*Apple officially supports 2 GB of RAM, but third-parties have been "unofficially" able to upgrade it to 3 GB or 4 GB of RAM (it can hold 4 GB but cannot fully utilize the memory beyond 3 GB).
Im thinking about adding that 2gb ram to make it 3gb. but i want to know what are the problems that i may face. Would i be void of apple warranty if anything happens?
I purchased a Hitachi Travelstar 2.5 Inch 500 GB 7200 RPM SATA II 16 MB Cache Internal Hard Drive 0S02858 to replace the dead hard drive in my black macbook (late 2006). I have the old hard drive out. Here are my 2 questions.... first, there is no pull tab on the new hard drive. How will I get it out if I need to? The one I removed is a Seagate and has a covering on the top with the plastic pull tab. should I put that over the new hard drive? It comes right off the old one. Second, when I compare the connectors there is a section, looking straight on at the pins, on the far left that in the old one has 4 pins. In the new Hitachi there is just an empty compartment. Does that mean it won't work? Or should I just try it? If I leave it without the plastic pull tab how will it come out if I have to get it back out?
View 5 Replies View RelatedI have a 2006 Macbook that when powered up, the screen stays black, the machine beeps 3 times, and sleep light blinks 3 times before the process repeats over and over. When doing a search, I saw something about the RAM but
Info:
MacBook
Let me start by saying I have swapped the ram in the computer and the problem persists. I've also tried resetting the PRAM. I have unplugged all devices except the keyboard and mouse. I have reformatted and installed OS X Leopard, Tiger and Snow Leopard. I have even encountered this issue while the computer was running from the install disk. I'm pretty sure software, ram and third party devices can be eliminated from the possible causes. The computer continues to run after the screen goes black. I am connected to it right now using screen sharing, so I know the computer is still working. Putting the computer to sleep and then waking it up temporarily brings the screen back until its next random blackout. I have opened the computer to replace a dead HD, so I suppose it is possible that I knocked something in the process, but I did that back in December and the problem is a relatively recent development. I would really prefer to fix this myself, if I could only figure out what the problem is.
View 6 Replies View RelatedI'm trying to play counterstrike on this laptop and it doesn't seem like 1GB RAM is enough. I looked it up on apple and it says this macbook only supports up to 2GB RAM and comes with 1GB RAM (two 512MB). Do I need to purchase two 1GB RAM or just use one 2GB RAM? Also, is there any specific brands or models you guys can recommend me?
View 5 Replies View RelatedI have an .mpg file I would like to trim. just the last 5 seconds. ideally, then I'd like to add a fadeout to black. what freeware editor apps might I use for this quick and dirty work?
View 1 Replies View RelatedI'm looking for a few good ways to transport and use my UMB. I figure buying a hardshell case & a timbuk2 bag seem like a good combo. Question is - which do you guys think is better, the Speck or Incase cases? Anyone have any experiences? I had the Incase hardshell for my old whitebook.
Seemed to work out alright. The other option I thought of was getting the invisible shield. Anyone have any thoughts?
MacBookPro 2006 While cleaning the keyboard, the tab key came completely off. Nothing is broken, the little plastic thing is still in one piece. I can't seem to fit it all back together to get the tab key to stay in place.
Info:
MacBook Pro, Mac OS X (10.7.3)
I purchased my macbook in 0ct. of 2006, and was wondering how I could tell how much ram I could put in it. I currently have 1gb of ram installed. My macbook is 1.83 ghz intel core duo.
View 1 Replies View RelatedJust a white screen after Apple logo and spinner in middle of screen. OS is 10.6.8.
Info:
2006 MacBook Pro, Mac OS X (10.4.11)
So I was using my early 2006 MacBook (1.8 Ghz Intel Core 2 Duo, tiny amount of RAM) to view a YouTube video, and it froze (gave me rotating rainbow thingy). Since this happens often, I got up to put the computer on the table and do something else. When I picked the computer up, the power cord caught on the table and was pulled off of the computer. Since the battery is 100% dead, the computer shut off abruptly. I've also done this before without trouble. When I go to turn it on, however, now the screen flashes white for a split-second (normal), and I get a gray screen. Eventually, I get a flashing folder with ?. I've tried reseating the hard drive, and pressing down various keys when it starts up, but to no avail. I have a Genius Bar appointment tomorrow, but I was wondering if I could fix it for free... I'm not sure what OS it is, but it's OS X Tiger, I think.
