I have a 2006 Macbook and the CD drive has stopped working. Is this something that can be fixed? or would it be more cost effective to get an external CD reader? If a external drive is the better choice, what should I get?
Info:
MacBook (13-inch)
So I've got a 2006 MacBook Pro that's worked fine for me since the day I got it...until now.
The left fan has stopped working so now the left side of the laptop is considerably hotter than the right. I'm from the UK and so is the laptop but I'm traveling around the US at the moment so I was just gonna take it into the next Apple Store I come across.
Also, if I do take it in, what are the chances they'd charge me to fix it? My applecare expired, typically, about 2 months ago.
I have a 2006 MacBook 1.1 with a crashed hard drive. Can I put in any 2.5 inch SATA hard drive, or are there restrictions?
Info:
MacBook, Mac OS X (10.4.11)
I purchased a Hitachi Travelstar 2.5 Inch 500 GB 7200 RPM SATA II 16 MB Cache Internal Hard Drive 0S02858 to replace the dead hard drive in my black macbook (late 2006). I have the old hard drive out. Here are my 2 questions.... first, there is no pull tab on the new hard drive. How will I get it out if I need to? The one I removed is a Seagate and has a covering on the top with the plastic pull tab. should I put that over the new hard drive? It comes right off the old one. Second, when I compare the connectors there is a section, looking straight on at the pins, on the far left that in the old one has 4 pins. In the new Hitachi there is just an empty compartment. Does that mean it won't work? Or should I just try it? If I leave it without the plastic pull tab how will it come out if I have to get it back out?
View 5 Replies View RelatedI was wondering if anyone has had this problem or would be able to help me out.I've installed Windows 7 on my 2006 mac pro (mac pro is still in Leopard 10.5 and have'nt used any bootcamp drivers). Everything installed fine and seems to work ok but after about 30mins or so all the fans appear to shut down which can't be a good thing. Should I've installed it with Snow Leopard?
View 1 Replies View RelatedSo, I have a 2006 model MacPro. Currently, I have (3) 500GB hard drives and (1) 750GB hard drive.
I would like to possible add a 2TB or at least 1.5TB internal hard drive to it (I have so much clutter with my external drives already)
I called Apple and they said that model only went to 750GB....
Is there really a limit? It's a SATA drive so I figure it would keep going? has anyone had any luck with larger drives??!
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
The internal optical drive (MATSHITA DVD-R UJ-846) for my Intel iMac (late 2006) stop working after listening to a music CD. I inserted another music CD and the drive will try to read the CD, but after awhile, it would eject the CD. I inserted the last music CD I listened to and it did the same thing. Then I inserted several other data cds into the drive resulting in the same problem.
Info:
iMac, Mac OS X (10.6.7), 2.16 GHz Intel Core 2 Duo
I bought HIS Radeon HD4870 512MB DDR5 for my Mac Pro 2006 1.1. The first problem I've found it that card will not fit to slot 1, because of too long screws. So I installed it in slot 2, leaving 7300GT in slot 1. The next problem was how to get rid of these power cables - I've tried the more elegant way taking that molex adapter under HDD trays, but cables where too short So I installed them on the right of Superdrive's tray. Now on Mac OS X I got kernel panic (probably the injector thing). On Windows Vista card is detected, but automatically disabled (probably not enough power or just PCI-EX 1x slot is not compatible). Here are photos from the operation. I'll try to install Accelero S1 rev. 2 with Noctua 120 mm fan and will see how things go I've also ordered two special Apple PCI-EX power connectors from Austria.
View 24 Replies View RelatedMy DVD drive has been screwy lately -- it will play some DVDs, but not others -- perfectly good ones, even after having played the very same ones.
Also, burning CDs -- sometimes it will, sometimes it won't.
Is there any kind of maintenance I can do? (Can't afford to get a new one right now...)
Stats: MacBook Pro, first generation. OS 10.4.11
When I insert any cd into my cd drive it loads for about 10 seconds then it just spits back out. I have had my computer since Christmas 2011 and I have never had a working CD drive.
Info:
MacBook Pro, Mac OS X (10.7.2)
MacBookPro 2006 While cleaning the keyboard, the tab key came completely off. Nothing is broken, the little plastic thing is still in one piece. I can't seem to fit it all back together to get the tab key to stay in place.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a new Macbook Pro and I also have a sandisk cruzer flash drive. I use a PC at work and when I brought the drive home to do some work on the Mac absolutely nothing happens. Be easy on me. This is my first mac and I am new at this.
View 3 Replies View RelatedSo I bought a MBP i7 in May and I love it, Never had any issues with it at all. But I never used the DVD drive once until today. I wanted to rip a DVD with MacTheRipper. It didnt work. Rips fine on my new Mid 2010 Mac Mini...
So I tried to play the DVD with the DVD player app... just get a solid black screen... VLC, nothing.
Anyone else have any issues like this?
My USB Drive on my Macbook Pro stopped working. I have done power downs, resets, and still not working. thinking a driver is not there. Running OS X 10.7.3 . Looking for some options before taking it to hardware repair for service.
Info:
MacBook Pro, Mac OS X (10.7.3), usb drives stopped working
just today I noticed my cd drive isn't working at all. When I put a cd or whatever in nothing happens. also I spilld some V8 fruit juice on the keyboard and the cd drive still worked after that. but now it doesnt work. Anything that I can do?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
since 2 days my optical drive makes one very strange noise every time in "wake it up" or turn it on. The sound is done three times. I realized today that now I'm not able to put a disc into the drive, instead of "absorving" the disc, the drive expels it.
Info:
MacBook Pro, Mac OS X (10.7.2)
I purchased my macbook in 0ct. of 2006, and was wondering how I could tell how much ram I could put in it. I currently have 1gb of ram installed. My macbook is 1.83 ghz intel core duo.
