Recently I have connected to a local wireless network connection through windows in my bootcamp.
I downloaded a certificate provided to me, installed it, Typed the domain name, username and password and i got connected.
But I don't know how to do the same in my mac OS.
I am running into a headache with my wireless network connections. When I close my laptop to put it to sleep, I often lose my network connection. It is easy enough to reconnect; I simply try to connect to a web page, get network diagnostics, and re-enter my password (and click on the "remember password" box). All works great -- until I next close the laptop. It happens all the time at one site, sometimes at home (using Time Capsule), and seldom at the church where I volunteer.
I have checked all my settings and can't figure out what's going on. If my poor memory is correct, I didn't use to have this problem, but it has been going on for the last couple of months. I know I could keep the sucker open, but I want to save power by putting it to sleep -- and the desk where I work at home has a sliding drawer so it has to be closed to close the drawer. (And my network connections are all in the desk also.) I've posted this question to the Apple forum but haven't gotten any replies there other than a couple of followup questions. I am using Time Capsule as my router and I have updated the software
I've got another thing I wish to figure out. I wish to have my iMac and my mate's Asus eeePC netbook to both connect with one another in a network.
The whole main reason I wish is to share my iTunes music library. So he gets to be able to play the music.
Could I get a few links how to set it up for sharing folders, and for sharing music through iTunes.
I have a macbook 2.4.
I used to connect wirelessly through a router. I can't connect anymore with my macbook, I have a message "connection timeout" when I choose appropriate network and type the code (I tried both WPA and WEP). The thing is I can connect without any issue onto the same network using a pc.
I have also a partition with Windows vista on my macbook but still I can't go online.
Lately I've been using my schools wireless connection, and when I have AirPort on, I noticed that on Share tab, on Finder, I can see anothers PC's and Macs that are using the same wireless, I tried to enter on another mac and I saw some folders and documents, I was logged as a guest! So the question here is: when I'm using AirPort, with the osx firewall, can somebody see my folders like I saw the other?
View 3 Replies View RelatedI bought an Epson C2800N which is a network laser printer. It is connected to my router with "ethernet" cable. I am able to connect to my printer over cable connection (when i have my MPB network connection with "ethernet" cable) but when I use the wireless connection (airport) I can't connect to my printer. It happens with my MBP17 and my bro's MBP15'.
View 5 Replies View RelatedThe college I attend has a wireless network available to students. You don't need a key or anything to join the network, but once you're connected, you need to open a browser that automatically directs you to a website where once you log in, you are granted internet access. Similar to what you get a Starbucks, hotels, airports, etc. This used to work fine, but recently I have had nothing but trouble with it.
I can connect to the network fine, but when I open the browser I cannot get to the page where I need to log in--nothing ever loads and the browser eventually times out. I have tried resetting Safari, using Firefox, turned off pop-up blockers, renewed my DHCP lease, and nothing seems to do anything. I should add that I can complete this process with no issues on my iPhone. Also, I get the same result with 2 different MBP's. Both run Snow Leopard.
I have just bought a macbook, my internet connection at home is wireless however it requires the IP address of each computer using the wireless network to be entered into my wireless account, just an extra security measure. My new macbook has never been connected to the internet as I can not find the IP address I have tried applications/utlities/network utility and there is just a blank space where it says IP address. I have also tried System prefences/network and there is no IP address there either.
View 3 Replies View RelatedAt home I have about four laptops and one desktop computers. All of them use a wireless connection to connect to the internet. Sometimes, one of my siblings is downloading something huge or is downloading torrents or what not and it cripples the speed for the rest of us.
I also can't see if someone has managed to crack my WEP password and is using my connection (a neighbor or someone). Is there freeware that tells me who is connected to my network and how much traffic or data they are using?
Well I'm here at college and my iBook keeps giving me connection errors when trying to connect to the wireless network. It works fine at my house but it only works occasionally here at school. I'm not sure what the problem is but I was wondering if anyone has any ideas of what I could try to fix this issue.
View 2 Replies View RelatedMy Internet has just been upgraded from 2MB/s to 10MB/s. To confirm the upgrade I have used [URL:...] to test my upload/download speeds with Firefox and Safari. I have 2 computers on my network which consists of a cable modem connected to a white airport base station with 128 bit WEP encryption in 802.11 b/g compatible mode. The 2 computers are a dual 2.8 ghz MacPro which is wired directly into the Airport base station by Ethernet and an iMac 1.83 Intel core 2 duo. The much faster MacPro only achieves a download speed of 5.5MB/s over its wired connection while the slower iMac achieves 9.8MB/s - very close to the advertised speed over its wireless connection. These are consistent speeds not one offs so I am wondering why the difference? The MacPro is my main machine so I'd like to have the best speed possible on that. What can I try?
View 2 Replies View RelatedI have five Macs in the house, all of which can see each other on the local wireless network...but...for some weird reason, none but when they try to connect, I get �Connection Failed� after several minutes of silence.