Info:
MacBook, Mac OS X (10.4.11)
I have a 2006 Core Duo MacBook. I shut it down the other day and nothing unusual happened. But, now when I push the power button there's no response at all. Nothing. No lights, no response, no chimes, no screen flicker.Yes, I've read all posts I can find on this and nothing has helped. I've followed the SMC reset (http://support.apple.com/kb/HT3964) and can't zap PRAM since it doesn't even chime. Battery shows a full five lights and the MagSafe cord shows a green LED. I've tried all sorts of booting with just battery, just power, leaving both out overnight but can't get any sort of response. I don't hear any fan motion or HDD whirring up. The power button doesn't seem to be stuck though--it's flush with the case and still gives that slight tactile "click" when depressed. I checked that the RAM's set properly.
View 1 Replies View RelatedI know they are technically different (speed) but can I put my Macbook Pro memory (default of 2GB RAM) in my wife white Macbook (default 1 GB RAM)? Probably not but I wanted to know if anyone has tried anyway.
View 1 Replies View RelatedI left my 2009 MBP AC charger at work this weekend and was wondering if anyone knew if it was safe to use my old '06 MB charger to recharge? I know that the MB power supply is 65W and the MBP is i believe 85W?
View 1 Replies View RelatedSo I've got a 2006 MacBook Pro that's worked fine for me since the day I got it...until now.
The left fan has stopped working so now the left side of the laptop is considerably hotter than the right. I'm from the UK and so is the laptop but I'm traveling around the US at the moment so I was just gonna take it into the next Apple Store I come across.
Also, if I do take it in, what are the chances they'd charge me to fix it? My applecare expired, typically, about 2 months ago.
I turned my computer on in school, and it would not start up past the white screen. I turned it on when I got home, and it gets to the blue screen, and then hangs. I turn it off, and when i turn it back on, the screen flashes and it goes off. I take out the battery and run it off the adapter. It flashes and nothing happens. However, I can hear it churning, but I see nothing on the screen. The sounds are still being made, and they stop after I take out the power cord. I have backups and my new computer that i ordered left week, is on the way.
View 5 Replies View RelatedWhat are the differences and pros and cons? Can you switch out the keyboard on one? Switch harddrive? And just general differences. I'm still on windows but thinking about switching. So a little help would be much appreciated.
View 24 Replies View RelatedI have MBP Tiger 10.4.11 intel powerbook, purchased in '06 when they were initally released, & the logic board was replaced twice under Apple Care warranty. Past problems have been a nightmare to say the least. Has been doing OK tho' with some minor glitches since warranty expired. This week, it has begun randomly doing all sorts of strange things without command such as the following: drawing squares in the middle of a page, highlighting within any application, highlighting names of files, dragging names of files at random, dragging applications out of dock, dragging names of files without command, dragging items out of sidebar. (I have the box checked to ignore accidental input from the trackpad; under trackpad, only clicking & dragging are checked), I've zapped the pram to restore defaults and repaired permissions. Tried to run the Tech Tools CD, but it made an odd noise when I held the C key down upon restart and the disk didn't work.
View 6 Replies View RelatedI wondered if anyone could give me an idea of what to expect when my base 13" MBP arrives soon. I currently have a late 2006 15" 2.16 C2D with 3GB RAM. Things have been going a bit dodgy for a while, battery, trackpad button, screen is not so good, so I needed something new, and more portable. My usual tasks include surfing, emailing, iTunes, iPhoto, watching avi's etc in VLC and rendering some of them for ipod use.What sort of day-to-day difference can I expect?
View 13 Replies View RelatedI need to replace topcase on late 2006 macbook (MA700ZH/A A1181 late-2006 C2D 2.0ghz). What I see the most is version 3 topcase on ebay etc. I don't mind to have a bit more modern part on my macbook Will this v3 topcase fit/work at all? Can somebody confirm? I heard that media control buttons will work only with 10.6 which is fine.
View 2 Replies View RelatedI have a 2006 Macbook and the CD drive has stopped working. Is this something that can be fixed? or would it be more cost effective to get an external CD reader? If a external drive is the better choice, what should I get?
