MacBook Pro :: Stripped 3.3mm Phillips Screw Holding Super Drive
Jul 20, 2010
So I was taking apart my MBP to reapply thermal paste on the chips and I accidentally stripped one of the screws holding the super drive to the chassis. It is a 3.3mm Phillips screw that is on the bottom right of the super drive if you are facing the screen when it is upright. The screw is heavily stripped as looks nothing like a + now. Does anyone have any ideas as to what I can do to remove it without damaging the rest of my MBP? I have 3 sets of high precision tools and they all are having a hard time with the screws on my MBP. My local Apple store was nice enough to order some new screws for me which i will be getting in a few days.
View 10 Replies
ADVERTISEMENT
Jul 9, 2010
Anywhere to find replacements? It's the two top screws holding the bracket in place. How am I going to get these things out? I am not sure why they are so tight this time.
View 7 Replies
View Related
Sep 11, 2009
I was trying to do a memory upgrade the other day, and tried to take the wrong screw off. I went to try to screw it out, but the screw stripped. How can I get this thing removed and replace it with a new one? Or should I just take it to the local genius bar?
View 1 Replies
View Related
Dec 16, 2009
I have a mid-2006 Macbook and have never tried to do any tinkering on the inside except for installing some RAM. Whenever I had any trouble in the past, I took the machine into the Apple Store. Now that my Applecare warranty is up, I figured that I can crack it open to do some repairs regarding my fan without voiding my warranty. Alas, it seems that someone on Apple's end stripped a screw / put it in improperly. Now, I cannot get it out. The screw in question is the center screw in this picture (from iFixit, not my Macbook): All other screws in the tear down came out easily except for this one. Dammit. What should I do? It is too late to point fingers at Apple because I have no proof that I wasn't the numbskill who did this. It is just such a small screw... I'd just like to remove it somehow
View 14 Replies
View Related
Aug 27, 2010
The screws that hold the battery in place (Triwing Ones) One of them is stripped on my MBP. I ordered some new ones and they should be arriving next week. Does anyone have an idea how to get the stripped one out? I have tried pliers but they don't seem to grip the screw to be able to turn it. This is the screw I mean.
View 14 Replies
View Related
Feb 7, 2012
Recently I up/downgraded from a 2010 17" Macbook Pro to a 2011 15" Macbook Pro. I had previously swapped the old hard drive in the 17" to an SSD using the OWC data doubler kit. Now that I moved on to the 15", I wanted to move my SSD over to the new Macbook Pro.
During the process opening the new MacBook and unscrewing a two of the screws around the optical drive, both of the screws became stripped on the module the covers the optical drive. I have to be honest and say that they are pretty badly striped at this point. I've read a handful of articles online with many different possible solutions on removing the stripped screw, but none of which seem to work nor do I want to cause any further or possible permanent damage, I do have AppleCare on the machine, but I wasn't sure if modifications and upgrades such as this where covered.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 12, 2012
I have been assigned the task of installing new memory modules into the iMacs at work. When I got to my supervisor's iMac, I discovered someone had been in to service the memory compartment at least once before. Only this person must have used a screwdriver that was too big to begin with and then cranked the central screw on the cover plate and stripped the head of the screw in the process. So now I cannot get this screw loosened. I obviously don't want to bend or damage anything. What would be a viable solution besides taking it in to a service tech?
View 6 Replies
View Related
Oct 8, 2009
I tried changing the hard drive on my MBP, only to totally strip the screws on the hard drive bar. Took it to Apple, they are happy to repair it, they said they may have to break the hard drive bar in order to get it out, but no problem. However, my local Apple Store is closed for a refitting until 30/10/09 and they want �48 in order to do the repair. That leaves a slightly bitter taste in my mouth considering it's such a small job. I'm wondering if anyone has had any experience with 'screw extractors'? They are little screw bits that bite into the screw in order to turn it. They are about �9 for a set so could save me a bit of cash. To be honest, it's not the money that's the problem, I don't want to wait another 3 weeks. I'm not really wanting to drill into the screw or glue a hex key, so the 'screw extractor' is the only option really. Just wondered if anyone can vouch for these little extractors. If not, then I'll suck it up and Apple loose on my machine.
View 16 Replies
View Related
Dec 3, 2009
well while attempting to replace my hard drive I like many other people I completely stripped out the two screws on the hard drive bracket on my 15" PowerBook G4. They are very small screws, and I thought I had the correct size philips but apparently not. I tried to cut a slot in one of them with a Dremel but that only destroyed the entire head of the screw and sent bits of shavings everywhere. What can I do to get these screws out? Should I drill them out? I just can't think of any other way to get them out when one's stripped and one is worse than stripped. Is it possible to get replacements?
