A PC on our network is doing printer sharing with a Canon MP530. I can get all the Windows PCs to print off it but I can't get our Mac to do so. Our one Mac user has to unfortunately email everything to someone else to print it for her. Would like to solve that problem.
I already tried downloading and installing drivers for the printer but still don't allow it over the network.
What is the best driver for lion for canon mp530? My scangear goes into rainbow-whirligig action when I try to scan.
Info:
MacBookPro, Mac OS X (10.7.3), canon mp530 printer
I'm using an sr mbp and I'm typing up a lot of notes for a class with mac office. In order to save paper I want to do duplex prints but I can't seem to find the option in page setup. How do I get to this feature?
View 6 Replies View RelatedI have a Macbook Air running Lion. I have been struggling to set up a network printer that has worked for years on Windows and Linux clients (I think it worked with Snow Leopard as well). The set up is a Silex print server C-6200U+ v 2.3.1 with a Canon ip4300 connected to it's USB port. The driver is version 10.51.2.0 and CUPS is version1.5.1. All the latest revs. Currently other clients on the network print using LPR to queue 'lp' on a TCP/IP port. In Windows 7 this is all configurable though the gui with a mouse so I'm not doing anything clever. I have tried a number of iterations of set up on the Mac using CUPS Admin interface and also the System Preferences route. The closest to success has been to set it up as LPD protocol on a fixed ip address with queue 'lp', from this configuration I can successfully print a test page from CUPS or 'Print and Scan'. However when it comes to a 'real' print job from Preview or Word or Adobe, nothing much happens. The print queue says it is 'copying the Print Data' or similar but it just hangs indefinitely.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.1)
Okay, new multifunction. My fiance set up the network, and I can print wirelessly. No problem. He has put it in my hands to set up the scanner function. Problems. When I connect my computer by ethernet cable to the router (also connected to the MX850), everything works as it should. When I disconnect the ethernet, the scanner doesn't recognize my computer, and the computer says that the scanner is not connected. Am I wrong in thinking that the scanner should scan wirelessly?
View 4 Replies View RelatedI am new to Mac. Recently I bought a Macbook Air with OS X v10.7. I have a ADSL router with the Canon printer with fixed IP 192.168.2.100. I have a wireless router connected to the ADSL router. This wirless rouer is in another subnet 192.168.3.0.My Windows 7 notebook I am able to print wirelessly to the Canon using a manual configuration (IP printing). As for the Mac, I have installed the latest Canon CUPS drivers and the Canon IJ Network Tool. I use the Canon IJ Network tool, I am not able to scan for the printer. I configure manually with the IP address such as IPP://192.168.2.100 but it still cannot print. The status of printer goes from idle to busy.
Info:
MacBook Air, Mac OS X (10.7.4)
Brand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?
View 3 Replies View Relatedhow to install Canon Printer MX340 (Wirless connection)
I am using Canon Printer MX340, My Mac OS is 10.7.3. I can't install this printer via home network. Even i install original installer from canon, keep asking me what is printer administrator password.
Info:
MacBook Pro, Mac OS X (10.7.3)
Trying everything from installing ix4000's driver to CUPS driver and so on. The printer works fine when connected to my MacBook Pro but when trying to print on windows xp network.. nothing happens.
Sometimes it says not authorized some time it keeps on trying.
When adding a printer I choose windows and I see it and can add it . The driver is available and everything works fine....But it doesn't print or it seems MBP can't send information to that computer which has the printer. The printer on that computer (XP) is shared .
I have a Dlink DIR-615 router and we all are connected to it. Should I follow a defined procedure or what? Idon't know what to do . I even couldn't print a single page..
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
I am unable to set up our office Canon image Runner 3225 (iR3225) network printer up. I have followed the steps on both the canon, and apple site. I have also tried driver UFR II (2.24), and other drivers as well. I can look at the printer online but it will not locate it in setup no matter what I do.
I am running OS X Lion 10.7.3
My current setup is an AirPort express with a PIXMA iP8500, if I grabbed a LaserJet 1020, could I plug a USB hub in the AirPort Express, and network them both at once?
View 1 Replies View RelatedI can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies View RelatedI'm trying to get my Canon SmartBase MP390 to work with my Mac, and I need to be pointed in the right direction, assuming there is a right direction. Aren't there any open-source Linux drivers or something that I can use?
View 1 Replies View RelatedI've downloaded a driver from Canon, and at someone else's suggetsion, a Canon toolbox, but: My Canon Scanner LIDE 600f won't work on my Mac Lion.
View 2 Replies View RelatedI have a Canon MP460 connected to my iMAC however I am unable to scan. I can print perfectly and would like the scan capability to work. How do I get the scan to work?
Info:
iMac
After upgrading to Maverick on my 2.93 GHz Intel core 2 duo processor with 4 GB memory and a 10.9.4 version for my OS X my canon MG5220 all in one printer scanner shows as MP Navigator EX quits unexpectedly.
