I am trying to install Ubuntu on Mac and for that I've created a bootable USB drive with Ubuntu on it. Now when I'm restarting my Mac and pressing Option key on keyboard, it is not giving me any option to boot from USB. I don't think its getting detcted even. USB is currently formatted in FAT format. Just wondering if there is any other format required?
Info:
MacBook Pro, Mac OS X (10.7.3)
I finally got my copy of Snow Leopard and want to do once more backup before installing. And now, my Macbook isn't detecting my Time Machine drive. This is sudden. It worked this morning. Macbook running 10.5.8. Time Machine drive is a USB WB MyBook.
View 9 Replies View RelatedI have a MacBook with Mac OS X and Windows Vista Pro installed. Having both of these OS installed as well as Xcode, this occupies a LOT of memory and there is very little else available. So, I have a 100 GB USB external drive. I am fairly new to the Mac and so need a little help. The USB port must be extremely sensitive. If anything barely touches the USB cord to the external drive, then Mac OS X cannot "see" the drive anymore and there is an error about properly ejecting a drive. The only way that I can get it to see the drive again is to boot into Windows Vista, restart and open Mac OS X again.
View 6 Replies View RelatedI was using my Mac (Macbook Pro 15" screen) and tried opening a file in GarageBand, at which point a warning message came up saying something about a midi file and something not being allowed, and then froze, resulting in me having to switch the computer off from the power button and restarting (Sadly I didnt realise that this would be the start of a whole host of problems and didnt make a note of the warning message). After rebooting I got the 'stuck on the blue screen with the Apple logo and infinitly spinning wheel' problem that i've seen in a few posts. having tried numerous suggestions posted with no change I ended up taking it to the genius section of an Apple store. When i got it back they said that it may have been a corrupted file, and that they re-installed and reset the starting programs (Something along those lines, I cant quite remember). I can now get onto the computer and use it, though some new problems have arisen.......
View 1 Replies View RelatedI have resolved my MacPro sleep issue by removing the Seagate 320GB stock drive. For whatever reason, if that drive is plugged in, it reboots my MacPro when waking from sleep. I had setup 2 WD 500GB drives in RAID 0 as my boot volume and this was configured with Windows XP Pro for other uses.
View 24 Replies View RelatedMy computer won't show my sd card and I have tried to google the problem but I couldn't find anything.
Info:
MacBook Pro, Mac OS X (10.7.2), iWorks
I have a 4Gb pendrive and when i connect it to windows it works but when i connect it to mac book air it doesnt even detect (Light on pendrive is there)
But nothing shows up on my Mac.
i tried formating to ntfs and to fat32 but bot doesn't have any effects
Macbook 2.4Ghz with Leopard 10.5.8, 320Gb drive (2 partitions)
Doing the standard upgrade install so I shove the SL disc in and run the installer, after an age it eventually reboots.
Then after another long wait the installer finally appears but when it asks to choose the drive to install to, my drive doesn't appear.
From the utilities menu, I can access disk utility and it only shows the DVD drive.
If I access system profiler my hard disk is still there in the SATA section.
Seems like I'm going to have format and do a clean install unless anyone has any ideas?
I have an annoying problem when I start up my external hdd in OS X. Let's say the location for the disk is: /Volumes/disk A. Sometimes (often) after a reboot or just a restart of the external hdd in OSX the location becomes: /Volumes/disk A 1. The system adds a 1 to the location of the disk!?!? Torrents cannot found the location of existing downloads and it's the same with my usenet client. The only way I've managed to solve the problem is to try to restart osx + external hdd until the location becomes /Volumes/disk A again (or recheck ALL torrents to the new location). I haven't found any logic when it goes back to the original place yet so often it takes a while to get it right.
View 7 Replies View RelatedI have a drive connected via USB 2.0 It's newly formatted with 2 partitions. Running 10.5.6 on a macbook.
The drive seems to work fine, the problem is whenever I reboot the two drives don't mount in finder.
When I look in disk utility. I can see the drive listed but the partitions are not.
I have to manually unplug and re insert the drive for it to function correctly.
I have a MacBook Pro from 2009. The airport has abruptly stopped finding any networks. I have had problems in the last few months (just after I moved to the states from Canada). My roommates' laptops could pick up the network, and mine kept dropping out. I went home for the holidays, and it worked fine (despite the router being even further from my computer).
when i returned, i had a few days of very spotty internet (much higher number of drop outs) and now it won't detect a single network. My warranty is up so i'm nervous that this is something internal they have to replace, but I"m hoping there is some way for me to check. I just tried to connect at work, and it detects nothing here too. so it is NOT interference.
sidenote: My graphics card is malfunctioning (which is under extended warranty for this model), and I am taking that to get replaced today... is there any crazy conceivable way that the two issues could be connected???
bottom line: what can I do now to rule out (or in) the possibility of hardware malfunction causing my airport to stop detecting networks?
