bar, but I unfortunately failed to do so: even worse, the screw is completely stripped now!
Since the screw is so small, I don't think I can use any of the "Easy Out" kind of unscrewing stripped screw tools... or can I? Wouldn't I damage the retaining bar? What should I do?
Does the late 2008 unibody Macbook pro have Sata II or III?I have an Apple branded 256GB SSD and It isnt booting up as fast as I think it could be. I am wondering if my logic board supports sata III because I think the SSD could be Sata II.
Info:
MacBook Pro, Mac OS X (10.7.3), SSD 256 GB with 8GB of RAM
My Mac feels as if it is running slower these last couple of months. I have thought of pursuing a commercially available "clean up" product, but thought I would try the community first and also for pointers using the Mac's own internal diagnostics or system improvement capabilities. Any and all advice is most welcome. I have a 250GB hard drive that is half full, I always update to latest revisions and have an extra high-speed internet connection. Computer is not heavily loaded with apps and typically using Firefox for browsing. (MS Office for Mac as well, but usually limited to one program such as MS Word or Excel at a time.) No heavy graphics utilization. Videos from the internet load slowly and some are choppy. Even scrolling just doesn't seem "brisk".
Info:
MacBook Pro, Mac OS X (10.7.3), 2.53/4GB Ram
I've noticed recently that occasionally my screen will intermittently flicker.
It doesn't seem to be tied to anything specific. Just a random black screen flash.
I did some google searches, but could not find anything that was exactly my issue. I have a 2008 MBP unibody. If the MBP is on battery only and I close the lid, the notebook shuts down completely. This is even when the battery is fully charged. However if while plugged in and I do the same, the computer "sleeps" as advertised. I have reset both the SMC and PRAM to no avail. The main thing that bothers me is it seems like when this happens on battery, its almost as if the computer is getting a hard shut down. The machine acts as if the battery was pulled while the lid was closed and this is obviously not good for the hardware or sofware.
Info:
MacBook Pro, Mac OS X (10.7.4)
I recently purchased a Late 2008 Unibody MacBook. I am thrilled! Yet I seem to be having the same charging issue MANY other people have had and have still not found a solution. Basically, as with everyone else, when I connected the Magsafe connector, it stays on finishing charge as if stuck there. I have left it for 2 full days and nights now with no luck. I have calibrated the battery and it is still doing it. The battery only shows 60 cycles and it's health it at 80%. I've even reset the SMC with no avail.
Info:
MacBook, Mac OS X (10.7.3)
I Have an October 2008 Macbook Unibody 13.3 and after installing Lion the CPU fan stays permanently on and the battery drains in 2 hours. What can I do to fix this?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I did this for the Macbook Pro's a while back, but I'm a Macbook guy now. There are a few other threads with profiles but it's no good if you use a profile made from a different panel than what you have. I'm just trying to consolidate things here.
I will try to keep this post current; please only submit profiles created from hardware, not those done by human eye (meatware?) And be sure to say which panel the profile is for. Thanks to everyone for contributing and improving the Macbook experience!
How to determine your panel type/code
How to install and use color profiles
Basic tests to determine if a profile is a good fit:
Black level
White level
Gamma
9C89 (LG)
See attachment (rezonat0r-9c89.zip)Spyder3 Pro. 2.2 Gamma, Native and 6500K whitepoint. I recommend using the Native whitepoint.See attachment (rezonat0r-9c89-alt.zip)Spyder3 Pro. 2.2 Gamma, Native whitepoint. This is an alternate profile made from another Macbook with the LG panel. It is similar to the previous but slightly darkerjessica's profileSpyder2 Pro. 2.2 Gamma. Native whitepoint (I think - not confirmed)
9C8C (AU Optronics)
See attachment (rezonat0r-9c8c.zip)Spyder3 Pro. 2.2 Gamma. I only did a calibration at native whitepoint (honestly, if you really need 6500K then you won't be using a Macbook screen, or any laptop screen for that matter)
9C8A
See attachment (rezonat0r-9c8a.zip)Spyder3 Pro. 2.2 Gamma. Native whitepoint.
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).
This is the "Trackpad Firmware Update" from the automatic updates.
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point.
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
I'm looking to run two extra screens off of my unibody 15" MBP while still using the screen on the notebook itself for intensive video-editing between FCP and the adobe series. I understand the maximum resolution the mini-dvi port can handle is 1920x1200--no problem. Now, does the maximum resolution change at all if I am running two external monitors (one using the mini DVI port and the other using a USB port via VGA/DVI adaptor to USB).
