MacBook :: Restoring To Factory - Cannot Get Disc To Boot?
Mar 22, 2009
I'm trying to restore my Macbook (white) to factory defaults and I can't get the disk to boot and am having trouble. Whenever I load the disk in and restart holding c, the disk spins and then spits out and the computer boots to Mac OS X (Leopard). I've reset the nvram, the pram, repaired permissions with no success. I used to have Bootcamp installed, but I read that may cause problems so I uninstalled it and it still won't work. These are the grey disks that came with the computer when I bought it new a few months ago so I know they work. They say Mac OS X Disc 1/Disc 1. Any suggestions to getting the disk to boot instead of spit out?
View 10 Replies
ADVERTISEMENT
Apr 5, 2012
How I would go about restoring my mac back to factory settings, my mac didn't come with a disc.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Jan 18, 2010
I just bought and installed snow leopard and when i did i restored to factory settings so i could start fresh. However i wanted to restore my itunes back to how it was, but i can seem to work it out. If someone could tell me an easy way to do
View 1 Replies
View Related
Sep 16, 2010
I have a black macbook and want to do a full wipe and start over fresh. I have the grey install discs as well as my Snow Leopard upgrade disc. I got everything off and ready to start over. What do I need to do?
View 2 Replies
View Related
Dec 18, 2010
So low and behold, my macbook box was thrown out (I don't want to talk about it), with my restore disks in it. Can I factory restore my Mac without them? I just purchased Snow Leopard tonight if that helps at all?
View 3 Replies
View Related
Feb 1, 2012
I have just bought a new MacBook Pro. When I got it I connected my time machine to remove my photos and music. My question is how do I restore my mac to its original settings, because there is too many things I don't want on it from my time machine? And my laptop did not come with the Lion installer disc. What should i do?
Info:
MacBook Pro
View 7 Replies
View Related
May 21, 2012
I have an original (2007) MacBook Pro that I want to sell.Before I sell it, I'd like to erase everything that I have in the MBP and restore it to factory settings. I don't have my Leopard discs, they are in storage.
Info:
MacBook Pro 15, Mac OS X (10.6), 2.16GHz, 2G Ram, 120GB Serial ATA Drive, 2-GRaids FW800s, FCP6
View 2 Replies
View Related
Jun 20, 2012
my grandfather gave me his Macbook pro but he lost the dics it comes with it, i want to restore the macbook to factory mode , how do i do it and what do i have to buy if i need anything?
Info:
MacBook Pro, i believe this macbook is from 2009
View 1 Replies
View Related
Jul 3, 2012
I am working on restoring my Macbook to its factory settings. I am planning to "wipe" my computer clean before i install 10.6 (snow lepord) and then later install mac lion.
i know that i need the installation discs to accomplish such a task. do the disks have to come from my specific operating system? can i use a disk from an older operating system (such as 10.4)
Info:
MacBook, Mac OS X (10.5.8)
View 1 Replies
View Related
Jun 13, 2012
Whenever I update to the new operating system when it is released next month, is it possible to update while restoring to factory defauts at the same time?
Info:
MacBook Pro, Mac OS X (10.7.2)
View 1 Replies
View Related
Jul 28, 2010
I migrated my old MBP to my new one last night. Everything was good except that I could not log onto my schools network. I have had this problem since my old MBP. I figured that by migrating my 'Preferences' I migrated the problem along with. After many attempts at many work-arounds, I decided that I will just start fresh.
Here is what I have done:
1) I popped in the factory disc and held 'C'
2) Utility ->Disk Utility ->Erase. I selected the Hard drive. The one in the top of the hierarchy. This also cleared the name of 'Macintosh HD' to 'Untitled'.
Now I did not realize that I was supposed to rename my hard drive "before" clicking erase. This is not a big deal, but was just wondering if I will be able to change that later? Do you think that when I go to use migration assistant this next time, if I only opt to migrate "Files and Folders" and "Applications" this will most likely solve my network configurations problem? That is, it will leave my network settings at the factory defaults so I start fresh?
View 3 Replies
View Related
Aug 1, 2009
Im selling my macbook pro and am trying to restore it to factory settings. I have inserted the "install disc" many times. However, my laptop is never able to start up. It alternates between a black and grey (no apple or wheel) screen. I've tried holding down the "C" key while rebooting..that didnt work. I've tried clicking restart when it instructs me to...that didnt work I've tried going to system preferences --> startup disk --> clicking the install drive and it still didnt work. What can I do? My mac can start up and work perfectly fine without the disk, its just that i need to restore it to factory settings.
