Mac Pro :: (Early 2008) Running Lion, Freezes On Start Up Screen?
Mar 29, 2012
I have a Early 2008 Mac Pro running Lion. Its been running well but then last night it froze while I was on the internet. Pretty rare that this happens so I held the power off button and turned it off. Turned it back on and it made the chime noise, apple logo came up, a grey spinning wheel came up for about 30 seconds and then it stopped spinning and the computer froze there. Â
I tried a bunch of different things. I tried rebooting in safe mode, Recovery mode, From time machine external hard drive, Tried booting in the Windows partition that I have (its on the same as the boot drive I'm trying to boot in Lion off of). Â
Info:
Mac Pro, Mac OS X (10.6.1), Mac Pro Dual 2.8 GHz Quad Core Processors, 2 GB Ram, NVIDIA GeFo
I have a 15 inch early 2008 MBP that the screen will not turn on. When i power on, the hard drive makes a sound that its turning on, but then nothing happens, there is just a black screen. The indication light is on, but again, nothing on the screen. I have tried pulling out the battery, resetting everything i can reset, but still nothing.
I left my laptop on in my room while I went to the bathroom, and when I came out, I saw the message that told me I must restart the computer. The message froze the computer, so I shut it off by holding the power button and tried to turn it back on again, but it only boots to a black screen. I don't hear the loud hard drive noise, but I hear the fans. Without AC power but with the charged battery, the computer shuts down after a few seconds. The light on the button that opens the lid is dim-to-none when the lid is open and bright when the lid is closed.
I tried many troubleshooting methods discussed on this site, like removing and reseating the RAM and draining the battery, along with the things that the Apple website suggested, like resetting the SMC and PRAM, but nothing works.
I brought the computer into an Apple Store, and after the NVIDIA test was negative, the technician told me that the problem is most likely the logic board. I also took the computer into an Apple Authorized Service Provider, and the technician there said it could be the logic board, hard drive, or boot connector. He also said that there is a very slight chance that the graphics card could have caused the logic board to fail. He tried my computer with another battery and concluded that it's not the battery's fault.
The Apple Store is charging me about $330 for a flat-rate repair. Should I troubleshoot further using suggestions you may have or pay Apple for repairs? If I decide to have Apple repair my laptop, do I need to take it back into the store to pay the repair charges, or can I do it over the phone and mail the computer to Apple?
I have a problem: when I restart my Early 2008 MacBook Pro there is no "chime" and the screen remains black. The keyboard doesn't light up or respond to any input, and worse still, the "lid button" light on the front of the notebook remains illuminated, it doesn't blink, it just stays on, shining in my face. I loaded a CD into the optical drive to see if I could use the keyboard to eject it, but this test failed. Now, when I turn on my MBP, I hear the optical drive spinning and the quiet whirr of the fan inside.
I looked on Apple's support website about what to do when a Mac refuses to boot. I tried all of the methods they listed, but since my Mac doesn't respond to keyboard input, all of the techniques failed. Having exhausted everything I could think of, I decided to post here hoping someone could suggest something. I was just on the verge of completing my portfolio website and I would like to salvage my data at least.
I was on the computer when it froze on me then the lines popped up and the computer asked me to restart. When I did that, it just freezes on the start up screen now with the lines across it and will do nothing else.
I have a Macbook Pro, early 2010, 13-inch, which I upgraded to 8GB RAM and a 750GB hard drive. It is currently running OSX Lion (all updates applied) but at times it will just freeze and Lion will not respond. The strange thing is that during this time the mouse still works and I can move the cursor around it is just that the OS does not respond so obviously I cannot click anything to shutdown or restart and all I can do it turn my MBP off and then on again.Â
This is my first post here I hope somone can help me. I have a MBP from 2008 I upgraded to Lion about a month ago and had some minor issues right away, but now I can't get past the boot screen without a kernel panic. I did a time machine restore to one of my external drives and it boots up fine. I figured my internal drive was going bad so I installed a new one yesterday and the exact same Kernel Panic happens. I don't live in a city with an apple store so that isn't an option for me. I am contemplating going all the way back to leopard because the was the last os I can remember that was completely stable for me.
Though the Apple website says its incompatible, can it be installed in some way? If not, then will there be an update for Notification Centre and other new features for Lion?
Is there really a "Late 2008" model? If so, what is the difference.I ask because I recently got a MacPro and according to Apple's hardware test, it is an Early 2008.
Recently my Macbook Pro 2008 is having following problem. First there are wavy blurry lines appears on screen and then it freezes for a while and then it restarts its own. On restarts it gives following message.
Your computer was restarted because of a problem.  Anonymous UUID: 1AC08BAD-9416-4033-A800-666876C27348Â
My MacBook pro freezes at start up at the gray screen with spinning gear. I did a firmware update yesterday and this happened upon restart. MacBook pro purchased new early 2011 lion
After installing lion os on 2008 macbook air soetimes the system hangs and reboot dores not help . I have had to resore from Recovery HD a couple of time
I have a 2008 MBP with 4gb of RAM. I upgraded via fresh install to Lion and ever since I've had this computer running literally 1/2 the speed it did on Snow Leopard. I've tried Googling and done everything everyone was saying to do but no changes. I also noticed that no matter what I do, when I run disk utility and check permissions it comes back with files that have problems but nothing I do will actually repair them. I'd also like to know if there is any way to turn off the absolutely dumb full screen apps and mission control and launch pad stuff as i'm sure that all the extra graphics requirements has to be hurting my performance a bit. I'm not sure what all the desktop developers have been smoking lately but last I checked a computer was not a phone and trying to mimic the interface is just dumb. There is nothing useful about anything they've done in Lion that I can see. It all looks cool but trying to use it on a daily basis it just stinks. Even the full-screen apps that I though would be cool stinks because it takes longer to swith from one to the other and you loose the top menu while in it which requires extra effort just to see what time it is.Â
i have an ibook g4, and was using it just fine the other night, then when i came back to it a few minutes later it had shut off completely. now when i boot up, the computer freezes at the spinning gear startup screen or at the blank blue screen immediately after the spinning gear. it will boot in single user mode, but it won't boot up with my os x install disc. does anyone know any unix i could try to use to get my mac up and running again, or has anyone had this same problem and knows a fix for it?
