MacBook Pro :: It Will Not Boot Past Apple Loading Screen At All
Apr 14, 2012
I am having a major problem with my MacBook Pro and it just wont boot past the apple loading screen at all I have tryed al lot of ways to fix this and it just wont work It does not go into safe mode, it does not boot from cd, the PRAM thing wont work, verbose mode or the comand + s mode wont work I tryed clean install but it wont boot from dvd, also it will not boot in any other way It was working perfectly last night and i just shut it down and it does not work know. Â
My friend was also trying to install Lion from his account but the .dmg for it did not open so we quit and that night i used it for my essay and finished and then i turned it off and next day in the morning it don't workÂ
My mac was shutting down and it took sooo long (blue screen with the spinning loader). I never experienced this, cause normally the dock would vanish and my mac would shut down instantly. But this time it kept showing a blue shutdown screen, so I decided (after about 2 minutes) to hold the power button and force a shutdown. The next time I booted the mac it showed me the gray boot screen, with the spinning wheel and a gray loading bar, which I think is indicating a firmware update or something that has to do with my forced shutdown. But the bar gets to about 1/8 and then vanishes. The spinning wheel stays, but nothing else happens. It just hangs and keeps spinning forever.
I've got this little problem with my 2months old iMac i5 since this morning. Yesterday everything was fine, I Watched a movie and updated some software, nothing illigal or damaging. Today I tried to boot my iMac, It showed the apple loading screen, with some kind of loading bar under it. I thought he just had to do that because of the update, so I decided to make breakfast and come back to check on it. When I came back, the bar was gone, but he was still loading! (15 minutes later). So I decided to reboot. still the same problem. I decided to boot from cd to see if this works, to select the startup drive. First I tried to fix the hard drive, but it is unable to fix it. I don't care to format my mac, but would like to know if there are other options to try first.
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart. Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. I already tried the Command-Option-P-R keys trick like five times.
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
I have a 1.83 Ghz MBP with 512 mb of RAM (lame I know). The other day someone was using my computer to burn a CD on iTunes when all of my programs began failing. On instinct I rebooted my computer to solve the problem. Alas, now I cant boot past the grey apple screen, and the gear is spinning away. Saddest part of the story is that I had time set aside to back up my computer the day after this happened . Anyway what is the best thing to do from here? I haven't made any moves to fix it yet really, so what is the best thing that I can do to try and get my files back?
Information: MacBook Pro Mac OS X (10.4.10) Grey Screen, Spinning Gear
I have one of the old blue PowerMac G3 computers, and I kept getting a kernel panic, so I reset the RAM and now when I start up the computer, it stops at the apple screen without even spinning. I've tried booting it in single user mode, and for some reason it doesn't make a difference what keys I hit while turning on the computer. It still boots to the apple screen.
I'm trying to repair a Powermac G5 (dual 2.0, the first model I believe, with a new Radeon 9800 graphics card) that won't boot and I'm having some problems that I can't seem to diagnose.
The machine will boot to the openfirmware prompt or target disc mode and will show the 'OS not found' icon if left to boot from the HD (which has been wiped). If I try to boot from either the included restore disc or a retail 10.4 DVD I've tried it will show the boot screen with the Apple logo on it but no spinning status indicator underneath. It just freezes on that screen. Once it showed the status indicator but it just continued to spin for about 30 mins, at which point I gave up. Same issue if I try to boot the hardware test (except it freezes on the hardware test loading icon rather than the Apple icon). The superdrive appears to work as it is accessible in target disc mode.
I've reset the SMU and reset the PRAM via the keyboard shortcut. The one thing that leads me to think it's a firmware fault is that when I run the 'reset-nvram' command it gives an OK, but when I then run 'reset-all' it freezes rather than rebooting. Any ideas anyone?
I recently required a Power Mac G4, and it was working fine, albeit a bit slow but I just assume that was because there's too many files on it, but that's another story. I shut it down before I left work, when I came back in the morning it was just the grey screen with the apple. I reset it, still no response. I reset the PRAM, nothing. I tried to boot in Single user mode, nothing. I tried to boot in verbose mode, nothing. I force ejected the CD and put in an OSX disk one from my laptop, asked it to force read by restarting and pressing "C" and still nothing. I am not sure if a cable inside has been jarred lose.
I have just finished moving my G4 Sawtooth from one house to another. I shut down my machine properly at the one house carefully moved everything over and re-attached the peripherals. Fired up the machine and was greeted promptly with the Apple boot screen and spinning thingy. Then it spun and spun and continued to spin some more. After about 10-15 minutes my desktop backgrounds appeared on the dual monitors, but then sat there like that and no finder ever appeared. After waiting about another 5 minutes, I shut off the machine by holding down the power button. I waited about 10 seconds and powered it on again. Same thing, but this time it just sits at the grey Apple boot screen with the thingy spinning forever. Then I noticed something unusual.
