I have a 17" MBP that currently has 2gb of ram. It's a early 2006 model that Apple claims will only support 2gb. Has anyone had any success or knows if it can support more then this? I would love to have more then 2gb of memory. I plan on upgrading to SL soon too.
View 5 RepliesIf you have a late 2006/Early 2007 Core2Duo Macbook Pro (ideally UK-bought 2.33GHz), could you please attempt to do the following: Create a bootcamp partition and install Windows XP pro Install all the relevant updates to your bootcamp partition including Apple bootcamp utility updates Attempt to reboot from windows, either to OSX or back into windows again Let me know the result. I'm trying to investigate if there is an inherent fault in this batch of machines, as mine cannot successfully do this, and i think Apple have a case to answer for, though i may be wrong...
View 3 Replies View RelatedI recently got this Mac Pro (Model number A1186, EMC 2113) with two Quad Core 2.66 GHz Intel Xeon 5150 processors, 16GB of RAM (both RAM riser slots completely filled with 4x2GB sticks of 667MHz DDR2 ECC FB-DIMM each), 2x1TB clean HDDs, and an ATI Radeon HD4870 (512MB DDR5 memory) video card with 2 DVI ports and an S-video port. (I bought the HD4870 later after I found that the one that came with it, an ATI X1900 XT, was part of a recall [sadly this recall ended in 2011.] Plus, the fans on the X1900 were revving up REALLY loud.)The reason I'm posting here is because the darn thing will not "boot." The machine starts up fine (HDDs spin up, lights on the RAM risers illuminate momentarily, etc.), but there is no output out of either of the DVI ports. Not even a gray Apple screen. I have tried the DVI cord and the monitor on two different machines and they both work perfectly fine, and now I have no other Mac available to test the video card on. I'll just have to assume for now that it works. The video card, after the machine is turned on, has three of the four diagnostic LEDs lighted.
The ones that light up are D1601, D1602, and D1603; the other one, D603, does not light up. After some searching around on Google for a little while and sifting through forum after forum, they all seemed to agree upon the fact that these lights were from the two internal power cables (D1602 and D1603) not being plugged in and that there was a critical temperature error (D1601). Note that a) both power cables are in both power slots and hooked in securely and b) these lights turn on immediately after pressing the power button. A light tug from both ends on both cables assures that these cables are not going anywhere soon, and I doubt that there would be such a heating issue as soon as I press the power button, especially since all the fans are running fine. My first thought was that maybe the logic board wasn't getting enough power, but I have no idea on how to check this as almost everything besides the RAM risers and the extension slots are covered by something.Another problem I found is that some of the diagnostic LEDs that should be lighting up, aren't. Out of all the lights, the ones that do light up are the TRICKLE light and the EFI light. I guess it's good that the CPU lights aren't lighting up, but what about the the GPU and POWER lights? Shouldn't those be lighting up too?I also tried booting up from a Snow Leopard disc (there isn't any internal CD/DVD drive [the previous owner removed it for whatever reason], so I've been using an external CD/DVD drive).
When I plugged in my Apple USB keyboard, I decided to press the caps lock key and see if it would light up green. No dice. I tried all 5 USB ports on the machine and none of them worked. But how did the CD/DVD drive work? It spun up when I turned the machine on. So since the keyboard can't be recognized I am unable to boot from a CD, or anything else for that matter.One more issue: there is no startup chime! Tried turning it off and on many different times trying some potential solutions out and not once was there a startup chime. I know for sure this is a huge issue.reconfiguring the RAM (which I inserted per Apple's instructions), resetting the SMC, resetting the PRAM (which wouldn't have worked anyways since the keyboard isn't recognized), and resetting the NVRAM (which, again, probably wouldn't have worked since the keyboard isn't recognized.)So here are my problems.
Info:
Mac Pro
Does anybody know if a early 2006 model macbook can install iLife '09 or iLife '11? I just got my hard drive replaced and was able to upgrade from Tiger to Snow Leopard (I'm a little behind the times). I look at the requirements for iLife, and I think I'm good on everything. This is what I found for the requirements:
System Requirements for iLife '09 Mac OS X v10.5.6 Leopard or laterMac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor.; iMovie req uires an Intel-based Mac, Power Mac G5 (dual 2.0GHz or faster), or iMac G5 (1.9GHz or faster); GarageBand Learn to Play requires an Intel-based Mac with a dual-core processor or better.
