I just got the new incase hardshell for my 13 MBP, but the bottom piece doesn't clip on properly. Has this happened to anyone else? I'm following the installation instructions, but am I doing it wrong?
View 3 RepliesMy macbook is from 2009 and now a piece from his screen doesnt show any pictures anymore. I went to a shop from Apple and they told me that its a contact problem and to solve this it will cost about U$700, thats almost the price from a new mac!
Info:
MacBook
I'm doing a quick promo. I recorded a rough script VO, organised my clips and music.Â
I then had the professional voiceover artist record a revised script.Â
However, I can't simply replace my original script as we have added a couple of things. What I would have done under 7 is lock the background music and video clips in place, remove the VO timeline, and then replace each bit separately. However, I can't do that because the video clips have connected themselves to each other.Â
I also have shuffled a couple of things around so need to keep the video the same, but move the audio to a different part. I can move the video without moving the audio, but I can't move the audio without moving or deleting the video.Â
after color balancing a clip I get a flickering border on top and bottom of my clips, visible in timeline and also after rendering. It's easy to see in this clip (starts around 15 seconds in): URL....
If I remove the color balance it will go away. I wonder if it has to do with the source clip being in 1080i instead of p. The preceding clip is also color balanced but is in 1080p. It's less noticeable but sometimes still there when other color correction is invoked. I'm using a late 2013 Haswell 27 in iMac with 8gb ram.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
I import clips from a flash memory drive (the one attached to Sony NX5U camera). The drive is connected with USB cable. All clips imported are fine except one. The problematic one is in the AVCHD category in the browser and has a little camera icon on the bottom left of it's thumbnail. I cannot share the project containing that clip (there is a message that says:''this Item cannot be shared while it is still referencing media on the camera''). What does that icon mean and how do I import the clip properly ? I tried importing the clip again and it does the same thing... Â
Info:
Final Cut Pro X, Mac OS X (10.7.5)
I just realized that the Unobody MacBook (later 08) does not close properly. It's kind of hard to move the lid (compared to my UMBP) and the magnet is not strong enough to keep it closed.
The Apple Care expired some weeks ago !! So I can't can"t let it fixed by apple for free
What shall I do?
I recently received an Intel SSD 80GB 2.5" for my MacBook (Alu MacBook 13"; the MacBook specific area is pretty dry as far as SSDs go). While it is quite fast and I am content with the speed, one anomaly has arisen. I was walking upstairs with my MacBook closed in hand and embraced to my chest when I heard a rattling noise coming from the sleeping machine. I opened it up to see that the SSD has about 1/2 to 1 inch of movement horizontally and about 1/2 inch vertically. When I put in the new drive I made sure to screw in the bracket nearest to the logicboard (but I later realized that the SSD does not have the nubs the old HDD did and therefore it does little in the way of securing the SSD). I looked at this video on information about how to install the SSD, but as far as I know, I have done everything that he has.
Am I correct in assuming that this is normal? This is my first installation of a new hard drive of any means into a laptop.
Well just installed XP on my boot camp partition. Here is my issue:1. The trackpad doesn't seem to be working properly. It's showing under device manager fine but the 2 finger right-click option isn't working. 2. Is the keyboard supposed to be backlit in XP?3. The sound buttons on the keyboard are not working (f11-f12)
View 5 Replies View RelatedI just bought a new macbook pro with retina display. i found a bluetooth problem. when i use my bluetooth stereo headset, the sound interrupts every a few minutes!
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
I've been using a Moshi ClearGuard KB protector for a while but haven't been happy with the fact that it gets cloudy over time and requires frequent cleaning to restore. I bought the Marware keyboard protector shown here because it looks nice and shouldn't have the same issue with clouding. My only issue with it is that it doesn't fit properly over the enter and shift keys, so the wording on the protector itself is not lined up with the wording on the key below. Does anyone else own this protector? Does yours have the same issue? I'm trying to figure out whether mine is defective or if it's a design flaw.