This is my first MBP. I tried to connect it to my receiver with HDMI cable, and nothing happened. When I connect it to my windows computer it works flawsley. I'm not really sure if there is something I need to do. All I did was plug it in.
Info:
Windows 7
my MacBook Pro audio from the headphone jack just decided to stop working. The weird thing is, in system preferences, the computer is detecting that I've plugged in headphones. I can even control the volume and click play/pause from the control on the headphone wire, just no audio.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I purchased a Q-Drive Q 1TB in Dec for my 24" iMac, purchased it at a Apple Store. I was connected with 800firewire cable, all seemed to be working ok, time machine etc. But in the past month the drive has become a nightmare, it will just disconnect at random. At that point i cannot get it to mount, unless I reboot my iMac. I have tried to connect with 400firewire and usb2, but the same problem persists. Needless to say I am somewhat annoyed, it was not cheap. Anyone have any advice on what I should do, I'm scared to go to G-Tech for support as what I could find appears to be a nightmare. Would I be able to return this to the Apple store that I bought it from?
View 3 Replies View RelatedProblem exists on MacBook Pro (15", Late 2008) and MacBook Air (11", Late 2010) using a mini-displayport -> VGA adapter. When an external monitor (Dell E177FP) is connected it is recognized but appears as a "VGA Display". No problems with usage, however when the mac is put to sleep the monitor sees it as a no signal situation and displays its built in test instead of going into powersave mode. When I first hooked up the monitor I was using an old cable that was most likely damaged (screen was showing alot of artifacts) but this problem did not occur and the display slept fine. I then bought a new Belkin 6' VGA cable and have had this problem ever since.
I compared the two cables and noticed the new one had the #9 pin, where the old had just a blank. Thinking maybe this old monitor didn't like to have the 5V coming in I modified (Read: ripped out pin #9) my new cable to no avail.
Info:
MacBook Pro, Mac OS X (10.7.4)
I currently have a wireless router with a functionality called ReadyShare and I also have a 320GB external USB HDD. I would like to be able to plug my HFS+ formatted HDD into my router and be able to use it as a wireless backup solution for Time Machine. The problem is that the router doesn't even detect the HDD so it is unable to share it throughout the network.
Another solution I had thought of was to connect the device to a Windows tower downstairs and then share it throughout the network. The problem here is that there is no free (read: FREE) software that I know of that allows Windows to detect HFS+ formatted drives in Windows Explorer in order to share them.I do know of software that lets Windows read them but there isn't anything that I know of that lets them be mounted in My Computer and treated like a normal drive.
This got me thinking... What if I install the Boot Camp drivers onto the machine downstairs. If I recall correctly, the Boot Camp drivers let Windows do exactly what I am trying to do. But I don't know if this is possible due to hardware differences, etc.
I have installed my hard drive from a previous but terminally I'll iMac that was running Snow Leopard into a Sata to USB enclosure. This is displaying on the desktop of my new iMac running Lion as an external Hard drive,also system preferences sees it as a start up source.My question is , is it safe to restart into Snow leopard without causing a kernel panic and if it does boot will it be fast enough to use as it as a USB drive.
Info:
iMac, Mac OS X (10.7.2)
From time to time I have to perform a factory reset on my airport express due to connection problems. I am now very familiar with this process and it has become routine. This time however I am experiencing problems connecting with my macbook. It will be working perfectly but will suddenly lose connection. No bars on the symbol and when I detect networks it recognises all my neighbours but mine is not in the list. The airport utility does not detect it either. The green light is on on my airport and if I use my iphone it connects perfectly. If I come back 30 mins later the laptop will have connected again.
View 5 Replies View RelatedThis is the first time I've tried using my built-in iSight since the 10.6.5 update, and on any site I've tried it, it doesn't show USB Video Class Video, the correct option, as a selectable option. Nor is DV Video and option. Only Built-In iSight, and two "Google" cams, none of which work. Actually, on Tinychat, Built-In iSight works for the thumbnail for picking the cam option, but won't work once selected. But that's always been the case; the proper option won't show as a thumb but works fine once selected. I hope I'm making sense.