512MB of RAM; 1GB recommended.
High-definition video requires at least 1GB of RAM.Approximately 4GB of available disk space.
DVD drive required for installation.
QuickTime 7.5.5 or later (included).AVCHD video requires a Mac with an Intel-based Core Duo processor or better.24-bit recording in GarageBand requires a Mac OS X compatible audio interface with support for 24-bit audio.
Please consult the owners manual or manufacturer directly for audio device specification and compatibility.
Burning DVDs requires an Apple SuperDrive or compatible third-party DVD burner.
Some features require Internet access and/or MobileMe; additional fees and terms apply.
System Requirements for iLife '11
Software Mac OS X v10.6.3 or later.
Hardware Mac computer with an Intel processor.GarageBand Learn to Play requires a Mac with an Intel Core Duo processor or better.AVCHD video from supported video cameras requires a Mac with an Intel Core Duo processor or better. Visit the iMovie ’11 Supported Cameras page for additional details.1GB of RAM.Approximately 5GB of available disk space.DVD drive required for installation. Burning DVDs requires an Apple SuperDrive or compatible third-party DVD burner.Display with at least 1280 x 768 pixel resolution.24-bit recording in GarageBand requires a Mac OS X-compatible audio interface with support for 24-bit audio. Please consult the owner’s manual or manufacturer directly for audio device specifications and compatibility.
Other Requirements Some features and third-party services require Internet access and/or MobileMe; additional fees and terms apply. MobileMe is available to persons age 13 and older. Annual subscription fee and Internet access required. Terms of service apply.iPhoto Print Products are available in the U.S., Canada, Japan, and select countries in Europe and Asia Pacific.GarageBand Artist Lessons are sold separately and are available directly through the GarageBand Lesson Store in select countries.Third-party services may not be available in all languages or in all countries. Use of these services requires Internet access and may require you to accept additional terms.
I have OS X v10.6.8, with 1 GB 533 Mhz DDR2 SDRAM, 2GHz processor speed with 1 processor, 2 cores, 667MHz Bus speed, 2 MB L2 Cache. I don't know where to look to find the information about the 24-bit audio. I clicked on the System Profiler and looked at audio, but it didn't say anything about it. If there is anyone that can answer this question,
Info:
MacBook, Mac OS X (10.6.8)
I have an IMac, early 2006, A1174. Went to awake it from sleep last night, and the power was off. I hit the button to turn it on, no response. I tried different outlets and power cords, same results. The front light doesn't come on, but I do hear the spinning for a split second. I've never had this problem before. I tried leaving it unplugged for several minutes, and I also unplugged my printer, keyboard, external hard drive, everything! No different results.
Info:
iMac (20-inch Early 2006)
I was messing with my Mac Mini late 2006 and accidentally deleted my entire Macintosh HD Hard drive .What do I do ? And I dont have the reinstall disks!
Info:
Mac mini, Mac OS X (10.4)
Does anyone know which 17" LCD panels from the G5 iMac can be swapped with the Early 2006 Duo Core 17" iMac? My "speculation" is that the 17" G5 iSight equiped iMacs are a likely candidate.
View 3 Replies View RelatedI have 2 questions:1) I have a 2.GHz Core Duo CPU. I read that this model has a socketed CPU that can be replaced. Is this true?2) If yes, how fast can I go? Can I use the new Core i3 CPU?
View 10 Replies View RelatedJust a report on my successful upgrade from a Mac Pro 2006 2.66 quad (5150s) to a 3.00 quad (5160s). It was pretty easy, but I can't stress enough having the right tools, particularly the long, thin 3mm allen wrench. You need about 10" of length to get down to the heatsink nuts on the motherboard. I thought my adjustable screwdriver with extender would work, but the extender was too fat for the cutouts in the heatsink. You need a rod no more than 5/16" wide. Also, though people have said that a 15 Torx works (it does), I actually think the 3mm hex is the perfect fit. It may be tough finding these locally, even at a home depot, so you may want to buy online ahead of time unless you want to splurge and buy a set of long allen wrench keys (~$25 and up). The other challenge was connecting the lower heatsink's temperature sensor cable to the motherboard. If you have fat fingers like me, an angled hemostat or needlenose pliers will help you get into the tight space. And lastly, a small vacuum cleaner would be useful to suck all of the dust bunnies off the heatsinks and the fans and out of the motherboard's nooks and crannies. While you're in there, you might as well clean it out
View 10 Replies View RelatedMacBookPro 2006 While cleaning the keyboard, the tab key came completely off. Nothing is broken, the little plastic thing is still in one piece. I can't seem to fit it all back together to get the tab key to stay in place.