Info:
MacBook (13-inch)
It's from late 2006, but the RAM (3GB) and HD (Western Digital 595GB) are not original. That said, I'm confident neither of these are the cause, as I've had 'em installed for 2 years and 4 months, respectively. The problem: I press the power button. Computer makes the starting sound. Fan whirs on. Grayish-blue screen with Apple logo. Spinning tick wheel underneath. You know the drill. But then, it just suddenly and inexplicably turns off. Fan off, black screen, no HD activity. Nothing. Aaand repeat...nothing seems to change.
This started 10 minutes ago. I'm on a friend's computer now, since I'm at college - this also means that I do not have my installation DVD or indeed any of my wide array of computer-fixing tech components save for my mini screwdriver set. Since I know it's gonna come up - The last thing I did on the computer was shut it down while it installed the latest update for Safari (which I don't use). Seemed everything was going okay - it turned off and I left for dinner, came back all set to write an essay and the darn thing won't make it to the login screen. So naturally, there are no error messages or anything like that. No weird beeps or noises from the HD or elsewhere........................
I'm trying to make an educated guess regarding the usage experience of the base 11.6" Air by using my 2006 17" iMac for reference. Basically, it boils down to processor generation and speed, which I need help understanding.
iMac = Intel Core Duo T2400 "Yonah" 1.83GHz
11.6" Air = Intel Core 2 Duo 1.4GHz
Other specs I believe are either same or better in the Air:
iMac
2mb L2 cache, 667 MHz bus, 2gb RAM
Air
3mb L2 cache, 800 MHz bus, 2gb RAM
how these two computers compare in terms of usage? My current iMac runs Photoshop CS5 tolerably fast and plays 1080p video just fine.
I need to know how to move files and programs from a 2006 black macbook to the 13' Air. I then need to delete everything from the black macbook. Can someone walk me through the process or provide a link?
View 3 Replies View RelatedI have a 15" MBP from around 2006, the one where they first introduced the new magsafe connecters.It's started to make a rattling noise which is very rythmic leading me to believe its the fans. Several years ago it started to make a clicking noise but that stopped and until recently it's been fine.
If it is the bearings on the fans or something like that, how much would that cost to fix?The machine is well out of warranty now.
So my macbook's wrist pad (right side) has been cracked for awhile now. Started out with a small crack, then growing almost 4cm and then snapping off part of the plastic. I tried superglueing it back on (im resourceful ) but it didn't hold. Now I have a 4cm long piece of plastic missing from my wrist pad, and crusty superglue residue left where my wrist goes.
The left side is starting to crack as well, although, not as bad.
Figured I would ask here before I take it to the apple store:
What will all need to be replaced? Will just the wrist pad be replaced or is it attached to the keyboard
I've got a late 2006 MacBook Pro and installed the Wireless N enabler a while back. I've got Snow Leopard now, and the card still reads as N capable in both Network Utility and System Profiler. I've sometimes been able to connect at N speeds, but not always. For example, right now I'm on my office's wireless network. Another guy has a MacBook Pro (a year newer than mine so it shipped with N enabled), but I can only get 54 speeds, while he can get 130. Any ideas? Could it just be a router setting? I option+clicked on the AirPort menu item and took a screenshot. My coworker is also on Channel 6, at 2.4GHz
View 3 Replies View RelatedI have a 17" MBP that currently has 2gb of ram. It's a early 2006 model that Apple claims will only support 2gb. Has anyone had any success or knows if it can support more then this? I would love to have more then 2gb of memory. I plan on upgrading to SL soon too.
View 5 Replies View Relatedis the RAM from the older iBook working with the newer Macbook?
View 3 Replies View RelatedI have a 13" MacBook (White 2.0GHz/1 GB/80 GB) that will not boot. I've tried the troubleshooting tips on the Apple website to no avail. When I turn it on, the light on the front stays light, I can hear the HD spin up, etc. The screen flickers as if it is getting power, but no chimes or sounds whatsoever. I've also tried to reseat RAM, used different RAM, but no dice. I'm hoping that there are a few other things I can try before I'm left with getting a new logic board.
View 9 Replies View Related
