I have a 2007 MBP with sata150. Currently the drive is a C300 64gb and it's very fast even though read speeds are capped. If I get an expresscard esata adaptor and run my ssd from there will I get faster throughput than with the drive on the internal sata bus, assuming the esata card I get has a good enough controller? From my understanding the mbp's expresscard is connected through pci express at 2.5 gbits. Is this correct? Any old-style MBP users out there with esata and SSD?
I have the new 15 in MBP and bought a e-sata express card from OWC which is the Apiotek Extreme Dual e-sata [URL]. At first it could not be seen so I went to there site and downloaded the driver for it and got several grey screens of death kernel panics. I know the Sonnet Tempo SATA Pro ExpressCard/34 is supposed to work on the new unibody but after all that I bought to get this system up to the speed I need, was trying to avoid another 280 dollars and want another 4gb Ram chip more. [URL]. I am only running one external drive like this for PS scratch, OS backup and a working drive that is partitioned in 3 sections. Wondering if there is another express card that is working in the new 15 in 2.93 without any issues.
I just did a search and found nothing but an extremely lengthy thread that makes no sense and doesn't even answer the question. I just want a simple answer here: I have a new 17" '09 uMBP. I want to use my eSata external hard drives. What expresscard adapter should I buy? I was transferring stuff over via USB and was horrified: 25 minutes to transfer 20 gigs of pictures! 20 gigs should take no more than 5, maybe 10 minutes tops over eSata (as it did on my old laptop). So which eSata-Expresscard actually works for the uMBP's?
Does anyone know how the performance compares between (1) an external hard disk connected with eSATA, through a PCIE card, and (2) the same disk connected directly to Firewire 800? Is there some data about this?
I tried installing a Dynex eSATA II ExpressCard Adapter that I bought at Best Buy. I downloaded the drivers off of the website and tried to install them and got an error message: the following failed: run preflight script for Sil3132 Mac OS X Driver. Contact the software manufacturer for assistance.
Recently upgrading, I bought the newest MBP 17" specifically because it still had the expresscard slot (thinking having eSATA capability would make it the only pro laptop in the new lineup). I don't need my storage to be portable, I edit at home. Being new to RAID I've been researching and asking questions. I want to get the best setup for my money. People have recommended FW800 but that doesn't help me need to get the most speed possible, I feel eSATA is faster. I also want the redundancy in case a drive crashes. But the MBP only has one expresscard slot.
Does this mean my bandwidth is limited to one 300Mb/s channel? i.e. Should I not even consider RAID0 on a MBP since the bottleneck is 300MB/s? Barefeats recommends this adapter saying it's the fastest they tested at only 200MB/s! So what advantage will stripping give? It seems with only one available eSATA channel the MBP doesn't have many options for professional storage (although still faster than FW800). What would people recommend?..........
I recently bought an SSD vertex 64gb for only 200$ cad. Unfortunately, I do not have enough space to install the Soundtrack Pro components on this drive. I recently bought too an eSata powered cable and a express card esata who came with it. The hard drive can't be detect on my macbook pro unibody late 2008 2,4" but runs. I install the silicon image drivers non-SL and adding over that the SL drivers.
[URL] In that case, I want to know how to uninstall those drivers from silicon image 3132? I thought about another thing if it really not work eventually. The dvd-drive bay could be remplaced by an enclosure 2.5" for my factory 250gb 5400rpm.
[URL]
Second question, Does this other hard drive will take a lot more power?
I have a late 2008 12" MacBook with a FireWire 400 slot (only). I am hooking up an 8TB Raid hard drive to it for digitizing, backup and editing on FCP 6 and would like to have a higher speed available than the laptop's FireWire 400 provides. Is there a way to augment/build out the MacBook to utilize either a FireWire 800 slot or an eSATA EC2 card? I don't think this version of the MacBook (MacBook4,1) has a PCI or PCIe card slot. Although I believe it may have a mini-PCIe card somewhere, as the last page of the Users Guide says (under Europe—EU Declaration of Conformity):
"Hereby, Apple Inc. declares that this 802.11a/b/g/n Mini-PCIe card is in compliance with the R&TTE Directive."
Info: MacBook, Mac OS X (10.5.8), 2.4 GHz Intel Core 2 Dup
I have a 15" MacBook Pro from a couple of years ago (2.0 GHz) and I am about to upgrade my harddrive from 75 GB to 500 GB (and from 5400 to 7200 rpm). I think I am going to simply clone my harddrive, so I bought an enclosure for my new drive to use when transferring all my data. The enclosure I purchased works with usb 2.0 or eSATA.
My question is, should I take advantage of the eSATA speeds? Do you think it's worth it? For another 50 bucks I could by an expresscard and a cable that will allow me to do the transfer via eSATA. Should I bother or should I just stick with USB 2.0? I hear USB 3.0 is coming out early next year, so I was thinking I shouldn't bother with eSATA (though 50 bucks isn't much of an investment). But I'm not about to wait for USB 3.0 to come out. Do you think it would be worth spending the money to get the extra speed for this transfer? My 75 GB drive is almost full.
I for one am really happy to see FireWire 800 still included on these machines. I have five external HDs, all with FireWire, of which two are portables (freeagent Go). I also use two video cameras, both FW. I'd hate to lose FW connectivity too soon. Transferring data (audio, video or other) via USB has always been slow and problematic for me. Sometimes pieces are dropped or end up corrupt. FW has always been smoother and problem free in this regard. Hopefully FireWire will still be around a little longer than some expected. Rumours of its untimely demise have been greatly exaggerated of late
eSATA or lack thereof does not bother me as only one of my drives supports it and little else on the market does either. USB3 would have been a nice addition but maybe its early days yet and with LightPeak around the corner we may not need it at all. HDMI would have been a no brainer. Sorry but display port is just another Apple specific port which only serves to differentiate and annoy when common high quality alternatives already exist.