I could hear one, or both of the internal hard drives park the heads and spin down like it was going to sleep. I hadn't noticed that before, but presume it was doing it all along. Meanwhile the computer kept spinning away on the boot screen. I thought, great my drive has crashed and burned. So I removed it and attempted to mount it on my G5 using an external ATA-USB adapter. It mounted without a problem and I was able to see and copy all of the files. So then, I took a spare drive I had with a valid bootable OSX Leopard install and put it into the G4. Fired it up and lo and behold, the same problem. The drive spins up, the machine shows the apple boot screen and keeps spinning the thingy, then after a bit of time the drive parks the head and spins back down. I'm stumped and would like some assistance in resolving this problem. Any suggestions? Oh, and yes, I've tried reseating all cards and memory and disconnected all peripherals.
I had been using my MBP running Snow Leopard to play movies and music through a TV/stereo and brought it with me when I moved to do the same, but now it won't start it. I kept it asleep as I brought it on the plane, then when I got to my new apartment, it was frozen. I shut it down, then tried to turn it back on but it get stuck in the grey loading screen with the Apple logo.Â
I've tried starting in safe mode (it will bring up the safe mode loading bar, then that disappears and it gets stuck on the normal gray loading screen).I've also tried resetting the SMC and NVRAM.Â
Then, I tried to start it up from a friend's OS X install disk (but it came with his MacBook from the same era, so idk if it only works for MB and not MBP), but that doesn't work either (selected it as the startup disk by holding Option when booting up, then selecting it. It then goes to what it does normally except it will turn itself off instead of gettting stuck.)Â
I don't know what else to do. I'm assuming something is seriously broken. I'm hoping it might just need a reinstall or maybe a new hard drive, which I could do if it's not too expensive.Â
Info:MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.6)
I was updating the permissions on my osx drive and finder froze so I relaunched it and finder would no longer work, I got several messages about obscure things not being installed properly like "bluetoothkeyboard". I then restarted my iMac and ended up stuck at the loading screen. I've tried everything iveseen on the forum like fsck and using the install cd but nothing seems to be working
Ps, not 100% certain on my os, I knew it was snow leopard but not sure if it is 10.6.8 or not
My mother's unibody white MacBook will not get past the grey apple and spinning gear when you first boot up the computer. This was after she opened a link in an email from a friend who had her email compromised. Now I'm getting spam emails with the same link from my mother's hacked email, and her computer won't even get to the login screen. I took it to the genius bar only to be told it was likely HD failure, but the windows partition works without a hitch! What could this be? A trojan? Is there any way to retrieve data (really just pictures) before I attempt to reinstall OS X?
My mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok. Â
I have a MacBook pro core 2 duo from 2009. I am running os x lion. I ca not get it to boot past the apple icon and the progress wheel. Btw why has apple not made a mobile friendly support site?
I hardly ever turn off my Macbook unless i need to - I just close it and use it whenever i need to. I let the battery run dry as Apple suggests to do every now and again, and turned it on the next day. It started to boot and took a little longer to get past the grey apple logo and loading circle and then froze on the blue screen. I can control the mouse, but every few seconds it changes to a darker blue, cursor disappears but returns after a second or two. I've tried:
- Booting into safe mode (Same thing happens) - Booting from CD and repairing permissions (Said everything was ok, same thing happens when I booted) - Single user mode (used some commands from an Apple page and restarted)
I can however boot into windows perfectly fine, which leads me to suspect it's a corrupt log in item. I'd like to know for sure it's not a hardware problem so I don't have to take it into an Apple Store.
My wife has a Macbook with an Intel Core 2 Duo processor (Macbook4,1). I am trying to replace the original SATA hard disk (160 GB) with an SSD. I have two SSDs here with me:Â
1) Intel 320 series, 160 GB
2) Crucial M4, 128 GBÂ
In both cases, after replacing the hard disk with the SSD, I am unable to get the Macbook to get any further than the "Mac sound" and grey screen.Â
In my first attempt, I cloned the original disk to the SSD on another computer, verified the data got on there OK, and installed the SSD into the Macbook. In subsequent attempts, I just formatted the SSD to see if the Mac would recognize it at all.Â
When the original hard disk is installed, and my Snow Leopard install DVD is in the DVD drive, during the boot, I can hold down the option key and get a boot choice of booting from the hard disk or the DVD. With either SSD installed, when holding down the option key I get no choices at all, it just sits there (it does access the DVD for a few seconds but then nothing).Â
I have another 160 GB "regular" hard disk here as well and when I install that I also get the choice to boot from the hard disk or the DVD (although booting from the hard disk does not work since it's a hard disk from a PC).Â
combination of Macbook and SSD, installing into the hard drive bay? I've seen many posts from people who have had success putting an SSD into their Macbook so I am assuiming it's possible.Â
I was having trouble submitting an assignment on the American Military University website. After I finally submitted and verified my submission was successful, Finder popped open a window, without being prompted, with a specific part of my "private" folder showing. In the info window it showed that I had read only privleges, but that a user named "wheel" had permissions. Thing is, there is no such user. I am the sole user, and that is not my user name. I panicked, thinking I was being hacked, and moved the entire "private" folder to the trash. It was over 5 gigs. I had to input my admin password after dropping the folder in the trash. Then, my system froze. Now I can't get past the grey boot screen with apple logo and spinning wheel.
