How do I set up my Macbook to not loose Internet connection when closing the laptop? I mean I want to "fold it" and still be on the NET with all my applications running and not disconnecting from my open websites.
View 6 RepliesA lot of times, when I close the flash intense web sites, my fans won't stop running until I go into activity monitor and force quit flash. This is very irritating and kills my battery life. I feel like I am constantly playing the sims 3 even if I am not doing anything. Also, are there varying levels of how much flash you're using? For example, if you're on youtube is that just as bad as being on macrumors and looking at flash based ad banners?
View 3 Replies View RelatedI have a mid-09 13" MBP. I just bought a display (dell U2311H), wireless apple kb and magic trackpad, with the intention to use just the external display and kb/trackpad, and stow my MBP away to save some space. Everything works fine when my MBP's lid is open. But once it is closed (or nearly closed), WiFi disconnects. I don't think it has anything to do with my wireless router, but more to do with some MBP setting.
View 6 Replies View RelatedI recently set up my new macbook pro with an Apple Cinema Display. The setup is great except that my wifi connection only works when my MBP is open. The second I close the screen the connection stops working. It's not a proximity issue since it works just fine when it's open.
View 7 Replies View RelatedI have an Mac 24 desktop and my wifi is activated. My sister is visiting and I gave her my password to use the wifi, but every time she closes the lid, then opens it again she has to request the wifi again. Is there a setting I must change or she must change to keep the wifi activated?
View 3 Replies View RelatedI have a pretty old Titanium Mac Book that runs OS 10.3.9. It's a moderately slow machine, but still works- and although I realize that it won't be able to stream video or anything, I figure it would work for email, and basic web browsing- But I'm wondering if it's going to be compatible with any new products such as a USB wifi antenna - because the room where I want to use it won't alow for an ethernet connection- Also, will the old 10.3.9 OS allow me to connect wifi to the newer airport extreme base stations?
Info:
MacBook, Mac OS X (10.3.x)
I have a house that is not ideal for wifi. In particular, my office is an extension off the kitchen which has a solid brick wall between it and the rest of the house. Through 2 airport extremes, i get great wireless N signal everywhere in the house except this office. So, i added a 'N' airport express at the base of the stairs to this office and 'extended' the network.
So, i have 2 macbook pros up here. One is running on batteries, sitting on my desk, lid open. It is showing a rate of 108, signal -66 and noise -88 in the advanced wireless clients section of the airport express which it is getting it's signal from.
The next is closed and connected to a LED 24" cinema display. It is right next to the other MBP. It is showing a rate of 41, signal -80 and noise -93.
Why such a huge difference? Would it be because the lid is closed, it is connected to the display or a faulty macbook?
Can a MacBook Pro be running while closed and controlled by an iPad 3?
Info:
iPad 2, Mac OS X (10.7.3)
im new to macs and have just bought myself a mac book pro a week ago. its been amazing but yesterday i closed my laptop and then the flashing light stayed white. i opened it and it froze for a few seconds. it is still running when the lid is closed. What do i do?
View 6 Replies View RelatedI've just bought a Dell 2209WA. I'm struggling a little with colour profiles and monitor setting, not sure which is the best thing to do. I'll be working with some things that need to be printed out and some that are for web only. So I'm guessing I'll need to use different colour profiles depending on what I'm doing, is that right? Can anyone recommend some to me?1. Is it possible to close my macbook pro yet still have it working through my monitor? I have a wireless keyboard so it'd be preferable if I close close the mac and run the monitor from it.
View 3 Replies View RelatedI just got a MBP 13" and I want to run some video converting programs while the lid is closed (I don't like the idea of leaving my laptop's screen open at night) but I can't disable sleep mode while the lid is closed.