I am looking for a eSata expresscard for my MacBook Pro. I have a problem with looping my G Drive external through my firewire soundcard due to the single bus on the mbp. It just doesn't like it. What eSata expresscard adaptor would you recommend so i can hook my G Drive upto it?
I have a Mid 2010 15" Macbook Pro, and I want to connect an external hard drive over eSATA. My model of MBP does not have an ExpressCard/34 slot, but instead an SD card reader slot. Is there an adapter that works that would allow me to connect an external hard drive over eSATA?
The MBP has one expresscard slot. So if you use an eSata adapter (even if it has dual eSATA ports) it would only have one eSATA channel And that would be limited further by the express card slot and more still by the type of card (make, model, etc..). My question is: with Barefeats claiming even the best eSATA card for a MBP being 200MB/s (even if you claim less) using a dual eSATA RAID connection for a stripped array would be limited to 100MB/s per port. Is this correct? Because I'm trying to understand this to see if it's worth building a RAID setup for my MBP when I'm home.
I've asked this numorous times and get helpful advice but not addressng this specific and fundamental fact. I am not interested in FW800 because I want the fastest I can get but want it to make sense. I would also reask my other questions about my situation but this question comes first.
I have two external hard drives. First is Lacie 4big quadra. It is connected to my mac via FW800 Then I have a g-raid connected to the lacie via FW800. This all works fine. Both external drives have eSata. Is it possible to connect the two drives together via eSata to take advantage of the faster transfer speeds between the two drives? Even though the first drive is connected to the mac via FW800. I tried and the second drive didn't mount when connected via eSata.. but maybe I am doing something wrong.
I installed a Dynex eSATA pci-e card into my Mac Pro. When i attempt to shut down, it never works, it hangs up with a blank screen and the wheel going round and round forever. Also, If I try to start up with an eSATA external drive on, it will never fully start up-just hangs up again. It will work if I plug the eSATA cable in after booting, then turn on the external drive, and likewise, eject it and power off before shutting down. I really do not want to have to go through this every time I start up / shut down.
Just got the new Newertech 6G ESATA card from OWC and I'm having problems getting my ESATA cable fitting into it. It does not go in very far, and never latches on to the two tabs. Before I go out and buy a new cable or return the card, please take a look at the two pics and tell me what's wrong. I'm afraid to try to force the cable in harder since it doesn't seem normal that there should be so much resistance.
EDIT: Jammed it in real hard and it seems to have seated itself, but the drive is not showing on the desktop or in Disk Utility. Mac Pro recognizes the card just fine (slot 4). Will try another cable, but something feels wrong about the card. It shouldn't take this much force to plug the cable in.
I have a G-RAID drive and I want to try editing faster through the eSata slot. I know they have adapters that work for Macbooks Pro, but is it the same for my iMac? Can I use it through the SD? And if yes, any recommendation on which model/bran to buy?
I want to add a second external drive, either 500 GB or 750 GB. It would be partitioned into one partition for cloning, and the other for TimeMachine when I upgrade to Leopard. Currently my external drives are all Firewire. Would there be any significant advantage for me to buy a SATA controller card for my G5 and then go to eSATA rather than Firewire? One online dealer I contacted said that the speed advantage for the SATA for my uses would be minimal, but the possible headaches of eSATA over Firewire could be signifcant. I"m conisedering the 750 GB LaCie d2 Quadra drive.
Information: G5 Dual 2.0, 2GB RAM Mac OS X (10.4.10) also running IMac Intel 2.0/2
I am looking for an eSata, Firewire 800, USB external enclosure that has removable trays for two or more hard drives. Specifically I am trying to find one that has the similar apperance of the Mac Pro, aluminum case and such.
I have a new Mac pro with a Sonnet Tempo SATA E4P card. Is the external eSATA connection as fast as an internal one?More specifically, if I sue an external hard drive, connected via eSATA for a photoshop scratch disk will it be as efficient as an internal disk?
I am buying an external Blu-Ray drive and have been looking at one by OWC that has USB 2.0, Firewire 400, 800, and eSATA connectors. I've really become interested in a drive that is made by Buffalo Technologies and has a USB 2.0 and eSATA connector. The issues are as follows:
-Will USB 2.0 handle the bandwith well or do I really need something such as Firewire or eSATA?
-Most of all, is there an adapter to convert an eSATA connector such as on the Blu-Ray drive to a Firewire connector that I could plug in the front of my Mac Pro?
I made about adding esata to my Mac Pro 2.66 Quad, I added a card and now have to esata ports.I've been thinking about buying an Icy Dock enclosure that will hold 2 HD's and supports both USB and esata. The way I see it, I should want to run the faster esata.It has all kinds of settings including some for RAID configurations.It appears that the RAID will work with USB but as to the esata, which is what I want, there is the following language
I bought a USB2 + eSATA docking station for my Nehalem MP. The docking station works perfectly well using the USB2 port, but I just can't get the eSATA card to work.I have a cheap sil3231 card, I'm using siliconimage's latest OS X drivers, with a single drive (so no RAID), and it won't mount. I played around with the jumpers, nothing. Can anyone think of something I missed?