Can the graphics card handle running three screens at once along with FCP,After Effects, and Illustrator? Can the USB port also push 1920x1200? Or does the USB port on the MBP (I understand each adapter can have different capacities) have a different limit? Or is that 1920x1200 limit the maximum a sole mini-DVI cord can push? You might just say, hey buy a 30" ACD and use the usb/mini-dvi ports to run that at an even GREATER resolution. But alas, I cannot afford to do that yet.
Ive been looking for one, but each one i find i find atleast one comment saying that its bad with the macbook. So i would just like to know a good hard drive that isnt gonna have problems with my mb, oh yeah and a 500 gb one.
View 1 Replies View RelatedI had this MB for over a year now, It was running at a avg temperature of 50 C, but recently it's getting hotter and hotter, now it's running at 70 Celsius constantly if i do not increase the fan speed.
View 3 Replies View RelatedI've got MacBook Unibody 2GHz and if my charge ratio is 1 charge/1 day how long my battery will work - is it countable?
View 1 Replies View RelatedI need the thoughts and advice from your seasoned Mac people - I have 2 MBP's - 1 15" aluminum, one last years model 17" Unibody (with Black around screen). The 15 has run great since day one. The 17" was ok, but now is locking up and causing me to reboot, fans seem to run on high all the time, and it is very slow to react while using the OS, it gets worse until it locks up. I have upgrade to Snow Leopard thinking that that might fix it, but it has not.
When I got it, I restored from the back up of my 15" using carbon copy cloner. I only imported users and data such as pictures and music. Do you guys think that this is a hardware issue or a or should I back all my stuff up and then blow everything away and reinstall from the ground up with a fresh SL install?
When I called apple they tried to sell me apple care and told me that it was out of the full warranty and if I send it I would to pay for what was not under warranty. SO I am hoping that someone has seen this and has a fix that I can do without having to take it in.
After installing lion os on 2008 macbook air soetimes the system hangs and reboot dores not help . I have had to resore from Recovery HD a couple of time
Info:
MacBook Air, Mac OS X (10.7.3)
I have a late 2008 13in. aluminum MacBook with Mac OS X 10.5.8. It used to run extremely well and software would open immediately but within the last 2 weeks software has been taking a long time to load and will sometimes freeze completely(no beachball) and other times the beachball appears. When it freezes without the beach ball it won't start moving again(I have waited for 20 minutes for it to start moving to see if it was just some incredible lag) so the only option is to push the power off button. Around the same time the internet began slowing down to an insane amount when using a browser(I have tried using both Firefox and Safari since this happened, usually I use Firefox.) to the point it takes 30-40 seconds to open a new web page. It isn't the internet as download speeds are the same as they were prior to the slowdown.
Not sure why this happened as I can't recall any big changes, unless it might be VMWare which I installed to run Windows around then(I don't believe the slow down happened immediately after VMWare install) however its rarely running so I'm not sure if that could be it since it isn't in use and doesn't show up on Activity monitor. Just in case it was VMWare, I put it on my external and deleted it from the computer but there has not been a noticeable difference since then.
Misc. info:
* Processor: 2 GHZ Intel Core 2 Duo
* Memory 2 GB 1067 MHZ DDR3
* Free Memory: 62.5 GB
* Number of Cores: 2
* Model Identifier: MacBook5,1
I have tried Disk Utility (Verified & Repaired both permissions and normal), and a program called Onyx which I saw a lot of suggestions to use on the Apple site at times like this and nothing shows up as wrong. CPU usage according to Activity Monitor is normal and with a widget that monitors it, it never really goes above 40% and usually hangs out around 18% so I don't believe its that. I would say it was just age except that it just happened suddenly(it was literally from one day to the next).
There are no odd sounds coming from the machine and temperature is the same as it has always been.
Macbook late 2008 running 10.9.2 runs slowly and freezes frequently in all aps. I've run disc doctor, closed apps, etc, but nothing seems to work.
4GB 1067 MHz DDR3
My 2008 iMac started running very slowly yesterday, taking ages to start up and showing the spinning wheel on the desktop for ages making it impossible to do anything. It particularly doesn't like running iTunes or Spotify and got worse when I plugged my iPod in. Another thing I can think of is I downloaded an album from iTunes yesterday and this seemed to coincide with it having a breakdown. Chrome is also running slow and I get frequent unresponsive script messages.
I'm running OS X 10.5.8 and have upgraded to iTunes 10.6.1. I recently installed the Flashback removal software.