View 1 Replies View RelatedJust a white screen after Apple logo and spinner in middle of screen. OS is 10.6.8.
Info:
2006 MacBook Pro, Mac OS X (10.4.11)
So I was using my early 2006 MacBook (1.8 Ghz Intel Core 2 Duo, tiny amount of RAM) to view a YouTube video, and it froze (gave me rotating rainbow thingy). Since this happens often, I got up to put the computer on the table and do something else. When I picked the computer up, the power cord caught on the table and was pulled off of the computer. Since the battery is 100% dead, the computer shut off abruptly. I've also done this before without trouble. When I go to turn it on, however, now the screen flashes white for a split-second (normal), and I get a gray screen. Eventually, I get a flashing folder with ?. I've tried reseating the hard drive, and pressing down various keys when it starts up, but to no avail. I have a Genius Bar appointment tomorrow, but I was wondering if I could fix it for free... I'm not sure what OS it is, but it's OS X Tiger, I think.
Info:
MacBook, Mac OS X (10.4.11)
I went to the applestore and, after purchasing one to one, was turned down for a data transfer from my old macbook pro to my new macbook pro. The "genius" recommended that I buy an external hard drive from newegg and get some screwdrivers and do it myself. So I did, except (I think) he told me to get the wrong kind of external hard drive enclosure and now I'm just really upset because I went through the process and got the hard drive out of the old macbook pro perfectly. What do I need to (re)buy to make this data transfer work?
View 6 Replies View RelatedI recently purchased this Portable (iomega) 500GB hard drive. I just realized it only works on my Mac's USB ports, but not with my USB Hub. Does it exceed the power limit of the USB Hub? I don't see how it is possible, because I currently have nothing else plugged into it, and it uses a power adapter.
It worked with my old Hard Drive, which is big and uses a power adapter. Now it doesn't seem to work. Also I tried on just a USB adapter that makes the cable longer, still doesn't work. Only the MBP ports work! However, the hub works for things such as phone charger, and speakers right now.
i definatly brought apple care (3 year warrenty?) its on my reciept, but when i check the warrenty online is says basic 1 year warrenty for my serial number. gah. anyways, thats not the problem, it just doesnt help the situation.
my dvd drive has just stopped working, it used to make a horrible clicking noise when a cd was inserted and then work fine ( it always made that noise, i just thought it was ok, now, im not so sure!) then a few days ago i inserted a dvd and nothing, no noise, and it didnt recognise there was a dvd inside. the eject button done nothing. i had to tilt my macbook and tap it a few times till it fell out.
i ran tech tool, and it says my video ram failed.
I just upgraded to snow leopard and when I try to plug in my external hard drive I get a prompt saying "the disk inserted was not readable by this computer." It was working before when I was running leopard.
View 2 Replies View RelatedMy MacBook Pro is fairly new, but I have a 500g Western Digital external hard drive that was originally hooked up to my previous computer, a PC. When I plugged in my external, I was able to move files from it to my Mac. However, I was unable to delete files off of the external while it was plugged into my Mac and I could not add files, either.
When I booted up my old PC and plugged the external into it, it worked fine. So I can only assume that since I first used it on my PC, I'm having trouble using it on my Mac. A friend of mine told me something about how I'd have to reformat my computer and start over. PLEASE tell me this is not the case. Does anybody know a way to fix this that lets me keep my Mac as is and not have to delete anything?
Last week the hard drive crashed (or so I assumed) on my late 2009 13" Mac-book Pro.I was getting the blinking folder icon at startup. After trying to boot in safe mode and several other start-up options, I booted from an OSX install disk and found that the drive wasn't appearing in the Disk Utility - this, and the fact that I had been running it at very high capacity for far too long is what led me to assume it was utterly dead.So I ordered a new drive, a WD Scorpio Blue 500GB, and installed it today. Again booting from the OSX install disk, I went to the disk utility (thinking I would format the drive before installing the OS), but new drive wasn't there either.Assuming I installed the new drive correctly (it was pretty straightforward), this is leading me to assume that I was wrong with my diagnosis.
Info:
MacBook Pro, Mac OS X (10.7.3)
My external hard drive is not working in my MacBook Air. What can I do?
View 5 Replies View RelatedI have an hitachi external hard drive. It has always worked up until yesterday with no problems. Today it has stopped working with my macbook pro and my works hp laptop, it will still light up and I can hear that it is turned on but it won't appear on the screen. I cannot find any trace of it on my macbook, I've tried the disk utility but it is not there. I tried a friends hp laptop and it is working fine on that.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have a 2006 Core Duo MacBook. I shut it down the other day and nothing unusual happened. But, now when I push the power button there's no response at all. Nothing. No lights, no response, no chimes, no screen flicker.Yes, I've read all posts I can find on this and nothing has helped. I've followed the SMC reset (http://support.apple.com/kb/HT3964) and can't zap PRAM since it doesn't even chime. Battery shows a full five lights and the MagSafe cord shows a green LED. I've tried all sorts of booting with just battery, just power, leaving both out overnight but can't get any sort of response. I don't hear any fan motion or HDD whirring up. The power button doesn't seem to be stuck though--it's flush with the case and still gives that slight tactile "click" when depressed. I checked that the RAM's set properly.
View 1 Replies View Related*Apple officially supports 2 GB of RAM, but third-parties have been "unofficially" able to upgrade it to 3 GB or 4 GB of RAM (it can hold 4 GB but cannot fully utilize the memory beyond 3 GB).
Im thinking about adding that 2gb ram to make it 3gb. but i want to know what are the problems that i may face. Would i be void of apple warranty if anything happens?