I've tried zapping PRAM. I ran disk utility from both the install disk and the startup disk for live verify. NO errors found. Still won't boot. I tried safe mode, and got a status bar below the apple logo but it vanished before filling completely and then the MacBook just continued to hang there spinning the wheel without a status bar. Tried rebooting while holding shift-command-v and got to watch as the computer tried to boot in safe mode, but I got the following messages before the darn thing just began to hang there again:Â
getaddrlinfo(): node name nor username provided, or not known getaddrlinfo(): node name nor username provided, or not known getaddrlinfo(): node name nor username provided, or not known getaddrlinfo(): node name nor username provided, or not known launch_msg(): Socket is not connected launch_msg(): Socket is not connectedÂ
Today I was using my MacBook 2008 aluminum, and I ran out of battery so the system shut down the computer to save the files. I plugged in my computer to start it up but the screen turned grey for a while. I shut down my computer and turned it on and it started up to the grey login screen but it won't let me boot passed it. I have tried to get passed it in safemode but it did not work. I have tried to repair my hard drive and my permissions and reinstall osx lion but it didnt work.
I am aware there are others threads of my problem however they date back years ago and after trying their solutions it still does not work.Â
After using Time Machine to restore my hard drive from a backup, I can't get past the white loading screen with apple logo after system restart during restore process. Ive gone into disk utility and repaired hard drive - it's fine. So I know this is a software glitch. I've also tried resetting SMC & PRAM (whatever those mean). No success and i cannot get past the white loading screen.Â
I'm running Mavericks (latest) on a late 2009 iMac
So bare with me I want to be thorough so hopefully someone can help me out. My MBP (08) will not boot past the grey screen. The wheel just spins infinitely. I've read about it trying to figure it out.
1) I tried to boot from the install disc, when I do there are weird diagonal lines and the thing is unreadable. 2) I hooked it to my Mac Pro in target disc mode. I was able to get some of the information off, but it would eventually freeze up and freeze the finder on the Pro. It wouldn't verify the disc in disc utility. It would freeze if I tried to repair the disc. 3) It won't boot in safe mode or single user mode (CMD + S) 4) I tried removing the ram and switching it and using only one stick of ram (to make sure it wasn't a ram problem). 5) I tried to boot without the battery
Needless to say I am a bit frustrated. My applecare is long gone and there is no apple certified repair place anywhere near here. I've also noticed the thing is very hot. If nothing else I'd like to have an idea of what I should be expecting from the repair place.
My computer wouldn't quit an application, so to shut it down I Pressed the power button until it turned off. I've tried To turn it on with cmd-v and it said <5% free audit space.I tried rebooting with cmd-s and it still hasn't worked.
One minute my computer was fine, the next it froze. I did a hard reboot and now it won't boot past the blue screen, but I can move my mouse. Any idea what to do?
I apologize for the long message but I want to be as detailed as possible. My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel. Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMD+R+P+Option: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info. 4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.......
My computer died last night with each application not responding. I couldn't shut down normally so I held the power button to turn it off.Â
Next morning, I tried to boot the MacBook Pro and the boot process stalled at the grey screen with the Apple Logo and spinning wheel. I let it go for an hour and there was no change on the screen. Based on Apple's desk I ran Hardware diagnostics (extended with looping disabled) and got the following errorÂ
4HDD/11/40000000: SATA (0,0) Â
The screen shot is belowÂ
I ran this again with standard testing (no looping) and standard with looping and all gave the same results.Â
Info: MacBook Pro with Retina display, OS X Mountain Lion (10.8.2)
How to get my computer to turn on? I used it on Friday and had a normal shut down but when I went to turn it on yesterday, it gets the the gray screen with the apple and the loading bar and loads half way and then just stops and sits there until it eventually shuts itself off. I have tried turning it off and then back on and holding the D key but nothing happened.