I want to use FCP 10 on my early 2008 Mac Pro, can I replace my ATI Radeon HD 2600 XT 256 MB with an ATI Radeon HD5770 graphics card to facilitate this?
Info: Mac Pro (Early 2008), Mac OS X (10.7.3), FCP 10
I am trying to set login policies for network users on a 2008 Mac Pro running 10.7.3 and failing miserably.  Let me start by saying that I am doing this successfully with 6 other laptops and another Mac Pro (2011 version) with absolutley zero issues. However no matter what I do I cannot seem to get this 2008 Mac Pro to work. The system in question is connected via WiFI (as are some of the other systems). I am using the mac address of the WiFI (as I am on the other systems) and have tried managing this system individually and in a group each of which fail.Â
I am interested in connecting my early 2008 Mac Pro to my HD TV so that I can easily watch iTunes movies stored on the Mac Pro on the TV.
I know the Mac Pro has DVI video out and the TV has HDMI video in, and that there are adapters between the two. Will this be as easy as connecting my spare DVI port to an open HDMI port?
Well I never thought about this happening anytime soon, but it did. The weird part is that the Windows partition still boots up and works fine. Should I go ahead and replace/upgrade the HD now or just reinstall OSX? I'm kind of thinking about upgrading...
Running a 2.4ghz Intel Core 2 Duo and currently 2gb 667 MHz DDR2 SDRAM. It has 2 slots, whats the max I can put in? What type of RAM do I purchase and who has the best Price on same.
I recently got this Mac Pro (Model number A1186, EMC 2113) with two Quad Core 2.66 GHz Intel Xeon 5150 processors, 16GB of RAM (both RAM riser slots completely filled with 4x2GB sticks of 667MHz DDR2 ECC FB-DIMM each), 2x1TB clean HDDs, and an ATI Radeon HD4870 (512MB DDR5 memory) video card with 2 DVI ports and an S-video port. (I bought the HD4870 later after I found that the one that came with it, an ATI X1900 XT, was part of a recall [sadly this recall ended in 2011.] Plus, the fans on the X1900 were revving up REALLY loud.)The reason I'm posting here is because the darn thing will not "boot." The machine starts up fine (HDDs spin up, lights on the RAM risers illuminate momentarily, etc.), but there is no output out of either of the DVI ports. Not even a gray Apple screen. I have tried the DVI cord and the monitor on two different machines and they both work perfectly fine, and now I have no other Mac available to test the video card on. I'll just have to assume for now that it works. The video card, after the machine is turned on, has three of the four diagnostic LEDs lighted.
The ones that light up are D1601, D1602, and D1603; the other one, D603, does not light up. After some searching around on Google for a little while and sifting through forum after forum, they all seemed to agree upon the fact that these lights were from the two internal power cables (D1602 and D1603) not being plugged in and that there was a critical temperature error (D1601). Note that a) both power cables are in both power slots and hooked in securely and b) these lights turn on immediately after pressing the power button. A light tug from both ends on both cables assures that these cables are not going anywhere soon, and I doubt that there would be such a heating issue as soon as I press the power button, especially since all the fans are running fine. My first thought was that maybe the logic board wasn't getting enough power, but I have no idea on how to check this as almost everything besides the RAM risers and the extension slots are covered by something.Another problem I found is that some of the diagnostic LEDs that should be lighting up, aren't. Out of all the lights, the ones that do light up are the TRICKLE light and the EFI light. I guess it's good that the CPU lights aren't lighting up, but what about the the GPU and POWER lights? Shouldn't those be lighting up too?I also tried booting up from a Snow Leopard disc (there isn't any internal CD/DVD drive [the previous owner removed it for whatever reason], so I've been using an external CD/DVD drive).
When I plugged in my Apple USB keyboard, I decided to press the caps lock key and see if it would light up green. No dice. I tried all 5 USB ports on the machine and none of them worked. But how did the CD/DVD drive work? It spun up when I turned the machine on. So since the keyboard can't be recognized I am unable to boot from a CD, or anything else for that matter.One more issue: there is no startup chime! Tried turning it off and on many different times trying some potential solutions out and not once was there a startup chime. I know for sure this is a huge issue.reconfiguring the RAM (which I inserted per Apple's instructions), resetting the SMC, resetting the PRAM (which wouldn't have worked anyways since the keyboard isn't recognized), and resetting the NVRAM (which, again, probably wouldn't have worked since the keyboard isn't recognized.)So here are my problems.
My 27" iMac, running OS 10.6.8, has started running slowly when loading Apps and when running Safari. Also, when powered, on It has started stopping on the grey screen before the Apple logo displays. To get past this I must turn the Mac off and then back on.
i need to buy a new battery for my MacBook Pro, just wondering if anyone has any experiences of longer lasting batteries?also anyone know any trusted places to buy from that are cheaper than the 99 charge by apple?
My 2008 aluminum MBP 15" is not letting the express card stay in. It won't stay and after search for answers to questions, want to open it and check out the express slot for myself. Done quite a bit of my own work before(Like replacing memory slots), but like to know what something is going to look like before going in.
