So low and behold, my macbook box was thrown out (I don't want to talk about it), with my restore disks in it. Can I factory restore my Mac without them? I just purchased Snow Leopard tonight if that helps at all?
View 3 RepliesI just bought and installed snow leopard and when i did i restored to factory settings so i could start fresh. However i wanted to restore my itunes back to how it was, but i can seem to work it out. If someone could tell me an easy way to do
View 1 Replies View RelatedI have a black macbook and want to do a full wipe and start over fresh. I have the grey install discs as well as my Snow Leopard upgrade disc. I got everything off and ready to start over. What do I need to do?
View 2 Replies View RelatedI have just bought a new MacBook Pro. When I got it I connected my time machine to remove my photos and music. My question is how do I restore my mac to its original settings, because there is too many things I don't want on it from my time machine? And my laptop did not come with the Lion installer disc. What should i do?
Info:
MacBook Pro
I have an original (2007) MacBook Pro that I want to sell.Before I sell it, I'd like to erase everything that I have in the MBP and restore it to factory settings. I don't have my Leopard discs, they are in storage.
Info:
MacBook Pro 15, Mac OS X (10.6), 2.16GHz, 2G Ram, 120GB Serial ATA Drive, 2-GRaids FW800s, FCP6
my grandfather gave me his Macbook pro but he lost the dics it comes with it, i want to restore the macbook to factory mode , how do i do it and what do i have to buy if i need anything?
Info:
MacBook Pro, i believe this macbook is from 2009
I am working on restoring my Macbook to its factory settings. I am planning to "wipe" my computer clean before i install 10.6 (snow lepord) and then later install mac lion.
i know that i need the installation discs to accomplish such a task. do the disks have to come from my specific operating system? can i use a disk from an older operating system (such as 10.4)
Info:
MacBook, Mac OS X (10.5.8)
I'm trying to restore my Macbook (white) to factory defaults and I can't get the disk to boot and am having trouble. Whenever I load the disk in and restart holding c, the disk spins and then spits out and the computer boots to Mac OS X (Leopard). I've reset the nvram, the pram, repaired permissions with no success. I used to have Bootcamp installed, but I read that may cause problems so I uninstalled it and it still won't work. These are the grey disks that came with the computer when I bought it new a few months ago so I know they work. They say Mac OS X Disc 1/Disc 1. Any suggestions to getting the disk to boot instead of spit out?
View 10 Replies View RelatedWhenever I update to the new operating system when it is released next month, is it possible to update while restoring to factory defauts at the same time?
Info:
MacBook Pro, Mac OS X (10.7.2)
I migrated my old MBP to my new one last night. Everything was good except that I could not log onto my schools network. I have had this problem since my old MBP. I figured that by migrating my 'Preferences' I migrated the problem along with. After many attempts at many work-arounds, I decided that I will just start fresh.
Here is what I have done:
1) I popped in the factory disc and held 'C'
2) Utility ->Disk Utility ->Erase. I selected the Hard drive. The one in the top of the hierarchy. This also cleared the name of 'Macintosh HD' to 'Untitled'.
Now I did not realize that I was supposed to rename my hard drive "before" clicking erase. This is not a big deal, but was just wondering if I will be able to change that later? Do you think that when I go to use migration assistant this next time, if I only opt to migrate "Files and Folders" and "Applications" this will most likely solve my network configurations problem? That is, it will leave my network settings at the factory defaults so I start fresh?
Im selling my macbook pro and am trying to restore it to factory settings. I have inserted the "install disc" many times. However, my laptop is never able to start up. It alternates between a black and grey (no apple or wheel) screen. I've tried holding down the "C" key while rebooting..that didnt work. I've tried clicking restart when it instructs me to...that didnt work I've tried going to system preferences --> startup disk --> clicking the install drive and it still didnt work. What can I do? My mac can start up and work perfectly fine without the disk, its just that i need to restore it to factory settings.
View 2 Replies View RelatedMy iMac has become a little unstable and I want to wipe everything and start again - a factory reset.
Seeing as it didn't come with any start up discs, is there a way to do with without disks?
I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet. But it is failing telling me that my network is very slow while I used the best network in my area. How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro? Or is it possible to recover the erased OS X Lion without or with external disc?
Info:
MacBook Pro, Mac OS X (10.7.4), Mac OS X Lion
My computer HD failed and I cant start my macbook at all. The computer boots and shows a question mark on a folder and the HD clicks so I assume thats the problem. I'm getting ready to order a new one and I can't find my original install disks. Can I do a fresh install of the OS on a new HD with just the Leopard install disk? I have a set of Mac Pro install disks, but don't know if they will work (missing divers?).
View 6 Replies View RelatedI'm running on an iMac and my system recently crashed. I went through the whole process of trying to reboot in Safe mode, then running Disk Utility, then 'fsck'. Looks like my drive should work, but it still freezes upon startup.
So. My last option is to reinstall OS X from my install disk. Not a big deal since I've been running Time Machine backups on an external drive. Here's the problem: my install disk is 10.4.10 but my backups are from Leopard. I upgraded to Leopard online without purchasing a disk.
Is there any way to do a full system restore from my Time Machine backup without the 10.5 disk?
