MacBook :: White Unibody Bottom Plate Colour Change?
Jan 25, 2010
The sleeve I keep my laptop in got wet tonight and now the bottom of my macbook is a weird grey/green/yellow colour. The sleeve is by logiix. I can't find the product online but the inside of the sleeve is micro-fibre-ish kind of material... I took some pictures but the quality is really bad, i took it from my cellphone.... I'm wondering if there's anyway to clean it up or do i have to live with it forever... Why does this happen? Might Apple cover it?
View 3 Replies
ADVERTISEMENT
Dec 10, 2010
I've just got a 13" MBP and I've noticed that around the middle of the bottom plate can be pressed in slightly. I can notice it most when I pick the laptop up by putting my hands underneath it and it bends inwards slightly. Does anyone else notice this on their MBPs?
View 6 Replies
View Related
Jun 15, 2012
I've got a MacBook Pro 15' from late 2011. Now, I noticed that when I take my macbook to move it, I can push in the bottom plate to the point where I notice it is touching internal components. When the macbook is in front of me (normal working position), the place where I can push it in is on the right side. Is this normal or should I bring it in?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 15, 2012
I am wondering if anyone knows what Apple charges to have the bottom plate of the MacBook Pro replaced. When I was at a store, an employee told me that it "might cost, like, uh, forty bucks," in a way that made me think he was just pulling that price out of his you-know-what. After searching eBay for that part and finding no auctions for less than $100, I assumed that Apple would charge something more like that.
It's really irritating that in order to replace two of my footpads, I must replace the whole bottom plate of the body. Apple is really trying to get people to buy the service plan, and then a new laptop when that runs out. Great for the environment. The whole unrepairable Retina Display MacBook debacle is just more proof of that.
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 7 Replies
View Related
Dec 11, 2010
I bought my macbook in June of 2010. My bottom plate is heavily scratched in the middle. I touched it and found out that it was bulging out a bit. Is it possible to get my bottom plate replaced in anyway?
View 9 Replies
View Related
Jun 6, 2010
After taking the back plate off to add ram, replace hardrive etc.. it appears it wont fit snuggly or level with the rest of the back any more.
The battery is almost like a spring when I release the catch, Im not sure it use to be like that.
http://gallery.me.com/ironduke74#100356
View 5 Replies
View Related
Jun 5, 2014
I have just bought new colour printer and do not want to waste money printer all documents in colour!!
Rather than having to remember to go into options and force to B&W each time, can I set it to default?
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.3)
View 3 Replies
View Related
Mar 26, 2010
Is it possible to purchase a replacement bottom cover for a 13" unibody MBP?
View 10 Replies
View Related
Aug 22, 2014
I'm not happy with the backdrop that appears on my display when my MBA starts up, before I log in to my user account. So I'm not referring to the wallpaper that you'd see on the desktop if all your applications were minimised or closed, but the background when you first switch the notebook on (visible when the theme tune is played, and the apple symbol shown). The MBA I purchased in September had a lovely background that was a subtle cross hatch of dark and medium grey. The newer model, purchased this June (after I destroyed the first one through water damage) has a boring, solid light grey background instead. I haven't been able to work out how to alter this in system preferences.
Info:
MacBook Air, OS X Mavericks (10.9.4), Purchased June 2014
View 2 Replies
View Related
May 26, 2010
The rubber bottom of my MacBook (unibody, late 2009 model) is coming off. Should I take off all the screws and try to reposition it? Also, it is under the one year warranty but not under the 90 day Apple tech support. Will Best Buy fix it for me?
View 16 Replies
View Related
Feb 26, 2009
Hey, my friends white MacBook has a crack on the bottom, I know this is quite common. But he was just wondering what he could do about it. Should he take it to Apple and see what they can do?
View 1 Replies
View Related
Apr 21, 2008
Everything is perfect except a white back light bleeding in a form of a line from above 3-4 inches from the bottom of the screen. Its only visible in solid black background.
View 24 Replies
View Related
Sep 11, 2009
Bought a Whitebook in August '08 and have noticed lately that the bottom of the screen (around the dock) is brighter than the rest. This extends to the top of the dock (which I have set at pretty small) but can be quite noticeable.
Has anyone heard of this or know any fixes? The screen has been calibrated but this isn't something that I could fix by re-calibrating.
View 2 Replies
View Related
Sep 12, 2010
I think that the unibody Macbook Pro would look sweet if it had white keys. I already own a wireless Apple keyboard, so I was thinking, would it be possible to swap the keys? Has anyone ever done/tried this?
View 7 Replies
View Related
Dec 6, 2010
When i still had my Unibody White MacBook a company by the name "The Lucky Labs" sent me this for review purposes. Let me know what you guys think of it. Just thought about sharing it with you guys and hopefully y'all would find it interesting
View 2 Replies
View Related
May 29, 2009
Macbook white updated by Apple this Tuesday. Comparing the hardward configuration with Macbook unibody(466), the new Macbook white may faster than 466. Anyone think Macbook unibody will have a update on hardware soon?P.S MacRumors Buyer guide also said "Recommendation: Buy only if you need it - Approaching the end of a cycle"
View 7 Replies
View Related
Jan 10, 2010
I have a 15" unibody pro, and when it's all cleaned and polished it looks absolutely stunning but quickly it becomes covered in smudges, fingerprints etc. It shows every little spec of dirt. It drives me insane, I'm constantly trying to clean it. It's so bad I'm considering selling it and buying a white one unless the white one is just as bad. From what I remember owning an older white macbook, it's wasn't as bad.
