Intel Mac :: Reinstall OS X After The Hard Drive Has Been Replaced?
Jun 22, 2012
How do I reinstall Mac OS X after the hard drive has been replaced? I had an authorized Apple repair facility replace the hard drive on my IMac when the original drive died. I have the Mac OS X Install DVD which says "To start up from Mac OS X, hold down the C key as the computer starts up." I've tried that and all I get is a folder icon with a question mark on it. I'm guessing that's because I don't have the the OS installed to start from. How do I get the OS X installed?
Info:
iMac, Mac OS X (10.5.6), dead hard drive replaced
Last week the hard drive crashed (or so I assumed) on my late 2009 13" Mac-book Pro.I was getting the blinking folder icon at startup. After trying to boot in safe mode and several other start-up options, I booted from an OSX install disk and found that the drive wasn't appearing in the Disk Utility - this, and the fact that I had been running it at very high capacity for far too long is what led me to assume it was utterly dead.So I ordered a new drive, a WD Scorpio Blue 500GB, and installed it today. Again booting from the OSX install disk, I went to the disk utility (thinking I would format the drive before installing the OS), but new drive wasn't there either.Assuming I installed the new drive correctly (it was pretty straightforward), this is leading me to assume that I was wrong with my diagnosis.
After replacing the first one due to a surprisingly noisy hard drive, and the replacement itself being returned due to having a massive hardware failure, I'm still not using the iMac I ordered over a month ago. Funny thing is, the second iMac had the same rumbling hard drive as the first which I was prepared to put up with. With no more than a few days of usage, it just stopped working. It's been over a week since the second was returned and the new one hasn't been shipped!
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
I upgraded my hard drive from a 500 GB hard drive to a 1TB hard drive in my MacBook Pro, I reinstalled Lion and restored the data from the other hard drive. Now when I try to login to my account, it's as though my password is incorrect. I'm certain it's correct.
How do I use my Apple ID to reset my password? How do I access my account?
Info: MacBook Pro, Mac OS X (10.7.2), Mid 2010 model
It's running the drive, but nothing happens. Replaced hard drive and laptop will not boot up. I've changed it before so I know I've installed it correctly.
I just replaced my hard drive today. I booted it up and went to disk utilities to format it and all of that. When I finished I went to restore system from back up and plugged in my external hard drive and the computer said there was no history of back up from Time Machine. This was strange because before I formated the hard drive and tried to restore the information, it recognized that there was back up information. I decided I would re-install the os and try again.
About a week ago, my MacBook Pro started freezing and getting the spinning wheel. When this happens, the computer is unresponsive. So, I will turn it off and on reboot, but all I get is the question mark folder. The weird thing is that sometime it will boot right up, but sometimes it wont. Even when it does boot, it only works for about 5 minutes, and then the spinning wheel occurs again. So, I bought a new hard drive, installed it and reinstalled the operating system.
I have a 500GB time capsule that quickly ran out of space with my 27" iMac 1TB drive. I wanted to buy a Guardian MAXimus 1.5TB Raid-1 Hard Drive for $360 to do my backups. The cost was high and I decided to look into replacing the Time Capsule drive. I bought a 2TB Western Digital Green internal drive for $130 and replaced it using the Hardmac instructions. The 2TB Green drive runs near silent and is a lot cooler than the original 500GB drive. The swap was easy to do, but I destroyed the rubber mat glued on the bottom. I bought a Rosewill enclosure for $23 for the 500GB drive. I considered buying a FW800 enclosure, but that was $60 and it didn't seem worth it for a back up drive.
On Sunday night I found my macbook pro ("13, mid 2010, refurbished) in a frozen state a few seconds after waking it from sleep. So I did a forced restart and then my macbook wouldn't boot (blinking question mark folder). I troubleshooted with the OSX Install DVD on my own before taking it to the Genius Bar (disk utility & TDM could not find the hard drive), and we both came to the conclusion that I should install a new drive. So yesterday I bought a new drive, did a fresh OSX install and managed to migrate all of my info from my presumed damaged drive to the new one. Everything went smoothly and the computer was in working order all night. That is until this morning when I shut it down before bringing it to work. On my lunch break I decided to fire up my newly upgraded macbook only to find that it once again would not boot, still with the blinking question mark folder. I also tested to see if I have faulty RAM and it doesn't look like it (unless both sticks are fried).
Im planing on buying a 27" iMac with the quad i7. I was wondering if it would be possible to replaced the superdrive with an intel ssd for the operating system. Has anybody done this yet on a previous generation imac and how did it work out.
im ordering my MBP 17" i7 online and im at the hard drive step that being said, if i get a normal hdd and when i get it and put a new SSD inside do i have to re-install the os? and does the disk come with it?
basically if i put the sdd in is it plug-n-play or do i need to re-install everything and buy a fresh mac osx disc?
but I have a Mac Pro 2008 that when I verify disk, I get an error saying I need to start up from the OS X install disc and run disk utility on it to fix errors. I've done that, it says it fixes errors, but back in the OS, it will give me same error again and say I need to run disk utility from the install disc.
