Hardware :: Ethernet Printer On Airport Network Stopped Working - How To Configure

Jan 21, 2010

I have a Mac/Windows home network with two airport extreme base stations. One is connected to my dsl modem. The other is used wirelessly to extend the network, and I have a Xerox Phaser 5500 connected to one of its lan ports. Until recently, all computers, connected wirelessly could share the internet connection and print to the Phaser. Due to a power failure, I had to reset both the Airport base stations. I can still connect to the internet, however I can not print from any of the computers.

View 4 Replies


ADVERTISEMENT

MacBook Pro :: Network Printer Suddenly Stopped Working?

May 11, 2010

I have a network printer setup at my house, and it suddenly stopped working. Here's my setup.

Mac (printing computer): Macbook Pro, 10.6.3.
Router: Generic router.
"Server": Acer netbook running Windows 7 Ultimate
Printer: Samsung CLX-3170 series color laserjet
I use LPD and this is what I type in:

192.168.10.9 (This is the netbook's IP address.The printer's sharename in Windows 7 is CLX3175.This printer was working fine, but it just suddenly stopped working just now. Does anyone have ideas?

View 1 Replies View Related

Software :: Airport Stopped Working - Tried To Reconnect Through Network Settings But It Still Won't Work?

Feb 11, 2010

I've had my macbook pro for 4 years now with out any problems. However, a few weeks ago my airport stopped connecting for no reason. I have tried to reconnect through the network settings but it still won't work. However, if I am in the same room as my router then the airport will connect wirelessly to the internet. But as soon as I leave the room my internet signal will go out. I know its not a problem with my router because all the other computers in my house can recieve signal anywhere in the house.

View 1 Replies View Related

Software :: Cannot Configure Network Printer From MAC OS X

Aug 12, 2008

I am trying to add a network printer on my MAC OS X machine version 10.5.2. I am having a really hard time and need to know it you can > provide me with steps on how to configure my computer so that I can > printer through the network. The printer is a Savin C2525 network printer.

View 5 Replies View Related

OS X :: Connecting Network Printer Via USB Or Ethernet?

Dec 27, 2008

I got my printer connected via usb. Can it be available for the computers that are connected on the same wireless network or I have to connect it via ethernet?

View 3 Replies View Related

Hardware :: Share Printer Through Ethernet Network?

May 17, 2009

This looked like the best place to post this. I have two computers in my home, a 20" iMac with Leopard and a Desktop Dell with XP. There is an usb printer connected to the Dell, but its upstairs. The computers are connected through an ethernet cable. I was wondering if there was a way to print archives from the iMac to the usb printer. What i have been doing is either sharing the files and inserting them to a shared folder on windows xp or sending them to myself via email. I find both processes extremely annoying and boring, and would rather instead just directly send a command to the printer.

View 2 Replies View Related

Mac Mini :: Ethernet Port Seems To Have Stopped Working?

Apr 16, 2010

I've been having an annoying problem lately. The ethernet port on my Mac Mini seems to have stopped working. It happened when I was switching routers. Most likely I just unplugged it from the old router, and into the new one. After that, no more connection, nothing changes when I plug something in.

As far as troubleshooting goes, I've plugged it into other ports, and into my MacBook Air (Just to get a Self assigned IP) and nothing works. I know these ports work with my other computers. I've reset the SMC and PRAM.It works in bootcamp so this makes me think it's not hardware. Any other suggestions?

View 4 Replies View Related

Software :: Ethernet Connection Stopped Working On MacBook

May 2, 2008

The ethernet connection has stopped working on my MacBook. It has worked previously but now says no cable is installed. I have looked at the port and no damage is noted. I tried a known good cable from another system to no avail

View 1 Replies View Related

Intel Mac :: Ethernet And Wireless Suddenly Stopped Working?

May 30, 2012

2009 iMac running Snow Leopard. 

NO issues until this morning.  Put computer to sleep and it would not boot back up properly (stuck on Apple boot screen and it FINALLY came on after many tries).  Now my wifi or ethernet won't actually "connect" to the internet.  It says connected under network preferences and it's green, but I have no internet connection... 

Info:
iMac, Mac OS X (10.6.8)

View 1 Replies View Related

OS X :: Ethernet Jack And Cable Stopped Working - Plugged Capsule

Feb 10, 2009

I usually use an ethernet cable to connect to the internet. I recently bought a time capsule and in trying to set it up i plugged the capsule into the ethernet jack and my ethernet cable stopped working. I connected my computer into the capsule and its not the cable thats broken. I'm currently lost on what to try next, when i connect my computer to the jack, it says "nothing is plugged in" or something like that.

View 1 Replies View Related

OS X :: Using Airport Express With Extend Network - Ethernet

Apr 17, 2009

When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.

I have a Leve1 router as my main, connected to my modem.

My airport express is connected to the network with a CAT5 ethernet cable.

I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->

And then it doenst join my network, but creates a new called Apple Network 00a133..