Info:
MacBook Pro, Mac OS X (10.7.3)
I purchased my macbook in 0ct. of 2006, and was wondering how I could tell how much ram I could put in it. I currently have 1gb of ram installed. My macbook is 1.83 ghz intel core duo.
View 1 Replies View RelatedJust a white screen after Apple logo and spinner in middle of screen. OS is 10.6.8.
Info:
2006 MacBook Pro, Mac OS X (10.4.11)
So I was using my early 2006 MacBook (1.8 Ghz Intel Core 2 Duo, tiny amount of RAM) to view a YouTube video, and it froze (gave me rotating rainbow thingy). Since this happens often, I got up to put the computer on the table and do something else. When I picked the computer up, the power cord caught on the table and was pulled off of the computer. Since the battery is 100% dead, the computer shut off abruptly. I've also done this before without trouble. When I go to turn it on, however, now the screen flashes white for a split-second (normal), and I get a gray screen. Eventually, I get a flashing folder with ?. I've tried reseating the hard drive, and pressing down various keys when it starts up, but to no avail. I have a Genius Bar appointment tomorrow, but I was wondering if I could fix it for free... I'm not sure what OS it is, but it's OS X Tiger, I think.
Info:
MacBook, Mac OS X (10.4.11)
I have a 2006 Core Duo MacBook. I shut it down the other day and nothing unusual happened. But, now when I push the power button there's no response at all. Nothing. No lights, no response, no chimes, no screen flicker.Yes, I've read all posts I can find on this and nothing has helped. I've followed the SMC reset (http://support.apple.com/kb/HT3964) and can't zap PRAM since it doesn't even chime. Battery shows a full five lights and the MagSafe cord shows a green LED. I've tried all sorts of booting with just battery, just power, leaving both out overnight but can't get any sort of response. I don't hear any fan motion or HDD whirring up. The power button doesn't seem to be stuck though--it's flush with the case and still gives that slight tactile "click" when depressed. I checked that the RAM's set properly.
View 1 Replies View Related*Apple officially supports 2 GB of RAM, but third-parties have been "unofficially" able to upgrade it to 3 GB or 4 GB of RAM (it can hold 4 GB but cannot fully utilize the memory beyond 3 GB).
Im thinking about adding that 2gb ram to make it 3gb. but i want to know what are the problems that i may face. Would i be void of apple warranty if anything happens?
I know they are technically different (speed) but can I put my Macbook Pro memory (default of 2GB RAM) in my wife white Macbook (default 1 GB RAM)? Probably not but I wanted to know if anyone has tried anyway.
View 1 Replies View RelatedI left my 2009 MBP AC charger at work this weekend and was wondering if anyone knew if it was safe to use my old '06 MB charger to recharge? I know that the MB power supply is 65W and the MBP is i believe 85W?
View 1 Replies View RelatedSo I've got a 2006 MacBook Pro that's worked fine for me since the day I got it...until now.
The left fan has stopped working so now the left side of the laptop is considerably hotter than the right. I'm from the UK and so is the laptop but I'm traveling around the US at the moment so I was just gonna take it into the next Apple Store I come across.
Also, if I do take it in, what are the chances they'd charge me to fix it? My applecare expired, typically, about 2 months ago.
I turned my computer on in school, and it would not start up past the white screen. I turned it on when I got home, and it gets to the blue screen, and then hangs. I turn it off, and when i turn it back on, the screen flashes and it goes off. I take out the battery and run it off the adapter. It flashes and nothing happens. However, I can hear it churning, but I see nothing on the screen. The sounds are still being made, and they stop after I take out the power cord. I have backups and my new computer that i ordered left week, is on the way.
View 5 Replies View RelatedWhat are the differences and pros and cons? Can you switch out the keyboard on one? Switch harddrive? And just general differences. I'm still on windows but thinking about switching. So a little help would be much appreciated.
