My macbook pro will not start. It just goes to the white screen with the apple and the circular loading section but doesn't go further than that it just stays.
Info:
MacBook Pro, iOS 5.1
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
Ok, last night there was an update for OSx Lion. I installed the 3 items, it said I needed to restart, which I did. When it restarted there was another box, which was checking the updates or something. After that finished, it logged into my home screen, and I shut it off. Today, I tried turning it on and it was stuck. After 10 minutes, I held the power button to shut it off and try again. I did this twice, and on the third time a loading bar showed up at the bottom of the screen, went for a while and almost reached halfway, then it dissappeared. I waited, but nothing happened. What's wrong and how to I fix it? I think its 10.7.3, but it might be 10.7.2 I'm not sure what the difference is.
Info:
MacBook Pro, Mac OS X (10.7.3)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
Has anyone seen and solved the issue of receiving a white screen on reboot with a slashed circle? Prior to rebooting the computer was running V-E-R-Y slowly. I saved my work and rebooted only to receive this screen.
Info:MacBookPro, Mac OS X (10.6.8), new 512GB SSD installed 30days ago
My ibook g4 when starting up stays on the grey logo screen with the loading circle , but won't do anything further I left it on for two days straight to see if it needed time to load but still nothing ... What do I do !?
Info:
iBook
My MacBook air won't reboot...just has blue screen with apple and circle. Someone said control R which I did then it offered me options. try the other options as I have all of my work on this computer and am afraid of loosing it.Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
I was working on this machine 3 hours back. Thereafter I put the machine on standby mode. Now when i try to start the laptop, the icon for password does not appear. Instead a mouse curser sign and a circle [like freezing] appears on the screen.
View 1 Replies View Relatedwhen i start up my macbook it goes the the gray screen with apple logo then the logo turns in to a circle with a line in it
Info:
MacBook
My Macbook Pro is not starting past the grey screen and the apple logo and the rolling circle. I have tried every method and I am desperate to do anything to start my computer even erase the entire disc. I have contacted the Apple store and they told me the cost will be equivalent to $600 to just repair it and no way I will be able to afford it. I am willing to do anything and even erase my entire disc. However, for that the instructions on the Apple page state that 'Insert your Mac OS X 10.4 or 10.5 installation disc'. However, I do not have my installation disc Is there any other way I can erase the OS system and at least reboot my Macbook?
Info:
MacBook Pro
before I went to bed, I was playing the Sims 2, when my iBook G4 crashed. Our power cord can be a bit dodgy, so sometimes that happens. I didn't really think about it much, just closed the laptop and went to sleep.Last Monday morning, I opened it and pressed the power button. It began turning on, and got as far as the grey screen with the apple and the spinning circle. And then it just froze. The circle stopped turning.
I freaked out a bit, and restarted it a bunch of times, each time with the same result. (One time it stopped spinning, and then told me a restart was required. Huh. The rest of the times the exact same thing happened though.) I even tried unplugging and removing the battery, but it made no difference. So eventually I just shut it and decided to try again later.Last Tuesday I opened it and pressed the power button without much hope, and again the apple and circle came up just fine, then stopped, but then a bunch of words and numbers popped up.I'm a complete computer noob, but they don't look good to me... or are they good?
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/REEASE_PPC
i tried several things like zapping the PRAM, open firmware, and taking out RAM. also took out my pci wireless card and usb card. nothing helped, but eventually it booted up. i thought that the hard drive was probably dead but i couldnt boot off a tiger install disc when i tried.its been having problems starting up everyday since then. sometimes it will boot with the circle spinning and just stay there. other times it will boot with some junk on the screen and the restart message underneath, boot up with no spinning circle, or have the apple change to a circle with a slash through it
View 3 Replies View RelatedMy screen just has the apple icon and the spinning circle - wont log on.   Lost power without shutting down
View 1 Replies View RelatedWhy do I have a white circle with a line through it over Pages on my dock? This happened after I reinstalled Snow Leopard on my MacBook. How do I get rid of it?
Info:
MacBook, Mac OS X (10.6.3)
Why won't my computer go past the white loading screen and how can I fix it?
Info:
iMac
I am having a major problem with my MacBook Pro and it just wont boot past the apple loading screen at all I have tryed al lot of ways to fix this and it just wont work It does not go into safe mode, it does not boot from cd, the PRAM thing wont work, verbose mode or the comand + s mode wont work I tryed clean install but it wont boot from dvd, also it will not boot in any other way It was working perfectly last night and i just shut it down and it does not work know. Â
My friend was also trying to install Lion from his account but the .dmg for it did not open so we quit and that night i used it for my essay and finished and then i turned it off and next day in the morning it don't workÂ
Info:
MacBook Pro, Mac OS X (10.6.8)
I am aware there are others threads of my problem however they date back years ago and after trying their solutions it still does not work.Â
After using Time Machine to restore my hard drive from a backup, I can't get past the white loading screen with apple logo after system restart during restore process. Ive gone into disk utility and repaired hard drive - it's fine. So I know this is a software glitch. I've also tried resetting SMC & PRAM (whatever those mean). No success and i cannot get past the white loading screen.Â
I'm running Mavericks (latest) on a late 2009 iMac
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!Â
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
My Mac book pro will not boot past the whit apple screen.
Info:MacBookPro, iOS 5.0.1
My Mac book pro is not starting , it's just showing the white screen with apple logo
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
When I turn my macbook pro on I get a green and white lined apple then just a white screen?
View 1 Replies View RelatedI have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)Â
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.Â
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.Â
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I am trying to fix a friends macbook pro. When I turn it on the screen shows the apple and the spiral underneath it spinning like it should then when it stalls for .2 seconds it goes to a white screen then there is vertical purple lines in groups across the screen. So the screen is white/purple. Then it fades to just white and I cant do anything.
I hooked up my monitor with a DVI cable to see if it was the motherboard that was possibly bad but the monitor works just fine with the cable. I can use the computer with the laptop keyboard/mouse and it works just fine. The laptop screen just stays blank the whole time. I uploaded a vid to utube for it. If anybody has any ideas for me please help. I dont know if this is a monitor problem or the inverter or the motherboard, possibly some other piece of hardware?
Here is the link to the video: http://www.youtube.com/watch?v=1JBFv-GTBmY
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
How do I reset or reboot a first version of MacBook Air? It crashed when I tried to restart it and now just shows white screen with Apple Logo ?Â
Info:
MacBook Air, iOS 5
Ok i just put boot camp on my Mac about 2 weeks ago. I put Windows Xp Prof on and have been only useing that... about 4 days ago i started useing Mac then just the other day i went to go on to mac and it was at the Apple loading screen then it shut down and it does this every time i try to go on to mac... it has done this with Windows also and i just reboot camp it but this time i dont know what to do.... can any one help?
View 4 Replies View RelatedMy macbook pro just has a black screen with a small coloured circle on the right of the screen. It is frozen and wont respond to turning it off or on. It is plugged into mains power.
Info:
MacBook Pro