View 6 Replies View Related

Hardware :: Airport Express,extending Network But No Ethernet?

Apr 19, 2009

I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.

View 8 Replies View Related

OS X :: Network - Comcast - Ethernet - AirPort Express / Extreme?

Jun 21, 2009

I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.

So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?

View 5 Replies View Related

Software :: Network Printing With Airport/Ethernet Combo?

May 30, 2009

I have a Canon printer connected to my G5. My G5 connected to my WiFi router. My MacBook has Airport. I have set the G5 to share the printer but it is not recognized by the MacBook. What am I doing wrong?

View 1 Replies View Related

Hardware :: Setup HP 6500 Wireless Printer Connected To Airport Extreme By Ethernet

Dec 11, 2010

i connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...

View 1 Replies View Related

OS X V10.7 Lion :: HP Printer Stopped Working?

May 30, 2012

I downloaded 10.7.4 tonight and now my HP Inkjet printter/scanner no longer works. I am directed to download the new driver from Apple Software Update but that driver only has a printer driver--nothing for the scanner!

Info:
Mac OS X (10.7.4), HP Officejet 6300 All-In-One

View 1 Replies View Related

Hardware :: Can AirPort Extreme Work Via Cat5 Ethernet Port Within Network?

Dec 11, 2009

Can my AirPort Extreme work via a Cat5 ethernet port within my network? I ask because we've had no luck doing this where as our older Airport Express works just fine this way. Thoughts? We upgraded to the Extreme to extend the signal (and have 2 antennas) and trying to avoid hooking it up to the cable modem box which is even further away than where the Airport Express was located.

View 3 Replies View Related

Hardware :: Joining Two AirPort Extremes By Ethernet To Extend A Wireless Network?

Feb 18, 2010

We recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.

View 1 Replies View Related

Software :: Airport Stopped Working - Says Its Working?

May 29, 2008

I have been connecting wirelessly to the same router for about 4 months now, using DHCP, and having the settings on the automatic connection. I left the computer on, but closed, so sleeping, for about two days. When i opened it, the battery did not yet run out but the internet has not connected since.

I have full connection in internet connect to my network. Status says connected. If I have the IPv4 using DHCP, the status says that i am connected but my computer have a self-assigned IP adress. When I put in the IP manually, the Network setting give me a green light on airport and says that I am connected to the network thru airport. Needless to say, no browsers (Firefox, Safari, Netscape, or Internet Explorer) have been able to connect to the internet.

I have tried running Disk Utility for any errors, but there have been no changes.

Powerbook G4
1.67 GHz PowerPC
512 DDR SDRAM
v. 10.4.11

View 7 Replies View Related

Intel Mac :: OS 10.7.4 Has Suddenly Stopped Printing To Epson CX4800 Printer Through Airport Extreme?

Jul 2, 2012

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.

Info:
iMac, Mac OS X (10.7.4)

View 1 Replies View Related

Hardware :: Just Plug An Airport Express Into Ethernet Point - Second Wifi On Home Network

May 19, 2010

Our wireless router (some standard linksys one) is downstairs. Wireless is mostly used down there so need strongest signal. Then it's plugged into an ethernet point, which goes up to the loft in a box, where it feeds into a 16-port switch, then back out to ethernet points in each room of the house. (recently renovated the house and ran Cat-5e everywhere.)Currently I have to connect via the ethernet point in my room with a network cable as I can't pick up the wireless signal. Which sucks a bit, being tied down when on a macbook pro.Could I just plug an Airport Express into the ethernet point in my room and set it up as a second wireless point, which I can use in my room? Or is that not what it's for?

View 3 Replies View Related

OS X :: Connection To The Printer Stopped Working - Password Needed?

Sep 6, 2010

My daughter has a MacBook with OS X 10.4.11. Due to its age & configuration, the OS X can't be updated any further.

Her MacBook is networked through my iMac (OS X 10.6.4) and is setup to print via my printer.

The connection to the printer stopped working, I tried to troubleshoot it, but needed the admin password. She didn't know if she had one so I used the installation disk to change eliminate the need for one. But for some things I'm asked for the keychain password, she doesn't remember if she has one.

According to the keychain help, the keychain password should automatically be the same as the admin or login password. There isn't a login password anymore, and keychain isn't accepting a blank password,so I'm locked out of some functions requiring the keychain.

I created a new keychain, but when online, I get a lot of unverified certificate errors. I try to change them individually to accept them, but I'm asked for the keychain password. If I can access the old keychain, is there a way to copy all of its certificates to the new keychain?

I can't figure out how to change the keychain password for the old keychain as without it, I can't accept certificates even with the new keychain. I'm really stuck.

View 1 Replies View Related

Hardware :: AirPort And Ethernet Not Working Together Anymore?

Mar 11, 2009

I have shared my internet connection to my PC via ethernet many times (so my PC get the internet connection from a ethernet cable plugged into my MacBook which shares it's connection via AirPort).