View 3 Replies View RelatedAfter I executed automation and default clean up function with Onyx. After reboot Finder doesn't open anymore on the menu bar there are only three options: finder, files, help. I have to click on the finder menu and choose run full finder to get it back to work.
Launchpad simply doesn't show anything anymore
spotlight just disappeared...
Im able to create a new account and everything works fine. I have keychain in the current account so it will be better if I can fix this.
Info:
MacBook Air, OS X Mavericks (10.9.1)
Have a brand new MBP 13" using Thunderbolt-DVI adapter with my old Dell 2405 LCD. Have an interesting scenario ... when the display goes to "sleep" there is still some type of signal coming out of the display port. The monitor will stay on and just blink "NO SIGNAL DETECTED ON INPUT 2". But the monitor actually still stays on.When I put the entire laptop to sleep them the monitor will properly power down to sleep mode.Â
I don't think its the monitor because I've used this monitor with a number of different machines and graphics cards, in every scenario when I had the display set to sleep it powered off just fine. Â
As i ask that battery not stable,last few day i was sense that the percentage doesn't work properly,like when it showing 1% battery life, but after another few second onward its showing me 2% left...So i would like to know what happened to my mac book pro ya? its that cause the battery going die?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
if any of you have any stuck or dead pixels on your machines? I have a blue one and it's sh*tting me up the wall. I tried everything, the website that just flashses all the different colours, the damp cloth and then tapping it trick... turning it of and on and applying pressure, all of them to no avail. Anyone else have any pixel issues? Also when looking at my MBA from the side when the screen is closed there is quite a big gap between the keyboard (bottom half) and screen (top half) it's closed and tight towards the thin end, but towards the bigger end the gap gets quite large, about 4-5mm...should i put a book on it or something to try and flatten it out?
View 3 Replies View Relatedit feels like someone else is controlling my mouse. This just started happening. My trackpad doesn't work or works sporadically. While typing the pointer is scrolling all over my screen.
View 4 Replies View RelatedI own a Sony Cyber-shot camera, and a 24 inch IMAC computer. I took a short video clip and downloaded it to Iphoto (no problem doing that). I then downloaded the clip to a 4 gpb flash drive, as an mp4 video. My problem is that my friends Microsoft based PC can't play it.
View 1 Replies View RelatedI just installed 4x1gb OWC ram onto my top riser, adding onto my previous 2x512(dimm 1&2) + 2x1gb setup (which is now on my bottom riser). My previous setup had no problems and OSX detected the ram just fine but now with my previous setup on the bottom riser, OSX only detects the top riser with the new OWC 4x1gb ram. My former setup now displays a red LED light on the bottom riser.
View 3 Replies View RelatedI own both an iMac and a MacBook.Lately I've been trying to use [URL] and while the website does work, it displays totally wrong on my iMac ?I looked at all I could think of (not a newbie, but not savvy enough to go look in the coding to look for errors there).The one section from the site which displays correctly is one without a menu on both right and left. It's a blog. Here's a clue, I guess. I tried with both Safari 5.1.6 and Firefox 13.0, with the exact same result. But on my Macbook it displays perfect! I am using Firefox 12.0 on it. So I downgraded to Firefox 12.0 on the iMac... no success.Of course I also cleared the cache, closed the browser, and the computer... no luck.I then removed all plugins, since it was the only remaining difference...I thought it could be a difference in display... altough I couldn't see how... I changed it from 1920x1080 to the ones similar to my Macbook's (1280x1024 and 1280x720)... Of course it was the same, just more blurry. It doesn't make sense and I hate it when it doesn't make sense!Of course I hate it even more that I can't use that website on my iMac!!! (or with a lot of hassle).Â
Info:
iMac, Mac OS X (10.7), 21in.