View 2 Replies
View Related
Jun 7, 2012
I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet. But it is failing telling me that my network is very slow while I used the best network in my area. How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro? Or is it possible to recover the erased OS X Lion without or with external disc?
Info:
MacBook Pro, Mac OS X (10.7.4), Mac OS X Lion
View 5 Replies
View Related
Dec 29, 2008
Can this be done without reformatting? I am selling the laptop and want all my personal data off it.
View 5 Replies
View Related
Jun 18, 2012
Mac Mini 1.1 Core Duo 1.66Ghz desktop computer that I purchased in 2006ish. I have had several problems with this computer and would like to sell it but would like to restore it to factory settings to try to restart with it as well as deleting everything on it.What do I need for this and how can I do it?
Info:
Mac mini (Late 2006)
View 5 Replies
View Related
Apr 6, 2010
I have a power G5 dual processor with mac os x 10.5.8 leopard installed. I need to erase it to how it was when I got it. I do not have any disks, since I bought it refurbed from a local guy. I need to delete my admin account (yes I do have password) and create a new admin account. I dont want to lose any applications or software on the comp, such as the iMovie iDVD etc... but I want to get rid of anything I downloaded from the internet as well as my personal files I have saved. It seems like a lot of my stuff is all scattered around. How can I restore it back to original clean install, keep my apps and software, but delete my personal files and downloads?? I also have my 500 GB hard drive split into 2 partitions, and an airport card installed etc..
View 1 Replies
View Related
Nov 1, 2008
ive just been given a G3 powerbook from a friend in sweden and want to completely restore it,as i cant change the language from swedish to english!I spoke to somebody whilst out there and he confirmed that i need to reinstall the os x software compatible with it (10.3.9)which i guess is kinda old. I have a new imac with leopard,and also have tiger but when i inserted the discs it still came up in swedish?
View 3 Replies
View Related
Feb 22, 2012
So I recently purchased a MacBook Pro and used Migration Assistant to transfer my files. I realized after that I should have transfered right at the beginning when I had the chance for Setup Assistant, because I have a lot of files that require permission from my other user account on my old MacBook. I went to Disk Utilities, and there were two options to "Erase Free Space", some Toshiba thing and Macintosh HD (I am assuming was the hard drive that was transferred). I pushed "Erase Free Space" and closed down disk utility, but it looks like it didn't delete my hard drive because all the applications and files are still there. I am now reinstalling OS X Lion hoping it will bring me back to that first screen where it askes if i want to transfer from another computer. Am I doing this right? I feel like I'm gonna mess something up and i've already wasted 5 hours already trying to fix my primary mistake of using Migration.
View 1 Replies
View Related
May 7, 2012
I have a late 2009 iMac that came with Snow Leopard, but has been upgraded to Lion via the App store, so I have no recovery discs. I tried reinstalling Lion with the built in recovery, but it did not wipe HD clean. I know I need to erase the HD in Disc Utility, but then I won't have a way to reinstall Lion.
Info:
iMac, iOS 5.0.1
View 11 Replies
View Related
Aug 18, 2009
So my mom just bought an iMac from her friend's mother, and I'm trying to restore it to factory settings using the Installation disks that came with my MacBook Pro. I just inserted the discs and clicked "Install Mac OS X" and then it gives me a "Restart" button, but I cannot restart it without putting in the Password which I do not have. Is there another way to do this?
View 4 Replies
View Related
Apr 2, 2012
I have a Mac mini from late 2010 that I am going to try to sell on eBay. Wondering what the most effective way to wipe all the data on it would be. I still have the disks that came with it but I'm wondering if there's something I should do to the hard drive before I use them to restore to factory defaults.
View 1 Replies
View Related
Apr 8, 2012
fully back up and return to factory settings so I can set up again in Lion (from Leopard).
Info:
MacBook Pro
View 1 Replies
View Related
Jun 2, 2014
After reformating de disc do i have to insert the disc with the os that came with the mac originaly or i can start it directly from the back up made?
Info:
MacBook Air, OS X Mavericks (10.9.2)
View 5 Replies
View Related
Jan 23, 2010
So I had to have my macbook pro HDD replaced (applecare) and I made a disc image backup beforehand and put it on my external HDD.
