I have a older mac mini and a 6 month old macbook pro, the mini's hard drive is full, can I take the one from the mbp, wipe it, and put it in the mini and get a larger one for the mbp? If so are there any recommendations for a HD larger then 500GB for my mbp?
View 1 Repliesi have two exact same 17 inch MBPs i am thinking on selling one , one has a lot of stickers and marks on it and the data on that is not at all important (i can format the hard drive no problem). the other one body has very clean and data on that is important lots and lots of photos and videos. i want to sell the one which has clean body so i can get better $ for it. it is possible to just swap hard drives between these two identical MBPs and sell ? would that make any different in performance and also the serial number on ABOUT THIS MAC is that written on hard drive or some place else?
View 8 Replies View RelatedI have a 1tb, 5,400rpm harddrive on my old laptop (mid 2009) and wish to transfer it for the one in my new 15" Macbook Pro, 750gb 5,400.(Mid 2012)
What steps are needed to make this successful?
Info:
MacBook
Pro, Mac OS X (10.7.4)
I have a 15" MBP with 256ssd installed and a 13" MBP with a 250gb 5400 drive. I prefer to use the 13" as my main computer and want to take the 256ssd drive from the 15" and put it in the 13". Then take the 250gb drive from the 13" and put it in the 15" How hard is this to do? I've not done something like this before. Since I'm swapping an ssd with a regular hd is it as easy as following the instructions on this forum, remove the screws and swap the drives? After that's done I'll need to overwrite the 15" software and load the OS and drivers for the 13" on to the ssd drive. Is that as simple as taking the restore disk for the 13" put it in the drive and reinstall the OS? Or, should I just take it to the local authorized Apple Dealer and have them do it? (We don't have an Apple store nearby.
View 4 Replies View RelatedI have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
View 6 Replies View RelatedI would have thought, given the pace of innovation, that we might have had hard drives larger than 1 TB by now. Has anyone heard of any potential rumors?
View 24 Replies View RelatedI have an older iMac (20" Mid-2007, 2.4GHZ Core 2 Duo), and I'm running out of hard drive space on the internal HD. I'd rather replace the HD than whole computer (and external hard drives are a pain because I have not managed to get Time Machine to back them up properly). any recommendations of larger (i.e., 3TB or 4TB) hard drives that will work well as a replacement *internal* drive for this iMac?
Info:
Mac OS X (10.7.4)
I have a 1st generation Mac Pro, 3gHz, 4GB RAM. I'm looking to get another hard drive in the machine, 500GB. I was looking at macsales.com, and I have a preference toward Seagate with my background. Unfortunately, I don't know much about the subtle difference in speed or performance with newer drives (ES-2 Enterprise-Class, for example). I was looking at a couple on there:
500GB Seagate Barracuda 7200.11 SATA II 7200RPM 32MB Cache - 5yr Seagate Warranty
500GB Seagate Barracuda ES-2 Enterprise-Class SATA II 7200RPM Hard Drive with 32MB Cache
Do you have any recommendations for me? Obviously, speed and it being quiet are my top preferences.
I would like to always have one external hard drive attached to my iMac for Time Machine backups, and another external hard drive off site - periodically swapping the two. The though is that if there is fire or theft, it won't help to have a hard drive onsite attached to the computer, because both the iMac and the hard drive could be lost. Is Time Machine smart enough to allow me to configure two drives, so that whenever I plug in one of the drives, it can figure out what needs to be backed up?
Info:
27' iMac i7 Quad-Core, Mac OS X (10.6.2)
I just got a mac mini and was wondering if it's possible to just take the hard drive out of my macbook and install it in the mac mini and then boot up. Will it work? Or do I have to set it all up again? The reason I want to do this is because the mac mini has a 320 GB HD and my macbook 500GB, so I want the bigger drive in the mac mini. But, I don't have a "transitional" hard drive to throw everything onto before I wipe the macbook hard drive and install it in the mac mini.
View 2 Replies View RelatedI'm thinking about purchasing a used MacBook Pro that has a bad DVD drive. I have a PowerBook G4 that the logic board went out on and I was thinking I could put my PowerBook drive in the MacBook. Does anyone know if this will work? The look so similar, but I'm not sure.
View 1 Replies View RelatedI have a Mac Book Pro core duo with a partition running windowsXP pro. The hard drive is almost completely full. I want to replace the drive with a larger drive and clone the current drive. Is there a way to completely clone the drive complete with the partition, boot camp, windows etc? I'm running mac os 10.4.11
View 3 Replies View RelatedI just got my 500 Gb HD in the mail and want to swap my hard drives while keeping all of my data. Does time machine work like this? Can i back my 120Gb HD up and then install my 500Gb HD and then put my files back on?
Info:
Mac OS X (10.6.8)
Where are the larger faster WD drives? The 1TB 5200rpm drive has been out for several months, in the garbage MyPassport configuration. What is the holdup to releasing these as bare drives? Also, isn't there supposed to be a WD 640gb 7200rpm drive? It seem like 2.5" drive tech and/or distribution is really lagging.
View 3 Replies View RelatedI know the hard drives are swappable between computers (providing it has the same interface). My question though relates to formatted OS drives however. I have two Mac Pro's (MacPro1,1 and MacPro3,1). Can I swap the drives between them without losing software or reformatting? The reason I ask is with Windows, it seems to build the system around a specific motherboard configuration. Were you to replace the motherboard in that system, Windows will crash on bootup due to different kernel level drivers on the hard drive.
The reason I'm asking is because I like the way I have everything setup on my MacPro1,1, but want to get the speed boost from the MacPro3,1. Will this work or will I require a clean format of both drives when I swap them.