View 7 Replies
View Related
Feb 5, 2012
I am wondering how hard/expensive it would be to get my MacBook uprgaded to an SSD, i have heard they are much more reliable?!?!
Info:
MacBook, Mac OS X(10.6.2)
View 2 Replies
View Related
Feb 26, 2012
I have an early 2011 macbook pro and I was wondering if my macbook pro's model is the black or white unibody.
View 4 Replies
View Related
Feb 7, 2010
my macbook has small cracked in bottom base so i likes to change the bottom base so which is i did.. i have put black colour base on now its giving me problem which is
it does not turn on however the battery is charge so i hope there is not a problem in logic board
so whats went wrong guys is anybody have same problem as me?
View 4 Replies
View Related
Mar 3, 2010
Sorry for posting two consecutive posts but I thought this one should be discussed separately.
But does anyone know if the white unibody macbooks use the same 60% more color gamut displays as the 13" mbps do?
View 5 Replies
View Related
Jun 12, 2010
I have changed the colour of the dock to black and I was wondering where could I find somewhere to change my menu bar the same colour to.
View 1 Replies
View Related
Mar 11, 2010
I recently installed the Hitatchi 7k500 in my new White Unibody. Istat pro is showing a HD bay temp of 25 degrees C. When I had the original 250gb HD in, istat showed a HD bay temp and a HD temp. Now I only have a HD bay temp.
View 1 Replies
View Related
Jan 25, 2010
My two year-old was messing on our computer and managed to reverse all the colors. (black is white, red is green, etc.) I can't figure out how he did it and how to change it back. Apparently my back-up hasn't been working, I now find out. Ideas?
View 2 Replies
View Related
Dec 9, 2010
Just received the new 13" macbook air yesterday and today have noticed some very thin horizontal banding lines across the bottom portion of the screen.
Has anyone else noticed this, or check to see if your one has this problem.
It is quite subtle but it makes the icons on the dock look as if they have a card like effect through them.
Easiest to check if you make your screen wallpaper the dark grey colour.
On this the top part of the screen seems consistent, but at the bottom part there is very thin white horizontal lines. I tried updating the software, but it seems to be the same - looks like a faulty display may have to send back,wondering if it could be fixed with a software update.
The strange thing is black and dark colours do not produce the effect it only shows up on greys or medium contrast colours like blue.
View 6 Replies
View Related
Dec 8, 2009
I have a new Unibody White Macbook and can see that the palmrest may scratch if used whilst wearing a watch or if someone uses it wearing bracelets.
I live in the UK and wondered if there are any clear palmrest covers to prevent scratching? Either via ebay or otherwise?
View 2 Replies
View Related
Nov 7, 2010
Before I go into detail I have a Late 2008 Macbook White (Upgraded to 4GB RAM, 320GB HDD) so I would have had it two years this Christmas (2010) Over the last few months, on odd occasions the bottom row of keys completely stop working (by bottom row of keys I mean: Z X C V B N M < > ? and then fn ctrl alt and CMD on the row below. The space bar and right CMD work perfectly as does every other key on the keyboard.
Now this is where it gets really weird. I always thought this was a hardware issue (Loose ribbon connection etc, I just don't have the hours in the day to sit down and take it apart) until my friend gave me his old aluminium apple wireless bluetooth keyboard (the laptop sized one). The bottom row of my keyboard broke again whilst visiting him so we set up this aluminium keyboard of mine................
View 2 Replies
View Related
Sep 2, 2014
My computer has a problem on the screen. After half an hour of use strange white glare that remain in the bottom begins to appear. When disconnecting the unit from one day to the next, but these glosses disappear within a half hour of use reappear. Why does it happen? Will it be a failure of manufacture? The device is 2013 What should I do
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 1 Replies
View Related
Feb 28, 2012
When using white text on dark blue background in Word, how can I change the cursor from black to white so that it can be seen?
View 1 Replies
View Related
Jun 10, 2010
I have a ~2 month old 13" MacBook Pro (specs in sig). Several hours ago, I reapplied thermal paste to my old (pre-unibody) white MacBook and I am THRILLED with the results. I have a thread about it here: [URL] My white MB runs so cool, that I prefer using it, rather than my MBP.
I would replace the stock thermal paste with Arctic Silver Ceramique, but I am concerned about my warranty possibly being voided. Another reason that I wouldn't do this to my MBP is that my controlling mom will not let me do this to my new computer. If I can get any evidence from any of you that this will not adversely affect my computer or my warranty, I may be able to convince her to allow me to reapply the thermal paste.
View 24 Replies
View Related