Info:
iMac, OS X Mavericks (10.9)
I have downloaded Canon driver 10.51.2.0. I tried Navigator Ex 3.1 . All Apple updates have been run. I tried removing printer and bonjour scanner and reinstalling. All ng. I cannot launch from " Solutions Menu ". Printer does print. If I try and scan from image capture it scans very very slow and is not accurate. I tried connecting with a usb cable and not using the wifi. Still ng.
Info:
iMac, Mac OS X (10.6.8), Canon Mp560 Driver 10.51.2.0
Microsoft Office. Epson Scan, Canon software won't work with Lion OS
Info:
iMovie '11, Mac OS X (10.6.8)
I replaced my hard drive and cant get my canon mp490 printer to work. My timeline backup had old printer drivers but cant seem to find new printer.
Info:
iMac, Mac OS X (10.7.4)
I've bought a network drive to use as a wireless external hard drive with the hope of saving my iTunes library onto it and then streaming it to my MacBook Pro. But it doesn't just work like a hard drive - I can only play music via a 'Shared' icon that comes up in iTunes, and only stream mp3 and WAV apparently. Why can't it just mount like a USB or FireWire drive that I can move stuff onto? Have I made a massive cock-up?
View 9 Replies View RelatedAfter the re install i was unable to get my wireless internet to work. It worked 100% before i had the crash, all other pc's still work wirelessly. Here is a little rundown of my situation.
1. I can connect to my network with a full strength singnal.
2. I can't connect to the internet through the network.
3. I had it working before i had to reinstall my os
4. My dads powerbook, my windows pc, my ipod touch, all work wirelessly still through the network.
I tried to copy setting from the powerbook but it has tiger and im running leopard it does not have the same options. I connect using PPPOE but when using the assistant it will either,
1. keep telling me to reboot the modem (nothing found)
or
2. cant find pppoe host (Im with sympatico - canada DSL)
I have 4 Mac's in my household, 2 MBP's, a Mac Pro ,and a Mac Mini. I can find the Mac Pro and both MBP's on Back to my Mac but the problem is with the Mac Mini.I am able to see any of the computers from the Mac Mini but the Mac Mini won't show up on any of the computers. This would be the case using Back to My Mac and won't even work on the Finder within the home network. The Mac Mini simply won't show up in the Finder.
I have Leopard on the system with the latest updates and have gone through the settings and can't find anything that is turned off.
I've been posting quite a bit lately as to suggestions as to how to speed up my network. Whatever I do, I cannot get to my iMac to connect to my network faster than 5-10 Mbits/sec. If I step 6 inches out of the room with the iMac, I get 70-100 Mbit/sec. I've finally come to the conclusion that there is some type of interference in the room with the iMac and no matter what I try, I'm not going to be able to get good wireless network speeds in that room.
Since the room is on a different level than my wireless router, a direct wired connection from my Time Capsule is out of the question. But, what if I bought an Airport Express, put it right outside the room with the iMac and ran an ethernet cable from the Airport Express directly into my iMac? Would that have any positive effect?
The computer and internet works good when is not connected to my tv. Last weeks, I bought a mini DVI to DVI adapter and then a DVI TO HDMI Adapter, so the problems is when I connect it to the tv. The network doesn't work anymore. Sometimes do but must of the time doesnt work. I just tried openDNS but still the same.
View 2 Replies View RelatedI have an iomega network drive on which I store my itunes library. However spotlight does not find any files on this drive.
I have tried mdutil -i on /Volumes/Network drive and mdutil -E
It says it has turned on indexing, but it still will not find any files. Does anyone know how to make spotlight index this network drive, or recommend an app that will allow me to search network drives
I have an ethernet and a wireless internet connection.
With the wired connection everything works fine but when I use a wireless connection ( I have tried this with two t-mobile wireless networks in germany at my own house and at a friend's house) all the apple aplications won't be able to acces the internet.
As of last tuesday, I haven't been able to get an internet connection using my Time Capsule on the Cox Cable network in Omaha, NE.
At first, Cox told me that this was my problem, and to take it up with Apple. Now they are telling me that no one with Time Capsules has been able to connect to their network for about a week. They say that they are working on it, but it isn't a priority because they "don't support routers."
I am having a problem with at&t uverse internet, I have a new mac pro, and I can't get the Link Aggregate part of my network to work, or just get rid of the firewall completly.
View 1 Replies View RelatedThe program Mail works great for me at home. But, when I take my laptop to my office, or I use it at a coffee shop, or wherever, I can't send emails. It'll access the server and get emails, but I can't send them. My mac email is IMAP, rather than POP, if that makes a difference. Is this something that I should be able to do, or does Mail need to be hooked up to my home network to work properly?
View 2 Replies View RelatedI have brought my work mac book pro home with me to do some work over the weekend, but I have the issue of usually it's connected to a network in work and now that I've got it home it says "Network Accounts Unavailable". When I try to log in the log in wheel just spins for about a minute then shakes as if it's the wrong password. I know I'm using the right password as I used it little over an hour ago in work. Do I have to be connected to the internet? And if so is there a work around so I can connect to the Wifi without logging in? It's not the administrator account on the mac, and I don't have those details, but it's a real pain not to have it over the weekend.
View 1 Replies View Related