When I click �Connect As...� in hopes of getting a login screen, nothing happens at all. Nada. Zilch. Zip.
The sharing settings on the MacBook are identical to the ones on the other five. Of course, the MacBook can connect the other direction to everyone, including my brand spankin� new MBP.
Any clues, oh wise ones? I�m stumped. What is it about getting into a simple MacBook that has two G4s and two MBPs scratching their heads?
I have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedI am trying to add a network printer on my MAC OS X machine version 10.5.2. I am having a really hard time and need to know it you can > provide me with steps on how to configure my computer so that I can > printer through the network. The printer is a Savin C2525 network printer.
View 5 Replies View RelatedI have an iBook with OS 9.2 and my internet provider doesn't support anything less than OS 10.0. Can someone guide me through the steps of configuring Airport for home wireless use? Alternately, is there a manual somewhere that would provide the necessary info.
View 1 Replies View RelatedI have one of those "new" (well, mine's over a year old now) 13" aluminum-cased MacBooks (what is the official name for these anyways, Intel Core-Duo or something?... I digress). I am using the default/included 'AirPort' wireless thingy.
All I want to know is: How do I ensure that my AirPort is configured properly to access a 5 ghz wireless band? I just setup my wireless router to broadcast at 5 ghz and I want to make sure my MacBook is receiving at 5 ghz/optimal speed. So, what steps do I take to check this and/or configure it as such?
Netgear Router/DSL modem -> USRobotics 5454 WiFi Access Point -> Panel antenna -> 2nd Panel antenna -> 2nd USR 5454 AP -> Apple iMac with built-in WiFi Card
View 2 Replies View RelatedI just bought a Asus WL-167 V3 Wireless Adaptor because my iMac is having some issues.
I installed the software but stil can understand how to configure and use it.
Info:
iMac, Mac OS X (10.7.4)
I recently purchased (as in days ago) a refurbished 13" Macbook Pro. I just noticed today that my wireless connection on my Macbook Pro has been losing it's connection about every other 2-3 minutes. I was on iChat with a buddy this morning, and I must have been disconnected and then reconnected about 8 times in 20 minutes. I first thought it must have been a problem with iChat. That said, I have sat here looking at my screen for the past ten minutes, and I have seen the Airport wireless indicator disconnect and then reconnect again at least three times in the past ten minutes.
I have AT&T U-Verse Service, and I am forced to use their provided 2WIRE router. That said, I have had no problems with any other device that uses the wireless connection, from my iPhone to my PS3. I work from home and have my HP laptop literally sitting right next to my Macbook, and it has not disconnected once from the same wireless connection, whereas my Macbook has literally disconnected at least 20 times.
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting." Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?
Info:
MacBook Pro, Mac OS X (10.6.7)
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info:
MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
My setting on my Imac are messed up and wont allow me to connect to my wireles router. What do i do to get the settings correct?
Info:
iMac
I have a Mac/Windows home network with two airport extreme base stations. One is connected to my dsl modem. The other is used wirelessly to extend the network, and I have a Xerox Phaser 5500 connected to one of its lan ports. Until recently, all computers, connected wirelessly could share the internet connection and print to the Phaser. Due to a power failure, I had to reset both the Airport base stations. I can still connect to the internet, however I can not print from any of the computers.
View 4 Replies View RelatedI have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedOK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
I have a guest account set up on my Airport Extreme. I'm trying to hook up a wireless gaming adapter (xbox) to a Slingbox. It's worked in the past with linksys routers that had no security. When I set up the airport, I set security by default, but I want to remove it from the guest account. I just can't find the way to configure the guest account.
I'm sure is's pretty easy, and just a button I can't find, but if someone could point me in the right direction,
I've searched and don't see anybody else with this problem. I tried to set up an ad hoc network on my MBP so I could use TouchAble with my new iPad. But now I can't get my MBP (or iPad) to see my home wifi network.
(TouchAble is a music performance app on the iPad that controls Ableton Live on the MBP. It works on an ad hoc network so the combo will work on gigs without depending on local wifi.)
I set up a new network ok, with a password. The iPad saw it, but before I tested it further I wanted to make sure I could reinstate my regular network. So I tried switching back to the regular wifi. No dice! The MBP sees the network, but I can't log in. It acts like the password is wrong. Same on the iPad.
Yes, the network works. I didn't make changes to the settings in my router, and my iPhone still sees it with the same password.
I tried a tip I found online and deleted the network preferences file (com.apple.smb.server.plist) and rebooting. No dice. (The system didn't write a new one, as I had expected; I had to reinstate it from the Trash). I rebooted a few times, both MBP and iPad. Nope.
What's going on here? 1) How can I get my MBP to see my network, so I can switch back and forth from the ad hoc to the local network. 2) Ditto for the iPad.
MBP is new. All systems and versions are up to date. No other funny stuff with the network--it's been stable for two years. Everything is stand-alone; this is in my home office. I'm the admin. (But I'm not a techie, so if you start talking about IP addresses and subnet masks, please be clear what I should try.)