I just picked it up from the apple store today, and called tech support for help with restoring it from the disc image. I was instructed to put the install disc in and boot holding the 'c' key, then go to disc utilities, to the restore tab, find the image as a source, and then drag the internal HDD volume to the destination field. It didnt work, so I was transferred to a senior advisor, who told me to do the same thing. The only time it would work is if I dragged the indented one that reads "Macintosh HD" instead of the one with the GB size and brand name. The senior advisor told me that it wouldnt work for him either (dragging the volume) and dragging the macintosh HD isnt how it's supposed to work, so he couldnt guarantee a proper result. It didnt work anyway. I dont remember the error message.
So he starts telling me that the best option might be to install the operating system from the discs, update to 10.5.8, and then just copy the "user" folder and then move everything where it is supposed to be. I wasnt particularly impressed and I'm not convinced that it has to be that difficult or time consuming.
View 4 Replies
View Related
Dec 7, 2009
I'll finally be selling my circa-2005 iMac to my sister and buying one of the new ones. But I was wondering if anybody could point me to a really simple tutorial on how to restore/clean install my computer. I know how to get all my stuff off of my iMac and onto the new one. But I cannot locate the Tiger disc and only have the iMac install discs. Can I do a clean install with just these discs?
View 5 Replies
View Related
Nov 27, 2010
I was wondering how would I do a system restore on my Leopard upgraded (from a Tiger OS) iMac? I have done several google searches and i keep getting various answers (which there are different ways but I just want to restore my iMac to factory setting) Would I use my leopard or tiger disk, and how would I go about doing a system restore? What I wanted to do was do a system restore on my mac and upgrade to Snow Leopard. There are alot of scattered unimportant photos, movies, and games on my mac and it feels like a system restore would save me alot of time.
View 1 Replies
View Related
Sep 5, 2014
I've had my TIme Capsule for a few years now. Last year I decided to self upgrade the internal HDD to 3TB to actually fit back-ups from my two mac's at home. On my MBP the boot drive failed. It's unfixable unfortunately. how to restore full system on a new HDD on my MacBookPro from TimeCapsule, after boot drive failure?
how to connect the laptop with clean/ empty HDD to MBP and make it boot and install it all from Time Capsule. Moreover, I am not sure how to connect it to Time Capsule, so that it doesn't take 3 days to restore.There is both an ethernet port as well as USB 2.0 one too.
That 'old' boot driveis still barely running, I wanted to hand copy at least my iPhoto Library of 110GB in size, but it just keeps crashing, as the file is so big. I mean, I should have it all back-ed up on TimeCapsule,
Info:
TImeCapsule, OS X Mavericks (10.9.4), Seagate Agent GoFlex 1.5TB
View 6 Replies
View Related
Oct 24, 2010
My 13" MBP (Spring 2010) will NOT boot from an OS X Snow Leopard disc (disc or USB bootable). I get a Kernal panic every time with the window shade and 20 languages telling me to restart my computer.
View 2 Replies
View Related
Apr 10, 2010
My MacBook 13" which was the current model when I bought it in September '08 decided after a normal shut down to not boot up the next time I tried. It gets as far as loading the grey apple symbol and then gets no further (no loading cog etc.
Naturally my first thought was to try to repair from my OSX install disc but when I booted from this the same problem occurred (the grey apple symbol, no further). The disc is definitely recognised by the disc drive and is displayed when I hold the option key on startup. I also tried using a friends OSX disc and the same problem occurred so I'm assuming it can't be the disc.
I have tried booting in safe mode, single user mode & verbose mode, none of which work although I am able to see where the script gets to in a safe mode boot by using the option that shows this .
The weirdest thing is that I have dual-boot set up with Ubuntu on my macbook and I can still boot to ubuntu fine, also all linux live discs I have tried in order to investigate the hard drive have had no trouble booting.
View 2 Replies
View Related
Jun 6, 2012
Disk utilities says I need to boot from the install disc, but I can't get my computer to boot up from the install disc. I tried holding down the C key (the letter C), both lower and upper case, but it still boots off the hard drive. Is there a special way I am supposed to initiate the reboot? I just hit the power button to bring up the little window that has buttons for Restart, Sleep, Cancel, and Shut Down. So I held down the C key and clicked the restart button. I also held the C key till the sign-on menu came up. I am running Leopard.
View 6 Replies
View Related
