I have a G-RAID drive and I want to try editing faster through the eSata slot. I know they have adapters that work for Macbooks Pro, but is it the same for my iMac? Can I use it through the SD? And if yes, any recommendation on which model/bran to buy?
Info:iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I have a Late 2006 20~inch iMac with a USB2.0 & 1394 & eSATA combo Drive {SBP-LUN}. I have a Macally external drive that has an eSATA port. My iMac has no eSATA port. I am presently using the Firewire 400 ports {1394}to connect the external drive to the computer. How do I utilize the eSATA part of the combo Drive? Â
Info:
iMac, Mac OS X (10.4.11), Intel
It's been a while since I've been to these forums but I've come across another issue.
I bought this refurbished Macbook from Apple on November 26, 2008 (model MB061LL/B).
I would like to set up a mac pro using Slots 1 & 2 for RME ADAT digital audio cards and move the graphics card (geforce GT 120 512mb) to slot 3 or 4 so that I can maximize slot speeds for multiple audio playback via logic. Is this possible?
View 5 Replies View RelatedCan not insert DVD, nothing else has been loaded. Only change to system was latest security update.
Info:
iMac, Mac OS X (10.6.8)
cd goes only halfway into the slot
Info:
iMac, Mac OS X (10.6.8)
I put the SD card of my camera into the DVD slot of my iMac! Any Idea how to manage it?
Info:
iMac
Just got the iMac and tried downloading pics off my SD card. Can't find the "Finder" to eject the SD card from the slot.
Info:
iMac, iOS 5.0.1
How can I get an sd card. Out of tge disc slot in my IMac.
Info:
iMac
Suddenly I am unable to insert a DVD into the slot. It seems to be blocked.
Info:
macbook and G5, Mac OS X (10.6.2)
The SD card is in the wrong slot. How i become it out of the DVD burner?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.2)
The CD slot is so close to the memory card slot, and I usually find them by feel as they are on the far side of the computer. I have to actualy stand up to peer around the side of my screen. While trrying to retrieve the card, I heard something drop, presumably it has droped inside somewhere.
Info:iMac, Mac OS X (10.7.3)
How do you load a mini dvd into the side slot?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
My room mate accidently inserted an sd card in the cd slot of her iMac; is there a way to retrieve it without taking the computer to an Apple store?
Info:iMac, Mac OS X (10.7.3)
I can't get any SD cards to mount using the card slot on my new iMac, if I use an external card reader they work fine
Info:iMac, Mac OS X (10.7.4)
My kid put camera memory card in CD slot. How can I get it out? I tried eject but not work.
Info:
iMac 21, Mac OS X (10.6.4)
How can I de-activate the headphone slot? the plug of my headphone broke and is stuck in the slot. :-( Or, how can I remove the plug?
Info:
iMac
How do I get camera memory card out of the DVD slot?
Info:
iMac, Mac OS X (10.7.1), Itunes Is F*CKED
does my imac 24 inch 2009 model have a memory card slot? if so, where is it located?
Info:
iMac, Mac OS X (10.7.3)
What is the max capacity of the SD card slot?
Info:
iMac, OS X Yosemite (10.10.1)
On the G5 and Intel iMacs, is there any manual eject (paper clip or other probe) on either of the optical drives, Combo or Superdrive?
View 3 Replies View Relatedi can't insert any disc in my disc drive slot something is blocking insideside
View 9 Replies View RelatedI have a 2007 MBP with sata150. Currently the drive is a C300 64gb and it's very fast even though read speeds are capped. If I get an expresscard esata adaptor and run my ssd from there will I get faster throughput than with the drive on the internal sata bus, assuming the esata card I get has a good enough controller? From my understanding the mbp's expresscard is connected through pci express at 2.5 gbits. Is this correct? Any old-style MBP users out there with esata and SSD?
View 1 Replies View RelatedI have two external hard drives. First is Lacie 4big quadra. It is connected to my mac via FW800 Then I have a g-raid connected to the lacie via FW800. This all works fine. Both external drives have eSata. Is it possible to connect the two drives together via eSata to take advantage of the faster transfer speeds between the two drives? Even though the first drive is connected to the mac via FW800. I tried and the second drive didn't mount when connected via eSata.. but maybe I am doing something wrong.
View 7 Replies View RelatedI installed a Dynex eSATA pci-e card into my Mac Pro. When i attempt to shut down, it never works, it hangs up with a blank screen and the wheel going round and round forever. Also, If I try to start up with an eSATA external drive on, it will never fully start up-just hangs up again. It will work if I plug the eSATA cable in after booting, then turn on the external drive, and likewise, eject it and power off before shutting down. I really do not want to have to go through this every time I start up / shut down.
View 1 Replies View RelatedRecommend me an esata expresscard that works well with the MBP? I need one to connect an external harddrive.
View 16 Replies View RelatedIs it possible to make an adaptor to connect an Esata Cable to a Firewire 800 Connector ?
i would like to connect my Esata Harddrive to a Firewire 800 port..
For the early 2009 macpros with PCI x2 slots (2 at 4 slots and 1 at 16), can I use a PCI-X on a PCI-X2?
I am looking for an esata card but i haven't found any that are in PCI-X2, many are PCI-X...
Just got the new Newertech 6G ESATA card from OWC and I'm having problems getting my ESATA cable fitting into it. It does not go in very far, and never latches on to the two tabs. Before I go out and buy a new cable or return the card, please take a look at the two pics and tell me what's wrong. I'm afraid to try to force the cable in harder since it doesn't seem normal that there should be so much resistance.
EDIT: Jammed it in real hard and it seems to have seated itself, but the drive is not showing on the desktop or in Disk Utility. Mac Pro recognizes the card just fine (slot 4). Will try another cable, but something feels wrong about the card. It shouldn't take this much force to plug the cable in.
I want to add a second external drive, either 500 GB or 750 GB. It would be partitioned into one partition for cloning, and the other for TimeMachine when I upgrade to Leopard. Currently my external drives are all Firewire. Would there be any significant advantage for me to buy a SATA controller card for my G5 and then go to eSATA rather than Firewire? One online dealer I contacted said that the speed advantage for the SATA for my uses would be minimal, but the possible headaches of eSATA over Firewire could be signifcant. I"m conisedering the 750 GB LaCie d2 Quadra drive.
Information:
G5 Dual 2.0, 2GB RAM
Mac OS X (10.4.10)
also running IMac Intel 2.0/2