View 9 Replies View RelatedI'm running an Intego X6 full scan right now, but something is amiss:
1. Activity Monitor shows 19 packets in/sec, 22 packets out/sec, currently at 26024 packets in and 24996 out since rebooting maybe 10 minutes ago)
2. iStat shows 4k in/out per sec
3. My router's activity light incessantly blinks
4. My router won't light up at the initial login, so the issue only happens with my current user account
When disabling all internet activity through Intego's firewall, my router also stops. Amusingly, Activity Monitor continues to show packets being sent and received. (I didn't see anything in Activity Monitor that would show me which process(es) are using the network as well...)
I can't seem to find any PID or process names out of the ordinary, but usually there should be no activity when there's no activity.
I do keep OS X updated as often as possible, but that doesn't mean something wicked this way comes...
Are there apps I can use that will tell me what process is sending these mystery packets?
just received my new MP and noticed the same thing with the 08 Modell which is that the door sits slightly offset on the case meaning theres a little gap about 0,5mm between the closed door and the outer case.
Second my fans "boostA & boostB" are spinning at 1100rpm at idle I thought they should normally idle at around 800rpm? (I read at least)
How do I stop audio tracks from websites running continuously while Safari is open? I have tried deleting history and cookies. I have rebooted computer and still the audio newsclips play.
Info:
MacBook Air, Mac OS X (10.7)
2011 MacBook Air running Yosemite
The bluetooth badly interferes with the wifi - with bluetooth on, wifi download is around 1mbps; without bluetooth it instantly jumps to 10+mbps. Problem is - I need to work on an external monitor with the bluetooth keyboard and trackpad.
Have tried altering wifi channels etc.
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
Recently i've added a Panasonic CRT to my setup running dual screen on my iBook G4 (latest rev.) Just wondering if it's safe to run lid closed mode on it. I know that it's capable (even though it's not supposed to be.) Would i run into severe problems if I did this as far as screen damage? I'm not sure if the heat comes through the keyboard and would create pixel problems.
View 2 Replies View RelatedSo I have an airport extreme. I am planning on getting an airport express, to use exclusively for airtunes. I have a Palm Pre (it's WiFi is only b/g not N). If I use the Palm Pre on my airport extreme, it lowers my wifi connection to G speeds as opposed to N. Can I make the airport express run on G only but still extend the extreme's wifi (running on N)?
View 2 Replies View RelatedWhy does my iMac continue to loose wifi connection? My PC setting right next to it does not have the problem. I'm trying to do the switch to iMac but having a tough time. My 1986 DOS PC with 20 Meg hard drive sure was simpler.
Info:
iMac, Mac OS X (10.7.4)
So tomorrow I'm going to be getting a Powerbook G4 from a friend. He says there are two problems with it.
1. The Graphics. I haven't seen it personally, but he says every time the laptop starts up, the display has a bunch of parallel vertical lines running down it. Is this a hardware issue, and is it easy to replace? Or can an update fix it? I wonder because isn't the integrated graphics mounted on the logic board?
2. The WiFi Card. I remember the day he got it, we both say the WiFi worked like a charm. One day, it pooped out on us. Now, the only way for internet is by ethernet. Did something possibly unhook from it, or is it a bad card? Once again, a possible update for it?
I won't know for certain until I get this laptop tomorrow. I will post updates when I can physically check it out.Also, this laptop is an older one, so no warranty or AppleCare on it. It is also running Leopard, but I doubt it is updated to the latest.
My 2010 15" MBP has constant Wifi dropouts, sometimes minutes at a time. Sometimes I have to reconnect. Yet it gets 4 bars. My MacBook never had these problems. It's generally slower, too. It's now useless for online video like Hulu. Anyone else seeing this? I wonder whether it's hardware (e.g. they moved the antenna, and/or because of the metal case) or software/drivers? I'm going to submit feedback after input from ya'll.
View 24 Replies View RelatedMacBook. 2Ghz Intel Core Duo. OS Snow Leopard 10.6.6. I'm running a 2006 MacBook with Snow Leopard. A few months back it started dropping wifi connection. Airport would show no connection but would list my network along with others in my building. If I tried to connect with my WPA password it would just time out. At this time I was running Leopard.