View 4 Replies
View Related
Nov 23, 2008
I'll be a new Mac user come this Christmas and I had a question concerning my TV. I have a 42" Phillips 3000 Series LCD 1080p TV - it has no VGA input but it does have HDMI so I was going to go with the DVI-HDMI cord on the Macbook. My question is: will the picture/colors suffer from the transfer of display?
What resolution would I have to set my Macbook to in order to optimize the display settings? Would I have to alter my TV in any way in terms of settings or calibrations?
View 9 Replies
View Related
Nov 18, 2010
First off, I am very O.C.D when it comes to my electronics and I constantly worry about my stuff. Over the past month, I have been checking SMART status and benchmarking my hard drive at least once a day. I'm a little worried that my hard drive is dying... Yea, I'm crazy...Regardless of the above, I would like some answers to a few questions..First, how durable are the unibody lower case screws? Do they strip easily? If I purchase the correct size screw driver (phillips #00), what are my risks of damaging the screws, or possibly wearing them out prematurely?Second, how difficult is it to realign the lower case and not cause a "wobble." I have read some people incorrectly screwing in the bottom case and basically bending the lower case, causing the machine to wobble on a flat surface.After reading my manual, Apple clearly indicates that users are permitted to service the hard drive. I'm technologically savvy but my only worries are damaging my $2500 machine...
View 3 Replies
View Related
Jun 5, 2014
My slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
View 1 Replies
View Related
Oct 31, 2008
Ok I still have my iworks cd from when I bought the MB. Im thinking of getting the MBA tomorrow possibly. without buying a superdrive how could I get iworks onto the MBA. if I brought it with me could they just do it at the store?
View 7 Replies
View Related
Feb 25, 2009
Some of the new macbook pro 17" have been reported shippping with a Toshiba SSD. According to the results it stands for Super Snail DriveShould I be scare to find one of those in my next MBair 1.86 SSD ?
View 20 Replies
View Related
May 26, 2012
I have an old black Macbook (about 6 years old, with all of the recent downloads, etc.). I am going to get a Mac Air Book and I wanted, before I bought the Mac Air Book, to try out the external Super Drive with my old MacBook (which is working fine for burning and reading CDS and DVDS) ... I plugged in the USB cable of my brand new Super Drive to my old MacBook but when I inserted the blank CD into the slot of the external Super Drive, the CD was not taken up by the SuperDrive. It went in perhaps 95 - 98% of the way but did not "take hold" the way I suspected it would. I know that I don't need this Super Drive for my old MacBook but I wanted to see if it would work with it .. in anticipation for getting the Mac Air Book. Does this mean that I have a defective Super Drive ? Or does it mean that it will only work with a MacAir Book ... or what ? I am sure there are some easy answers. Or should I force the CD harder into the Super Drive ?
View 1 Replies
View Related
Aug 12, 2009
The last couple of months my 2 year old white Macbook does not read audio cd's anymore. Once in a while it will load one, most of the time the first after a restart, but after that every audio cd will be ejected after several attempts of my superdrive to load the cd. Data cd and dvd's play just fine, and cd-r's can also be burned, no problems there.
View 3 Replies
View Related
Oct 27, 2009
Been searching but nothing specifically addressing this issue. I can put in DVD's and music cd's but a blank CD-R is just not recognized. Just had this superdrive replaced 6 weeks ago.
View 2 Replies
View Related
Jun 19, 2012
Just wanted to let everyone know I had to update Mac OSX to be able to use the superdrive on the new macbook pro retina display. Before that it would show me what was on the disk but I couldn't access it. Even after I updated it I had to browse through finder to find the drive to be able to run what was on the disk, as it didn't pop up automatically.
View 1 Replies
View Related
Feb 26, 2008
I have VMWARE and Vista ultimate full edition and do NOT have a super drive. Any ideas on how to go about getting Vista to work in VMWARE because it is not recognizing the disc via "Remote Disc" feature
View 1 Replies
View Related
May 13, 2008
I do NOT have the superdrive and would like to install windows XP pro on my MBA with VMware Fusion. I've tried making .dmg, .iso, & .cdr images of the windows XP disc but i'm having NO luck with Fusion recognizing the disc image. When I create the new Virtual Machine I select "use disc image" and point to the appropriate disc image file. I keep getting a "no bootable device" error from fusion.
Can somebody who has successfully installed windows on an MBA without using a superdrive give me the step by step instructions you used...I'm getting pretty annoyed at this point.
View 15 Replies
View Related
Jul 1, 2010
Okay so I'm thinking of putting a Intel SSD in my MacBook Pro 13" as soon the next generation is launched thus removing the SuperDrive in order to fit both drives. I haven't used it a lot of times but a few times I do need it and that's why I'm now asking this question.
