I just purchased a used MAcBook Air 2,1 however it did not have a hard drive in it. I purchased a Solid State replacement drive (Mercury Aura Pro MBA), however I cannot get it install Snow Leopard (Legal copy with a license). I get all the way through the install (Country, etc), but when it asks me where to install the SSD does not show as an option only the drive that has the DVD in it.
Info:
MacBook Air, Mac OS X (10.6)
My wife's MacBook no longer recognizes its built-in hard drive. When I do a cold restart it simply gives a folder icon with a question mark. I can boot into an external disk drive (10.5) but Disk Utility and the demo version of Drive Genius does not recognize any internal hard drive.
Specs
MacBook 2 Ghz Intel Core Duo, 1 GB 667 Mhz, running 10.4.x (latest update).
iBook, G4 12", 1.2 GHz
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
I just put in a 320gb 7.2K HD to replace my MacBook's 120GB. I'm wondering how to check the load and unload cycles of the new hard drive?
Also, I've got all my stuff on my 120GB drive while the new 320 is in my MacBook with a fresh install of Snow Leopard. I've got a hard drive dock that connects via USB. Can I somehow get all my files off of the 120gb drive without switching the drives out?
videos from web sites do not load or load slowly spins
View 1 Replies View Relatedmy white macbooks hard drive broke along with my cd drive. I purchased a new hard drive and put it in but now I have no way to install Leopard since my cd drive is broke.I do understand the best way would be to buy an external CD drive and use that but I would rather not waste all that money on one use.I do have a firewire cable and my friend has a white macbook. I've heard that you can boot using another computer and use there cd drive via firewire by holding "T" or whatever.
View 4 Replies View Relatedhow do i reformat the hard drive on my macBook Pro 10.5.8 - dvd player doesn't work - otherwise what is the best way to delete stuff off the hd I want to keep the os on it.
Info:
MacBook Pro, Mac OS X (10.5.8)
I think I'm going to format my hard drive to delete everything from it and start fresh with leopard. I already have leopard installed, but I think I should just format my hard drive (after backing up what I truly need like my music and other files) and then just install leopard.
Question, I have read that I go to disk utility to do this (format and install leopard), is this correct? If so, what else do I need to know before I do this?
"In addition, it is possible to completely erase a hard drive and install Snow Leopard without a pre-existing operating system in place, enabling users to bypass the possible headaches of an upgrade and go with a clean install instead."
I'm a newbie here but wonder if the above AppleInsider statement is true. I installed Snow Leopard over my existing Leopard w/out a hitch. Earlier OS X retail DVD versions clearly distinguished between "Install" and "Upgrade" - correct?. I'm confused where I read Snow Leopard required an existing OS (Leopard or Tiger) to install. It appears Snow Leopard is a "full install" DVD?
I have a Macbook pro 17" 2008 model, and I just bought a new 160gb Intel X-25m solid state hard drive. I installed it into the mac with no problem, but when I boot up with the OS boot disc 1, the drive doesn't show up in the "destination" screen. No drives are there. When I open Disk Utility the drive is there, and shown as read/write, but when I boot with option held down the drive isn't there either. I can't even do any repairs on the drive in the disk utility.
View 4 Replies View RelatedHow to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion?I would like to use the external on a permanant basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Info:
MacBook Pro (13-inch Late 2011)
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible? and easiest.
Info:
MacBook Pro (13-inch Late 2011)
Clearly there must be a way to do this, right? Can I install off an external hard drive? Off a USB drive? Share my macbook pro's DVD drive somehow? If the hard drive on the mac mini is completely reformatted and I plug it into the USB port on the external hard drive which I partition and install the Leopard DMG would it be able to boot off of it?