Any solutions? Adobe says I'm running version 10,1,102,64.
Update: It seem either uninstalling Google's video and audio adapters </Library/Application Support/Google/GoogleVoiceandVideoUninstaller.app> or installing a beta version of Flash [URL] solves the issue.
I'm having major problems with airport. It seems that lately its become less and less effective at detecting wireless networks. I need to be sitting a few feet away from a router for my macbook (10.4.11) to detect it. This occurs with all networks. I never had this problem until the past year and its seemed to get progressively worse. I'm not sure if this is a confrontational or hardware issue.
View 2 Replies View RelatedI just picked up my new Mac Pro, and have it set up in the living room, much to my girlfriends' chagrin, while I wait for my new monitor to arrive. Anyways, I have it plugged into the TV so I thought to myself, 'why not plug it into my surround set as well?' I went ahead and plugged my stereo receiver into my Mac Pro's Optical Out port, but the Pro doesn't seem to be detecting my stereo, as I cannot select the digital audio as a device for sound output. So, in the meantime, I am stuck with 2.1 through the line out jack.
View 6 Replies View RelatedHow do I? The specs, in case you know what revision it is:1GHz PPC G417" widescreen 1GB RAM/60GB HDDAirport Extreme and BluetoothGets really hot too.So is there a way to see which revision my Powerbook is?
View 1 Replies View RelatedI've got Windows 7 RC 64-bit installed on a 2.53 GHz MacBook Pro (dual boot using Boot Camp) with an ExpressCard slot. I also got a FileMate SolidGO 3FMS4D48M-WR 48GB ExpressCard SSD; the drive works beautifully under OS X, but is not recognized at all by Windows 7 when it's in the ExpressCard slot. In Device Manager, the yellow caution icon appears in front of the Standard ACHI 1.0 Serial ATA Controller under IDE ATA/ATAPI controllers. The drive does not show under Disk drives or in Disk Manager.
The corresponding Device Status message is: "This device cannot find enough free resources that it can use (Code 12). If you want to use this device, you will need to disable one of the other devices on this system." The drive is recognized as SATA under Mac OS X and also works fine in Windows when plugged into a USB port instead of the ExpressCard slot (at which point it is not treated as SATA, but USB). I've tried the latest Boot Camp drivers, but that has no effect.
I want to import videos from my vidcam into final cut studio, so I can play with it there. However my new mac can't detect the vidcam, it does however detect when the vidcam is plugged in, however it only recognizes it as a usb type device not as a vidcam. So I phoned apple and asked for assistance, they suggested updating the software(which i did). This however did not help, as the vidcam is still just a "memory space". I can access the videos but they are in MTS format, which is not supported in final cut studio and I would prefer to work directly from the vidcam and not use a video converter to convert them first. So basically to put it in one sentence how do I get my mac to recognize my sony hdr sr12 video camera, as a camera and not a unknown usb type device.
View 2 Replies View RelatedI got myself a new battery for my iBook Clamshell however it won't detect it and thus runs off AC power.
View 1 Replies View RelatedOkay I'm thinking that my iMac 20" (a1224) has a virus after I started playing with Limewire...When I press the power button the only thing I receive is the Apple logo and the spinner below it as if something is about to happen but it never does. I even let it sit overnite hoping for something and no results. I purchased the computer from some random so there is no disc.
View 1 Replies View RelatedRecently I am having issues with the screensaver setting, it comes on every time I reach the log-in page while booting, and instead of turning on after 'x' minutes of inactivity it just gets turned on after 'x' minutes. Means if I slide it to 5 minutes, I get the screensaver on after 5 mins, be it doing work or watching a movie in it.
Macbook Pro Mid 2010 15" 2.66GHz I7
OS X Lion 10.7.4
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.4)
I have a LaserJet 5P. When I install it, I don't get the option to select that it's postscript or non-postscript. Consequently all of my documents look like userdict()print flush}%%BeginFeature which is very rarely what I wanted.
Why is my computer obsessed with postscript? How do I remove printer drivers?
Reason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios:
1. I get no signal whatsoever and my AirPort doesn't even detect the network
2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found"
3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know:
-Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here?
-I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
I have recently purchased Apple macbook 13" 2 Ghz, 2GB laptop and I am
using it in dual boot (MAC leopard and Windows XP) . Recently I have
purchased external Headphone of Creative (HS-390) and tried hell like things
in WINDOWS XP but it is not detecting my Microphone....The headset is working
fine the only problem is with Microphone (I have tested Microphone on Desktop