Now suddenly it doesn't work, when I plug in the ethernet cable to my MacBook the internet connection dies whenever the ethernet connection starts working... I'm still connected to the wireless network, but can't use internet...

So the connection to internet dies whenever I try to share it to my PC from my Mac... Anybody know how to fix this?

View 1 Replies View Related

OS X :: Network Printers Suddenly Stopped Working

Nov 24, 2009

I have a network with an Airport Extreme Base Station. I have two Macs connected by ethernet and an Iomega MiniMax hard drive connected to the base station by USB port. I have been running two printers, an HP Laserjet 1012 and Samsung CLP-315, connected by USB cables to the MiniMax hub. This setup has been running fine for several months. Yesterday, with no change in cabling, the printers stopped working. If I try to print to either printer, I get a message saying, "looking for printer..." If I connect either printer directly to the base station, I get the same message. If I connect the printers directly to either computer by USB cable, they both print fine. What can I do to get my original setup back working? I have tried restarting all the various components and reconnecting all the cables. I have checked to make sure I have the latest drivers for the printers.

View 3 Replies View Related

Hardware :: Airport Extreme And Network Printer

Dec 11, 2010

I recently replaced my aging linksys G router with an Airport extreme. I have an HP 2605dn printer connected to it via ethernet. When I set this up with the old router everything worked great, printer showed up in OSX and added with a couple of clicks. Now that I have moved to the airport I cannot find the printer at all from OSX on either my MacBook Pro with 10.6 or my Powerbook with 10.5. However all of the Windows 7 machines I have in the house see it and print fine. I feel like I'm missing something very simple and help would be amazing.

View 6 Replies View Related

Hardware :: Sharing Network Printer Via AirPort Express?

Jan 25, 2010

After a surge fried my beloved HP LaserJet 1320, I purchased an HP LaserJet P2055dn. This has a built-in print server, to my understanding, with an Ethernet port that would be available for me to connect to a router. I would ideally like to share this printer between my MacBook and another computer (an HP notebook PC running Vista). What's the best idea here? Please bear in mind one thing: the HP notebook has flaky wireless, so it might have to use an Ethernet cable at some point--thus I'd like to explore all of the feasible options.

1. USB to my computer and set up printer sharing?
2. Ethernet to my computer and set up printer sharing? (Does that make any sense? Maybe not!)
3. Get a wired router and, while the computer is on my desk, connect it to the printer and to the connected computers.
4. Get an AirPort Express and connect the printer up to the USB port. Now, we're using WPA2 on our wireless network here, and I thought I read somewhere that one cannot extend a wireless network that's WPA2. Can I hook up a printer to an Express that's a client?
5. One idea that especially intrigued me: Get an AirPort Express and connect the printer up to the Ethernet port, then set up network printing on all connected computers, rather than Bonjour printing. Again, network-extending question still applies--I'm really clueless here.

Since I *have* a network printer, would network printing (i.e., option 5) be faster/better/more efficient than Bonjour printing? Less software or drivers to install? or more?

View 6 Replies View Related

Hardware :: Wireless Printer Can Be Connected To Airport Express Network?

Sep 12, 2010

Question: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?

View 4 Replies View Related

PowerPC :: Airport Card Connection Suddenly Stopped Working

Oct 12, 2007

Last week, my airport connection suddenly stopped working (and I mean JUST as I was working on it, it started failing). It would connect to the network fine, but it could not communicate with the router through DHCP and even with a static IP, it could not transfer any network data. I put in my brother's working airport card, and it worked, so I ordered a refurbished airport card from ifixit.com. I put that in today, and it is showing the same symptoms of my old card. I don't have my brother's PowerBook to test his card again, so I don't know what to do.

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Connect A Wireless-capable Printer To Airport Network?

Apr 8, 2012

Lexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....

Info:
MacBook Air, Mac OS X (10.7.3)

View 1 Replies View Related

Software :: Printer Not Working Via Airport Extreme?

Oct 13, 2008

I have a MacBook now running Leopard 10.5.5 and an Epson Stylus DX4400 printer. Since I installed Leopard I cannot print via the USB connection from my Airport Extreme. I can print only if the printer is connected directly to my MacBook. This used to work fine when my computer had Tiger. I have spent hours trying to fix this with a 2nd tier tech guy at Applecare, but without success. Epson refuse to help on the grounds that routers aren't supported, or something. The printer appears to be recognised by the Extreme but when I print, the job does not appear in the print box which just says "printer ready" .

I have had to previously UNINSTALL the latest firmware version for the Airport Extreme (7.3.2) because this firmware seemed to be causing previous problems - namely my MacBook not working with Airport at all, or at least only intermittently. Leopard was installed in attempt to solve this first problem - it didn't at first, but seems to be OK now. The printer issue arose only after Leopard was installed. When I add the printer when located at Airport Extreme via System Prefs Print and Fax, it appears to find and add it OK, and indeed the printer is there with 'Airport Extreme' as the location.

I would be so grateful for any suggestions. Both Applecare and Epson have run out of ideas.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved