I have just bought a new MacBook Pro. When I got it I connected my time machine to remove my photos and music. My question is how do I restore my mac to its original settings, because there is too many things I don't want on it from my time machine? And my laptop did not come with the Lion installer disc. What should i do?
Info:
MacBook Pro
I just bought and installed snow leopard and when i did i restored to factory settings so i could start fresh. However i wanted to restore my itunes back to how it was, but i can seem to work it out. If someone could tell me an easy way to do
View 1 Replies View RelatedI have an original (2007) MacBook Pro that I want to sell.Before I sell it, I'd like to erase everything that I have in the MBP and restore it to factory settings. I don't have my Leopard discs, they are in storage.
Info:
MacBook Pro 15, Mac OS X (10.6), 2.16GHz, 2G Ram, 120GB Serial ATA Drive, 2-GRaids FW800s, FCP6
I am working on restoring my Macbook to its factory settings. I am planning to "wipe" my computer clean before i install 10.6 (snow lepord) and then later install mac lion.
i know that i need the installation discs to accomplish such a task. do the disks have to come from my specific operating system? can i use a disk from an older operating system (such as 10.4)
Info:
MacBook, Mac OS X (10.5.8)
Im selling my macbook pro and am trying to restore it to factory settings. I have inserted the "install disc" many times. However, my laptop is never able to start up. It alternates between a black and grey (no apple or wheel) screen. I've tried holding down the "C" key while rebooting..that didnt work. I've tried clicking restart when it instructs me to...that didnt work I've tried going to system preferences --> startup disk --> clicking the install drive and it still didnt work. What can I do? My mac can start up and work perfectly fine without the disk, its just that i need to restore it to factory settings.
View 2 Replies View RelatedI was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet. But it is failing telling me that my network is very slow while I used the best network in my area. How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro? Or is it possible to recover the erased OS X Lion without or with external disc?
Info:
MacBook Pro, Mac OS X (10.7.4), Mac OS X Lion
Mac Mini 1.1 Core Duo 1.66Ghz desktop computer that I purchased in 2006ish. I have had several problems with this computer and would like to sell it but would like to restore it to factory settings to try to restart with it as well as deleting everything on it.What do I need for this and how can I do it?
Info:
Mac mini (Late 2006)
ive just been given a G3 powerbook from a friend in sweden and want to completely restore it,as i cant change the language from swedish to english!I spoke to somebody whilst out there and he confirmed that i need to reinstall the os x software compatible with it (10.3.9)which i guess is kinda old. I have a new imac with leopard,and also have tiger but when i inserted the discs it still came up in swedish?
View 3 Replies View RelatedSo I recently purchased a MacBook Pro and used Migration Assistant to transfer my files. I realized after that I should have transfered right at the beginning when I had the chance for Setup Assistant, because I have a lot of files that require permission from my other user account on my old MacBook. I went to Disk Utilities, and there were two options to "Erase Free Space", some Toshiba thing and Macintosh HD (I am assuming was the hard drive that was transferred). I pushed "Erase Free Space" and closed down disk utility, but it looks like it didn't delete my hard drive because all the applications and files are still there. I am now reinstalling OS X Lion hoping it will bring me back to that first screen where it askes if i want to transfer from another computer. Am I doing this right? I feel like I'm gonna mess something up and i've already wasted 5 hours already trying to fix my primary mistake of using Migration.
View 1 Replies View RelatedHow I would go about restoring my mac back to factory settings, my mac didn't come with a disc.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I have a late 2009 iMac that came with Snow Leopard, but has been upgraded to Lion via the App store, so I have no recovery discs. I tried reinstalling Lion with the built in recovery, but it did not wipe HD clean. I know I need to erase the HD in Disc Utility, but then I won't have a way to reinstall Lion.
Info:
iMac, iOS 5.0.1
So my mom just bought an iMac from her friend's mother, and I'm trying to restore it to factory settings using the Installation disks that came with my MacBook Pro. I just inserted the discs and clicked "Install Mac OS X" and then it gives me a "Restart" button, but I cannot restart it without putting in the Password which I do not have. Is there another way to do this?
View 4 Replies View Relatedfully back up and return to factory settings so I can set up again in Lion (from Leopard).
Info:
MacBook Pro
I have a black macbook and want to do a full wipe and start over fresh. I have the grey install discs as well as my Snow Leopard upgrade disc. I got everything off and ready to start over. What do I need to do?
View 2 Replies View RelatedSo low and behold, my macbook box was thrown out (I don't want to talk about it), with my restore disks in it. Can I factory restore my Mac without them? I just purchased Snow Leopard tonight if that helps at all?
View 3 Replies View Relatedmy grandfather gave me his Macbook pro but he lost the dics it comes with it, i want to restore the macbook to factory mode , how do i do it and what do i have to buy if i need anything?
Info:
MacBook Pro, i believe this macbook is from 2009
I'm trying to restore my Macbook (white) to factory defaults and I can't get the disk to boot and am having trouble. Whenever I load the disk in and restart holding c, the disk spins and then spits out and the computer boots to Mac OS X (Leopard). I've reset the nvram, the pram, repaired permissions with no success. I used to have Bootcamp installed, but I read that may cause problems so I uninstalled it and it still won't work. These are the grey disks that came with the computer when I bought it new a few months ago so I know they work. They say Mac OS X Disc 1/Disc 1. Any suggestions to getting the disk to boot instead of spit out?
View 10 Replies View RelatedWhenever I update to the new operating system when it is released next month, is it possible to update while restoring to factory defauts at the same time?
Info:
MacBook Pro, Mac OS X (10.7.2)
I migrated my old MBP to my new one last night. Everything was good except that I could not log onto my schools network. I have had this problem since my old MBP. I figured that by migrating my 'Preferences' I migrated the problem along with. After many attempts at many work-arounds, I decided that I will just start fresh.
Here is what I have done:
1) I popped in the factory disc and held 'C'
2) Utility ->Disk Utility ->Erase. I selected the Hard drive. The one in the top of the hierarchy. This also cleared the name of 'Macintosh HD' to 'Untitled'.
Now I did not realize that I was supposed to rename my hard drive "before" clicking erase. This is not a big deal, but was just wondering if I will be able to change that later? Do you think that when I go to use migration assistant this next time, if I only opt to migrate "Files and Folders" and "Applications" this will most likely solve my network configurations problem? That is, it will leave my network settings at the factory defaults so I start fresh?
I've purchased my Mac book from a friend. It still has his name and password on which he cannot remember. Am i correct in assuming that if I restore it to the origianl factory settings then it will erase his settings. Also will i need anything erlse with the start up like serial numbers, auth codes etc?
View 1 Replies View RelatedI want to restore my macbook to factory settings. I have both install discs (1 and 2) but when I insert disc 1 nothing happens and the machine spits it back out again.
Info:
MacBook (13-inch Late 2007), Mac OS X (10.5.8)
How do I restore my Macbook Pro to Factory settings. I bought it from a store, and did not receive a disk with it.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
Im trying to restore my MBP to factory settings but when I restart the language setting wont appear, and when i hold option the install disk shows up but i click the install disk and still nothing, it boots normally how can i fix this?
Info:
MacBook Pro, Mac OS X (10.6.8)
I need to reset it to factory settings as it has all of her information on there.
Info:
MacBook Pro, Mac OS X (10.7.2)
I tried the disk but it said it doesn't work on my version.
Info:
MacBook Pro, Mac OS X (10.7.4)
i need to reset my macbook to its factory settings without using the OS disc because i do not have one..
View 1 Replies View RelatedHow to reset my macbook pro 2011. I don't have a disk or anything like that. My computer will not go back the start screen with the apple and just shows it loading.
Info:
MacBook Pro, iOS 6.1.6
I have Yosemite. Its a 2014 MackBook Pro. I need to erase it to send it back. Im switching from the 15" to the 13".
Info:
MacBook Pro with Retina display, iOS 8.1.2
I will sell my Macbook Air OS X 10.9.5. how to reset to factory settngs.
Info:
MacBook Air, OS X Mavericks (10.9)
I have a macbook pro which I would like to set back to how it was when I bought it, however when I got to Disk Utility then erase the options to errase are blocked? How to get past this?
View 2 Replies View Related