I have a problem...my 12" Powerbook G4 doesn't start up properly at the moment. I turn it on, I can hear the chime, and the screen goes grey but then does nothing...I've tried holding down C while starting up too, but still nothing happens, just the grey screen.
View 5 Replies View RelatedGoogle News doesn't work properly with Safari 5.1.4?
Info:
iMac, Mac OS X (10.6.7)
I can not run the apple hardware test although I Know the "superdive" unit does not work properly.
Info:
iMac, Mac OS X (10.7.4), Aluminium 21,5 " Imac Intel core i3
Very recently, a search for a particular artist starting yielding songs by that artist but also many other artists. Some might think I shouldn't be disturbed by this, but the search function was perfect until now. There were no unwanted selections. What is wrong? How can I get iTunes to function as perfectly as it has for many years?
View 1 Replies View Relatedi m not sure if it has something to do with office 2011. coz i did not change any system configurations, only installed office for mac today.
airport also seems broken. can not sharing my internet for iphone.
internet sharing is on, firewall is off. iphone can connect to the wireless, but wont DHCP the right ip address. before it was something like 10.0.0.x when its working. now the ip adress i got on the iphone its 169.254.xxx.xxx
I have a mighty mouse and the ball scrolls down but dont scroll up. I have tried the plain sheet of paper and rolling the ball on it until it cleans itself but its only worked for a while, now nothing seems to be working
View 8 Replies View RelatedIt started recently, and I've had this Mac Pro (10.6) for several years. Sometimes, when I move a window, it doesn't redraw the screen *under* it properly, leaving my screen completely messed up. Activating Dashboard (temporarily) fixes it (causes a correct re-draw of everything), and sometimes taking a screengrab fixes it - the display looks correct underneath the area I am selecting for screengrab. A reboot fixes it also, for a while. Sometimes a Firefox window goes completely black, for some seconds, then comes back; haven't noticed that for any other programs' windows. I have 4 monitors connected to this Mac and a bunch of internal drives, but everything was very stable until recently.
Info:
Intel Mac Pro, Mac OS X (10.6.7)
In snow leopard when I copy something and then paste it, it pastes what I had copied previously, not the most recent copy.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
So I was cleaning off my new Macbook Pro (a month old) the other day and noticed one spot wouldn't clean, I figured it may have been something stuck on there so I tried a little harder with no luck. I must of missed it, but there's a little piece of white dust (about 1px or so in size) behind the glass . I'm going to try to ignore it, but it's a little hard when you're as OCD about your electronics as I am, whenever I turn on my Mac it seems that my eyes drift over there. It isn't even that bad in my opinion, when I sit at a normal distance it's nearly unnoticeable, it's only when I look for it that I can see it.
View 2 Replies View RelatedI want to produce a logo for a piece of coursework so it doesn't need to be to professional or anything, but does anyone know of any free software or apps I could use?
Info:
MacBook Pro
I'm having an issue with my PowerBook G4. It wouldn't turn on at all before, so I installed another motherboard. Now it will power on, but it only shows this folder icon that blinks. I'm a complete n00b to macs. If this were a PC I would of fixed it by now. I need some help. I've tried the installation disk, but when I hold down the C key, it takes longer, but it just shows that folder again. When I hold down the Option key, it only gives me a reload button, and an arrow button, but no boot up options. Do you think it could be a problem with this other used motherboard? Or is it that I just didn't put it in right? I've double checked all the hardware, and it seems to be all connected. The keyboard lights up, and the trackpad works, and it makes the boot-up sound.
View 8 Replies View RelatedI'm sure you've all experienced this (if not then you don't have a unibody macbook pro, lol). I've had about 8 unibodies both 15" and 13" and the light grease fro the keys occasionally gets transfered to the screen in the shape of keys, and I've seen many people talk about a little piece of fabric (looks just like the screen cloth) they place over the keyboard to prevent this from happening. Anyone have an eBay or another online link to something like this? I think keyboard covers are silly, so just looking for the fabric solution.
View 24 Replies View Related