What external DVD enclosure will work with the MBP SuperDrive if any and how will i eject the DVDs. I'm not going to shell out a 100 bucks plus shipping to Sweden for the MCE Optibay so that's out of question, however cheaper ebay alternative that ships to Sweden with reasonable shipping is okay.
Also while I'm here. I've been thinking about upgrading to 8GB ram kit however a friend of mine told me any ddr3 sodimm ram won't work which sounds weird but to be safe I'm asking if that's true? I'm thinking of buying a Corsair 8GB(2x4GB) 1333MHz kit.
View 3 Replies
View Related
May 21, 2012
I am trying to restore my MacBook Pro, but when i insert the OS install disc, it just spins and spins and spins, tells me the disc is blank, and ejects it. I tried using other installation discs (MS Office, Adobe Creative Suite, Final Cut),and had the exact same result. My drive will play DVDs without any problems. What do you suppose is wrong? I have tried resetting the PRAM and SMC to no avail.
View 1 Replies
View Related
Jun 19, 2014
I have an iDVD project on an older macbook without a superdrive. The iDVD project is complete, but I can't burn the dvd. I also have a newer macbook with a superdrive. Is there a way to connect the 2 computers together so that I can use the super drive from the other computer to burn the iDVD project?
View 3 Replies
View Related
Jan 7, 2010
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies
View Related
Apr 5, 2012
Just got a brand new macbook pro, and eve since I first started it up it has made this weird noise right before the start up audio. i have done some research and i have found out that there are two superdrives that apple puts into their macbooks and that one is louder then the other, but this was back in 2009. should apple have fixed that through out all these years. what should i do?
Info:
MacBook Pro, Mac OS X (10.7.2)
View 4 Replies
View Related
Dec 7, 2014
The Super Drive on my MBP seems to be completely busted, whenever I try to read a DVD or CD it takes the disc in, spins it around a couple of times and then ejects it again without ever coming up with any options as to what to do with the disc. Discs don't appear in Finder either. It's obviously failing to read the discs and ejecting them within 30 seconds.
Now I've searched for a solution and as a result I've reset the NVRAM to no avail, and also tried using a CD lens cleaner but that seemed to have no effect either, I guess maybe as it got ejected within just 30 seconds as every other disc does.
The next solution I've found online is to delete Finder's preference files. The files I'm supposed to delete are "com.apple.finder.plist" and com.apple.sidebars.plist", however neither of these files appear to exist on my computer.
I remember discovering the fault while my MBP was still in warranty but I rarely use the Super Drive so totally forgot about it and it's now out of warranty
Info:
MacBook Pro, OS X Mavericks (10.9.1)
View 2 Replies
View Related
Nov 8, 2010
I've been using this MBP since 2007, and, it's starting to fail me. I was using an external hdd on it since the internal one crashed, and, then the external one crashed. I just purchased a 250gig hdd which fits perfectly in my Macbook, but, now I have another issue that's been pressing me for some time that didn't bother me at all until now when I need to install Snow Leopard;
My Super Drive isn't reading discs at all, and, it's making this scary crackling noise. I uploaded a video on youtube of me putting 2 discs in it, 1 with content (World of Warcraft: The Frozen Throne) and the other without content (Just a blank CD).
Before I link the video, I'd like to note that I am apparently amazed by the laser seeing as how I point to it and make a note of it ._. URL
View 2 Replies
View Related
Mar 13, 2012
I have a mac mini server so it doesn't have a built in drive. I've been using a macbook air superdrive and it works wonderfully. I've had the need to queue up multiple copies and disc reads though recently, so I bought a second superdrive. (Less having to change discs, more automation while I'm away). The problem is, the mini only reads one superdrive?Both superdrives work individually if they're the only one plugged in, in all usb ports. But if both are plugged in, the 2nd one is not recognized and appears to not even have power as it won't accept a disc. how to make the mini see both devices and treat them both as active cd/dvd drives?
Info:
Apple Remote Desktop, Mac OS X (10.7)
View 4 Replies
View Related
Mar 7, 2009
I just installed a new Samsung Lightscribe drive from OWC and now neither my Super Drive nor the new drive shows up. When I check my Sys Profile under Disc Burning this is what is showing up. No burning device was found. If you are using an external device please make sure that it is connected and powered properly.
View 4 Replies
View Related
Sep 12, 2010
So this is what i need help eith i did it all apart from this bit, i am so close any help would be amazing i am using VMware fusion 2, might i have to have version 1? link to thread [HTML] [URL] Code: I opened up the settings for the newly created virtual machine, and changed the disc to point to my Windows 7 ISO file.
Code: 'm working on installing Windows 7 without a DVD (broken SuperDrive here) using VMWare Fusion and the instructions provided by melchior....................
View 6 Replies
View Related