Can I reinstall 10.4, then upgrade to Leopard (or Snow Leopard), and then run my full restore? Would I then need to clone my system to a separate drive before restoring to my internal drive?
Can this be done without reformatting? I am selling the laptop and want all my personal data off it.
View 5 Replies View RelatedI just replaced my HD and I want to restore from my Time Capusle. However, my install disks for my MacBook Pro (late 2008) are Leopard, and I was using Lion.
Do I restore first from TC, or install Snow Leopard first (then I can't use Set-up Assistant)?
Info:
MacBook Pro (+7 previous Macs), Mac OS X (10.7.2)
Mac Mini 1.1 Core Duo 1.66Ghz desktop computer that I purchased in 2006ish. I have had several problems with this computer and would like to sell it but would like to restore it to factory settings to try to restart with it as well as deleting everything on it.What do I need for this and how can I do it?
Info:
Mac mini (Late 2006)
I have a power G5 dual processor with mac os x 10.5.8 leopard installed. I need to erase it to how it was when I got it. I do not have any disks, since I bought it refurbed from a local guy. I need to delete my admin account (yes I do have password) and create a new admin account. I dont want to lose any applications or software on the comp, such as the iMovie iDVD etc... but I want to get rid of anything I downloaded from the internet as well as my personal files I have saved. It seems like a lot of my stuff is all scattered around. How can I restore it back to original clean install, keep my apps and software, but delete my personal files and downloads?? I also have my 500 GB hard drive split into 2 partitions, and an airport card installed etc..
View 1 Replies View Relatedive just been given a G3 powerbook from a friend in sweden and want to completely restore it,as i cant change the language from swedish to english!I spoke to somebody whilst out there and he confirmed that i need to reinstall the os x software compatible with it (10.3.9)which i guess is kinda old. I have a new imac with leopard,and also have tiger but when i inserted the discs it still came up in swedish?
View 3 Replies View RelatedSo I recently purchased a MacBook Pro and used Migration Assistant to transfer my files. I realized after that I should have transfered right at the beginning when I had the chance for Setup Assistant, because I have a lot of files that require permission from my other user account on my old MacBook. I went to Disk Utilities, and there were two options to "Erase Free Space", some Toshiba thing and Macintosh HD (I am assuming was the hard drive that was transferred). I pushed "Erase Free Space" and closed down disk utility, but it looks like it didn't delete my hard drive because all the applications and files are still there. I am now reinstalling OS X Lion hoping it will bring me back to that first screen where it askes if i want to transfer from another computer. Am I doing this right? I feel like I'm gonna mess something up and i've already wasted 5 hours already trying to fix my primary mistake of using Migration.
View 1 Replies View RelatedHow I would go about restoring my mac back to factory settings, my mac didn't come with a disc.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I have a late 2009 iMac that came with Snow Leopard, but has been upgraded to Lion via the App store, so I have no recovery discs. I tried reinstalling Lion with the built in recovery, but it did not wipe HD clean. I know I need to erase the HD in Disc Utility, but then I won't have a way to reinstall Lion.
Info:
iMac, iOS 5.0.1
So my mom just bought an iMac from her friend's mother, and I'm trying to restore it to factory settings using the Installation disks that came with my MacBook Pro. I just inserted the discs and clicked "Install Mac OS X" and then it gives me a "Restart" button, but I cannot restart it without putting in the Password which I do not have. Is there another way to do this?
View 4 Replies View RelatedI have a Mac mini from late 2010 that I am going to try to sell on eBay. Wondering what the most effective way to wipe all the data on it would be. I still have the disks that came with it but I'm wondering if there's something I should do to the hard drive before I use them to restore to factory defaults.
View 1 Replies View Relatedfully back up and return to factory settings so I can set up again in Lion (from Leopard).
Info:
MacBook Pro
I have a Macbook Pro Intel Core Duo (first generation of MacBook Pro released). I run OSX 10.6.5. My disk utility has detected a problem and says I need the install disks that came with the computer. Called apple and they said I could reboot from snow leopard or the upgrade.** Problem is that I don't have any disks with me except those that came with my brand new iMac. Can I use those to reinstall the system? Is there any other way?
**They also said that after 2007, the install disks that come with computers are keyed to that specific computer so I "might" not be able to use the disk to repair.
Additionally, and I don't know if this makes a difference but I have the airport/time capsule which backs up my computer for easy restore.
Purchased a used macbook aluminum did not come with disks but i have the discs of my mac mini 2010 aluminum.I tried erasing and installing but it did not work.It says i cannot mac osx on this computer.
View 2 Replies View RelatedEach time I put in the installation disk for Office Mac 2008, my Macbook tries to read it, but will eject it within 15 seconds without allowing me to download. Is something wrong with my DVD drive? My Macbook is less than 1 year old. Not getting this at all!!
View 4 Replies View RelatedI purchased my MacBook in August 2006 and it came with 10.4.X and I have been fine with using that OS. However, just recently (august 08) my sister purchased another Macbook. Her Macbook came with the 10.5.4 install disks. I tried to put these into my macbook just to see if for some reason apple was nice enough to allow people who purchased new macbooks to update all other macbooks they owned. However, it does not appear to work that way. Is there any way I can get the 10.5.4 Install disks to work on my macbook (purchased august 06) that is currently running 10.4.11?
View 3 Replies View Related