Since then I've done a few things.Tried running the Netgear router with no encryption at all (same thing happens). Will lose connection and then time out trying to connect
I've tried the MacBook in a coffee shop with wifi access and at my parents (same NetGear router) and at my new apartment with a horrible Orange Livebox.
Taken the MacBook in to see the genius bar at Glasgow Apple store. Worked fine for them, but I explained it was intermittent but we could not force it to fail. I'm sure if it ran for an hour it would.
At present if I have the MacBook in the living room (where the Livebox router is situated) its fine and wont drop connection. If I walk some 5m to my bedroom it will work for approximately half and hour and then lose it. A few days ago I bought the Snow Leopard upgrade and installed it last night. MacBook runs a hell of a lot faster (yay!) but moving it away from the router and its dead as disco in half an hour.
So to clarify, the MacBook has been tested on 4 wifi networks/ locus with same issue. iPhone, Xbox 360 and PS3 all have no issues with dropping connection no matter where they are in the apartment.
Apartment is a new build and its walls are not made out of lead or kryptonite. Is this a hardware issue rather than software? When updating to Snow Leopard it was an update to the existing OS of Leopard not a clean install.
AIRPORT says the following in System Profiler.
Software Versions:
Menu Extra:6.2.1 (621.1)
configd plug-in:6.2.3 (623.2)
System Profiler:6.0 (600.9)
Network Preference:6.2.1 (621.1)
AirPort Utility:5.5.2 (552.11)
How do I use my macbook pro lid closed?
Info:
MacBook Pro, iOS 5.0.1
I have a Macbook running Leopard and an iMac running Tiger. I am looking to upgrade Leopard to Snow Leopard and Tiger to Leopard. If I were to purchase Snow Leopard and install it on the Macbook, would I then be able to use the copy of Leopard that came with the Macbook on the iMac? I am not trying to use 2 copies of the same thing on different machines, I just want to put a new os on one machine and move the existing one to another.I am reluctant to purchase the Mac Box Set version of Snow Leopard for the iMac because I do not want or need iLife and iWork.
View 2 Replies View RelatedMy Macbook Pro (from mid-2010) has recently started running EXTREMELY slowly, and the fan continuously runs loudly. From other posts, I have checked my activity monitor to see if any process is taking up a lot of the CPU % and have found that nothing seems high, except the kernel_task which, from what I understand, is supposed to be high. I have also attempted to reset the SMC which didn't fix the problem either. I have taken my computer to the genius bar 3 times now, and they keep telling me nothing is wrong (because it works perfectly there), but when I get it home the fan comes back on, and everything runs slowly.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
With external monitor attached, Macbook goes into sleep mode when I close the lid, even when its AC attached. Any idea how to disable that so I can run with lid closed on VGA monitor?
View 1 Replies View RelatedI have a late 2008 unibody macbook connected to a brand new Samsung monitor via a displayport to DVI cable and everything works great until I shut my macbook. The external monitor continues to work fine but my wireless seems to lose connection, my desk is approximately 15 feet from a wireless repeater and Airport appears to have a full signal but it will act as if there is a bad connection until I open my macbook back up and then the internet works fine.
I was talking to a friend and he mentioned that some displayport to DVI cables do not have sufficient shielding therefore interfering with the wireless signal but if that was the issue it should be effecting the wireless signal at all times, not just when the macbook is closed.
On every MB I've used since they first came out, you could hook the audio and video up, close the lid, and if it went into sleep mode, the Apple Remote would trigger a "wake up" for mediacenter purposes on a TV/stereo. My SR MB w/ 10.5 doesn't do it. As soon as the lid closes, it's asleep no matter how I toggle the view between screen and external port. Front Row doesn't wake it anymore. Anyone else having this problem? I wanted to find out before calling and asking.
View 15 Replies View RelatedI am using my MacBook with the lid closed, mainly as a desktop. I plan to run Handbrake to rip DVDs. It takes hours and fan is on constantly. Will the heat dissipate better with the lid closed or open? The vent seems to be on the back and I can feel the heat venting out with the lid closed.
View 24 Replies View Related