View 9 Replies View RelatedHow to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion? Any hints on where to start? I would like to use the external on a permanent basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
i want to turn off disable my internal hard drive.Â
1.) macbook pro 1.83ghz
2.) OSX 10.6Â
i know how to remove the drive physically, that is not my question. the drive makes too much noise while i am recording in imovie. i am sure there must be a simple command line in the terminalÂ
Info:
MacBook Pro, Mac OS X (10.6.6)
I would like to migrate my computer data from my current Macbook (late 2007) running Snow Leopard to a slightly newer Macbook (mid 2009) running Mavericks. While doing this I will need to implant the wiped hard drive from my current Macbook (late 2007) into the target Macbook (mid 2009) in order to have enough hard disk space for my personal data. I will then conceivably need to install OS X Snow Leopard onto the disk, since my personal data is from Snow Leopard. While I have all of the personal data from my current Macbook (late 2007) backed up on time machine, I do not have an OS X Snow Leopard CD-ROM which I imagine to be required when trying to re-image a disk from a Snow Leopard time machine backup.
So, my questions are, first, will the target Mac (mid 2009) previously running mavericks accept a wiped hard drive that was previously running Snow Leopard; second, will the additional hardware of the target Mac (ram, graphics, CPU, etc.) be in the correct software condition (regarding drivers, boot data, cache, etc.) to accept personal data from Snow Leopard; and third, can I re-image the disk implanted in the target Macbook from a Time Machine backup?Â
Info:
MacBook, Mac OS X (10.6.8)
i was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies View RelatedGot a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
I'm getting a new hard drive in my iBook G4 tomorrow, as well as more memory, and was wondering if there is anything special I will need to do to install Leopard on this HD that has nothing on it.
View 24 Replies View Relatedon my Mac Pro (2.66Ghz) I have two hard drives. One contains Leopard and the other hd is used for Time Machine back-ups.I want to add another hard drive that will contain Leopard and Windows XP using Bootcamp.fter I install Leopard on the newer hard drive how can I choose which hard drive to boot from? Also, on a bad day I want to boot to the XP partition on the new drive
View 1 Replies View RelatedI have the disk image for Leopard on my external hard drive. I put it on there from my Powerbook. I tried to reinstall Leopard onto a Macbook but it wouldn't let me because I had to do a GUID partition on the external hard drive. I did that, put the DMG back onto the external drive and went to install it. I went to Startup Disk under System Prefences but my hard drive isn't showing up.
View 4 Replies View RelatedWirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
Rookie questions:
Is there a way to use your iMac drive to load programs over to your MacBook air?? Also, can you remotely ( from MacBook air ) transfer files from your iMac???
my cd drive will not load disks, they just slide in and nothing happens. i thought there was some way to turn off the computer and press a few buttons to reset something...
Info:
MacBook Pro, early 2011
I put the leopard install disk into my computer and started installing it. It went fine until it asked me where to install Leapord. With all other installs (applications, games, etc...) my hard drive will show up and that's what I'll click on, but here nothing shows up except my iPod that was plugged in. As a note, it worked on my other computers, but is not working on my G5.
View 2 Replies View RelatedOk so sometimes I like to watch HD movies on my Xbox from my external usb hard drive that is formatted HFS+. I heard that formatting with Snow Leopard frees up that extra bit of HD space so I thought i'd try it. Well it sure did free up the space - after the erase/reformat there was 249.4 GB out of 250 GB (normally after a reformat there's only 232 GB out of 250 GB). So I go to plug the usb hard drive in my xbox 360 and it didn't recognize it. WTF? So then I tried to reformat it back to HFS+ with Macdrive on Windows but it still isn't recognized by the xbox.
View 6 Replies View RelatedI can't install Leopard on a USB drive from my iMac, then move the drive to my Air and boot that? It's just for emergency purposes, so if trackpad gestures are missing or something, no big deal. I just want a DiskWarrior drive I can use on all my Intel Macs--especially the Air with no DVD drive. (I know I could install OS X using the Air itself--but wireless installation would be slow. Better to install OS X quickly on my iMac via USB.)
View 5 Replies View Related