So, my question is, I can reinstall the OS from my Snow Leopard disc, but I really don't want to... it's my freelance machine and I don't want to have to reinstall all of my applications (that can take years to install all discs, updates and media), scripts, plug-ins, media archives, etc.
Any advice on a way to fix disk errors like this without having to go back to all your install discs? I'm at work now so I can't remember the exact disk error, but I can post tonight if this can better direct me to a specific program/procedure that might help. I also haven't tried verifying disk from another admin account... which I can also try... just figured it seemed like a system-wide problem.
I have never had this problem before: I deleted Bootcamp partition. Repaired my hard disk and then erased my hard drive. Now I am trying to reinstall Snow Leopard and after the install starts it says: 35 minutes remaining" for about 5 minutes. Then it goes to a screen that says: "Install Failed: Mac OSX could not be installed on your computer. The Installer could not copy the necessary support files. Click Restart to restart your computer and try installing again." I tried restarting and installing and I get the exact same situation. I am not sure what is going on here. This MBP is less than 6 months old and this is the 1st time I have tried a reinstall on this particular machine.
My MacBook does not start. Have Failed all suggested methods. I decided to reinstall Mac OS X, but my laptop does not like the installation dvd, which was scratched badly. I have the Mac OS X image file, but do not have a super drive to burn double layer dvd. With a functioning PC, a iPod touch and thumb drives. Can anyone tell me a method to reinstall the system to my MacBook.
Just got a Macbook from a friend of mine and I wanted to reinstall OSX and delete everything else on the hard drive at the same time. How can i do that?
I just upgraded my Macbook to a 500GB Hitachi hard drive. How do I reinstall Mac OSX Leopard? Does the reinstall disk that came with Mac have all necessary drivers to have Mac operating normally?
A friend brought his new 15" Macbook Pro to me after trying to install Boot Camp and Windows XP. He said that he made a second partition for Windows; however, the drive showed only one partition formatted with NTFS. I tried reinstalling mac os using the disk that came with the laptop. When it came time to choose the destination drive, none showed up. I then went to Disk Utility. The drive and the volume showed up in the left panel but I could not Erase or do anything else - all the options were grayed out. With no firewire port I am also unable to use target mode.
My hard drive crashed and i ended up replacing it. I had downloaded LION OS from the app store and know i would like to re-install on my new hard drive.
I had to reformat my hard drive due to some bug I had. I don't have Apple hardware, but did have Quicktime (Pro?)- the version where you can create a .mov. I have forgotten how to download the software, and don't have an installment disk.
I have been having awesome experience using OS X and Xp at the same time! But lately when I try to run the games on VMware... its starting to lack in graphics and memory. So, I was thinking of installing bootcamp. My first question is will I have stuff that I have installed in VMware Xp in Xp installed on Bootcamp? Secondly, if bootcamp is partitioning the HD then is that mean when I want to reinstall the OS X and wipe the HD will I only have the part that had OS X? Sorry I am pretty new to Mac and I never was brave enough to install xp on Bootcamp xD.
I am going to be selling my iMac, and I want to know something. If I securely empty the trash for all my files, is it necessary to use 7 or 35 pass when wiping the hard drive?
I'm selling my old Powerbook G4. Before I let it go, I want to wipe the hard drive and reinstall OS 10.4. I also would like to run disk first aid because I suspect there may be some corruption. The problem: I still have the original system install DVDs that came with the laptop, but the DVD drive no longer works. It just spins the disks for a bit then spits them back out. I do have an external USB hard drive with plenty of free space. Is there a way I can copy the install DVDs (there's a Disc 1 and Disc 2) to the external hard drive, then boot from that drive and treat it like I'm installing from the DVDs? I also have my new MacBook Pro with a working DVD drive. Can I make my Powerbook boot from a CD in the MacBook's drive? If not, how else can I wipe my system and reinstall the OS without a working DVD drive?
After backing up my data and then swiping my hard drive using Disk Utility, my OS seems to have been uninstalled as well. Is there a way to recover the deleted information and go back to the last working configuration? I'm on a MBP IC2D 2.16 w/ Lion.
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'. I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Wondering if anyone knows what the security policy and process is that is followed by Apple when a damaged hard disk is replaced by Apple. Is the disk destroyed, or demagnetized. How do we know that the data on the disk is will not be accessed and copied anywhere? Is there a stated policy document available somewhere in the Apple Store that discusses this?
I am looking into buying a unibody macbook that has a solid state drive from someone. I was wondering if the drive can be replaced with a SATA drive. It has a 128Gig drive in it and just wanted to know if I had to shell out a boatload of cash to upgrade to a larger drive.
I have a 1.8 core duo macbook, which previously had a CD-RW drive that stopped reading audio CDs, so I had it replaced under my warranty at John Lewis. It was replaced with a MATSHITA DVD-R UJ-857 and I got it back yesterday, so I was pretty happy that I can now burn DVDs. Only problem is, I just found out that I can't burn CDs with this new drive!
Been searching but nothing specifically addressing this issue. I can put in DVD's and music cd's but a blank CD-R is just not recognized. Just had this superdrive replaced 6 weeks ago.