View 24 Replies View RelatedI have MBP Tiger 10.4.11 intel powerbook, purchased in '06 when they were initally released, & the logic board was replaced twice under Apple Care warranty. Past problems have been a nightmare to say the least. Has been doing OK tho' with some minor glitches since warranty expired. This week, it has begun randomly doing all sorts of strange things without command such as the following: drawing squares in the middle of a page, highlighting within any application, highlighting names of files, dragging names of files at random, dragging applications out of dock, dragging names of files without command, dragging items out of sidebar. (I have the box checked to ignore accidental input from the trackpad; under trackpad, only clicking & dragging are checked), I've zapped the pram to restore defaults and repaired permissions. Tried to run the Tech Tools CD, but it made an odd noise when I held the C key down upon restart and the disk didn't work.
View 6 Replies View RelatedI wondered if anyone could give me an idea of what to expect when my base 13" MBP arrives soon. I currently have a late 2006 15" 2.16 C2D with 3GB RAM. Things have been going a bit dodgy for a while, battery, trackpad button, screen is not so good, so I needed something new, and more portable. My usual tasks include surfing, emailing, iTunes, iPhoto, watching avi's etc in VLC and rendering some of them for ipod use.What sort of day-to-day difference can I expect?
View 13 Replies View RelatedI need to replace topcase on late 2006 macbook (MA700ZH/A A1181 late-2006 C2D 2.0ghz). What I see the most is version 3 topcase on ebay etc. I don't mind to have a bit more modern part on my macbook Will this v3 topcase fit/work at all? Can somebody confirm? I heard that media control buttons will work only with 10.6 which is fine.
View 2 Replies View RelatedI have a 2006 Macbook and the CD drive has stopped working. Is this something that can be fixed? or would it be more cost effective to get an external CD reader? If a external drive is the better choice, what should I get?
Info:
MacBook (13-inch)
My old Powerbook had an S-Video output that I used to connect to my TV. Since then I've bought a MBP, and recently I purchased a Samsung PN50B550T2F TV (My first HD... went a little overboard!).
I want to connect my MBP to it so that I can watch some online content: Southpark studios.
What's the best way to go about doing this? What kind of cables (audio/video) should I buy?
Running a 2.4ghz Intel Core 2 Duo and currently 2gb 667 MHz DDR2 SDRAM. It has 2 slots, whats the max I can put in? What type of RAM do I purchase and who has the best Price on same.
Info:
Mac Pro, Mac OS X (10.7.3)
My system currenlty has 2GB.
Info:
MacBook
Pro, Mac
OS X (10.5)
I bought an used macbook pro early 2011 (i5 2.3) and its not charging. With the battery in it the green light doesnt turn on (doesnt charge at all). If I open the macbook and remove the battery the green light turns on and I can turn on the macbook.I have already bought a new battery and its not charging.Could it be the magsafe board? I am asking because the light goes on without battery so I thought that the magsafe board maybe is working.
View 6 Replies View RelatedI have an early 2011 MBP with 4GB RAM installed and i want to upgrade to 8GB but before i do so i have some questions to make. The MBP has 2 RAM slots so my first question is whether the 4GB is 2x2GB or 1x4GB. Will I see any difference in my MBP performance if i do decide to upgrade?the model of the RAM which is compatible with my model.
Info:
MacBook Pro, Mac OS X (10.7.2), Early 2011
It's from late 2006, but the RAM (3GB) and HD (Western Digital 595GB) are not original. That said, I'm confident neither of these are the cause, as I've had 'em installed for 2 years and 4 months, respectively. The problem: I press the power button. Computer makes the starting sound. Fan whirs on. Grayish-blue screen with Apple logo. Spinning tick wheel underneath. You know the drill. But then, it just suddenly and inexplicably turns off. Fan off, black screen, no HD activity. Nothing. Aaand repeat...nothing seems to change.
This started 10 minutes ago. I'm on a friend's computer now, since I'm at college - this also means that I do not have my installation DVD or indeed any of my wide array of computer-fixing tech components save for my mini screwdriver set. Since I know it's gonna come up - The last thing I did on the computer was shut it down while it installed the latest update for Safari (which I don't use). Seemed everything was going okay - it turned off and I left for dinner, came back all set to write an essay and the darn thing won't make it to the login screen. So naturally, there are no error messages or anything like that. No weird beeps or noises from the HD or elsewhere........................