Info:
iMac, Mac OS X (10.5.8)
I have a 2008 MBP with 4gb of RAM. I upgraded via fresh install to Lion and ever since I've had this computer running literally 1/2 the speed it did on Snow Leopard. I've tried Googling and done everything everyone was saying to do but no changes. I also noticed that no matter what I do, when I run disk utility and check permissions it comes back with files that have problems but nothing I do will actually repair them. I'd also like to know if there is any way to turn off the absolutely dumb full screen apps and mission control and launch pad stuff as i'm sure that all the extra graphics requirements has to be hurting my performance a bit. I'm not sure what all the desktop developers have been smoking lately but last I checked a computer was not a phone and trying to mimic the interface is just dumb. There is nothing useful about anything they've done in Lion that I can see. It all looks cool but trying to use it on a daily basis it just stinks. Even the full-screen apps that I though would be cool stinks because it takes longer to swith from one to the other and you loose the top menu while in it which requires extra effort just to see what time it is.
Info:
MBP - 4gb Ram post 2008, Mac OS X (10.6.5)
I just got a Early 2011 Macbook Pro 15" i7 that has a broken scissor for the "x" key (I still have the black "x" key itself. Would the scissors from an late 2007 Macbook Pro 15" be compatible (I've got an old dead keyboard for it that had coffee spilled on it)?
View 1 Replies View RelatedI am trying to set login policies for network users on a 2008 Mac Pro running 10.7.3 and failing miserably. Let me start by saying that I am doing this successfully with 6 other laptops and another Mac Pro (2011 version) with absolutley zero issues. However no matter what I do I cannot seem to get this 2008 Mac Pro to work. The system in question is connected via WiFI (as are some of the other systems). I am using the mac address of the WiFI (as I am on the other systems) and have tried managing this system individually and in a group each of which fail.
View 1 Replies View RelatedI have a Early 2008 Mac Pro running Lion. Its been running well but then last night it froze while I was on the internet. Pretty rare that this happens so I held the power off button and turned it off. Turned it back on and it made the chime noise, apple logo came up, a grey spinning wheel came up for about 30 seconds and then it stopped spinning and the computer froze there.
I tried a bunch of different things. I tried rebooting in safe mode, Recovery mode, From time machine external hard drive, Tried booting in the Windows partition that I have (its on the same as the boot drive I'm trying to boot in Lion off of).
Info:
Mac Pro, Mac OS X (10.6.1), Mac Pro Dual 2.8 GHz Quad Core Processors, 2 GB Ram, NVIDIA GeFo
How do I add memory to my iMac purchased in 2008 currently running Snow Leopard to upgrade to Lion?
Info:
iMac
I accidentally trashed two of my icons on my icon bar I didn't put them in the trash but when I clicked them they turned into wads of trash. I don't know how to find them now?
Info:
MacBook, Mac OS X (10.5.8)
yesterday asked if. should be running out of disk space if my 320 gb has 248 gb of used space. In the using your. Intel based i Mac secttion of this fourm It appears out of space on the HD .can upgrade the HD If so what steps i must take to do so and how much bigger external must buy if 1 tb HD verse a 3 TB and will to buy the external HD before reach over 500gb of used space on the back up I now have.
Info:
iMac, Mac OS X (10.7.4)
Is there really a "Late 2008" model? If so, what is the difference.I ask because I recently got a MacPro and according to Apple's hardware test, it is an Early 2008.
View 5 Replies View RelatedI have a Macbook running Leopard and an iMac running Tiger. I am looking to upgrade Leopard to Snow Leopard and Tiger to Leopard. If I were to purchase Snow Leopard and install it on the Macbook, would I then be able to use the copy of Leopard that came with the Macbook on the iMac? I am not trying to use 2 copies of the same thing on different machines, I just want to put a new os on one machine and move the existing one to another.I am reluctant to purchase the Mac Box Set version of Snow Leopard for the iMac because I do not want or need iLife and iWork.
View 2 Replies View RelatedMy Macbook Pro (from mid-2010) has recently started running EXTREMELY slowly, and the fan continuously runs loudly. From other posts, I have checked my activity monitor to see if any process is taking up a lot of the CPU % and have found that nothing seems high, except the kernel_task which, from what I understand, is supposed to be high. I have also attempted to reset the SMC which didn't fix the problem either. I have taken my computer to the genius bar 3 times now, and they keep telling me nothing is wrong (because it works perfectly there), but when I get it home the fan comes back on, and everything runs slowly.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