Been trying to figure this one out, but can't seem to find a clearcut answer. Here's the dilemma: My 2 1/2 year old MP got replaced under AppleCare by my local Apple store with a new Nehalem MP when they couldn't fix it. The 3 user installed drives in my old MP were good, so they moved them from my old MP to my new one. One of those was the boot drive in my old MP, so the Apple store tech made it the boot drive in my new one. I had the drives arranged in order on my old MP (being the anal engineer that I am), however now my old boot drive is in bay 4, the newer MP boot drive is in bay 2, etc., i.e. all mixed up. Being that the old drives were almost 3 years old I decided to clone my old boot drive to the newer one and make it the startup drive, assuming that it being newer it would be more reliable long term. That all went fine.
Now I know that the OS doesn't care in which bay what drive is but does Time Machine? If I swap around the bays to put my boot drive into bay 1 from bay 2 will that confuse Time Machine and make it backup everything again, i.e. wasting backup space??? I.e., does TM go off of physical name and location or does it go off of logical name?? I know it doesn't matter which drive is where, but I just like having things in a certain order to troubleshooting purposes just in case.
I added a second harddrive to my Mac Pro. As it happens, it is larger than the primary harddrive. What I would like to do is use the larger harddrive as my Mac OS disk, while using boot camp to set the smaller one up with windows. when I set up the larger one with 10.6, do I have to use the install disks, or can I just copy all of the files from the old disk to the new? Are there any hidden files that I need that might get left behind?
View 1 Replies View RelatedI'm about to configure my 2006 MP with one of Apple's RAID cards using RAID5. I currently have 4x 750GB drives that I can use, but I can see needing more space in the not too distant future. When I do need more space, can I simply drop in a 2TB drive, let the RAID system reconfigure itself, and repeat this until I have all 4 drives in place? Is there a better or different way to do this? I know that if one of the drives is larger than the others, then only a drive space equivalent to the smaller drives will be used in RAID5. After addition of the fourth drive (per the above scheme), will the array then use the full 2TB of each drive?
View 7 Replies View RelatedSometime I plug and unplug hard drives of my PC while it is on. Will there be a problem to do that on the Mac Pro? If the computer supports this, do I need an internal drive that is also hot-swappable in order to be safe?
View 9 Replies View RelatedCan I put my macbbook hard drive in a new to me used Macbook Pro, both running SL and have the Pro work like the MB? Don't want to migrate, etc.
View 1 Replies View RelatedIt's been well documented in these forums that the 1TB drives make a lot of noise in the new iMacs. Can people with the 500GB drives let us know if they are silent like the old iMacs were? I need a silent iMac and are ready to buy IF the drives are quiet.
View 7 Replies View RelatedIf I swap my hard drive from an old macbook (with ilife 08) into a new macbook, can I use the new macbook's OS discs to upgrade to ilife 09?
View 4 Replies View RelatedI have a 13" MacBook, and I'm swapping out the factory-installed 120 GB hard drive for a 320 GB one. I have been using it with the 120 GB disk, and I want to make a copy of it on the larger disk before I swap them. I have a fairly good idea of what to do, but I don't want to risk losing data, so I want to check and see what the best way to do this would be.Here's what I was thinking: along with the new drive, I bought an external enclosure. So, I was going to put the new disk in there, connect it to the computer with the original disk, and copy a clone of the internal disk to it. I was thinking of using Disk Utility or Carbon Copy Cloner to do this (although I have never done that, so I'd appreciate it if you could walk me through making a bootable clone with either one). Then, once I essentially have two disks which are clones, I'll swap out the old disk for the new one (I know how to do the physical installation).
View 3 Replies View RelatedMy MBP has a 320GB harddrive with like 240GB used on it but I only have two 250 GB harddrives so you can see the problem I'm in. I would like to combine into a single virtual drive so that it can accommodate my Time Machine backups.
View 4 Replies View RelatedI just purchased a Western Digital Scorpio Blue 640GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive to replace my stock 120GB HD. I am really excited to have the extra space. I purchased this MBP a few months ago and would like to do a fresh install of Leopard. I have an external hard drive that I have not used yet and was wondering of the best way to install Leopard on the hard drive and then add my itunes library and iphoto library to the fresh 640gb hard drive. What kind of score do you imagine I will have once I upgrade the hard drive and bump the Ram to 4GB.
View 2 Replies View RelatedI plan to upgrade my hard drive from 320 gb to 750 gb. I have a macbook pro 13 inch laptop which I purchased last October. Can I just do a fresh install of osx lion on the new hard drive? Do you guys recommend hard drives from Western Digital or Samsung?
Info:MacBookPro, Mac OS X (10.7.2)
I have a 2011 macbook that has a motherboard that is broken, and that macbook has a terabyte Hard drive that was put in about a year ago after a broken hard drive was removed. Now I have bought a brand new macbook same model and I was advised by the apple store to take the old TB hard drive and swap it with the one in the new computer. I just want to know if by doing this I'm going to loose all of my files and programs by just swapping them. I have no back up anywhere just the files on the hard drive in the broken computer. So am I going to loose all of the files on the hard drive when I swap it? or will I have to get it backed up some how? They are both running Mavericks
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have purchase a new hard drive for my MacBook Pro Intel 2 Core duo and know how to do it, but once it is installed in the machine, I want to know how to install the operating system. The computer now is almost empty (only a few photos I have backed up) so there is no need to transfer any data. Do I just use the discs that came with it? Please tell me how I restore the system with this new hard drive.
View 8 Replies View RelatediBook, G4 12", 1.2 GHz
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
I'm thinking about getting a bigger internal HD for my 15 inch macbook pro. Currently 250GB, want 750gb. I have Macbook Pro 15 inch unibody A1286. Will it fit? And will there be more heat coming from a larger drive? If so is it advisable to avoid a larger drive because of heat issues?
View 2 Replies View Related