MacBook :: Macbook Not Detecting Airport And Iphone Does?
Aug 7, 2010
From time to time I have to perform a factory reset on my airport express due to connection problems. I am now very familiar with this process and it has become routine. This time however I am experiencing problems connecting with my macbook. It will be working perfectly but will suddenly lose connection. No bars on the symbol and when I detect networks it recognises all my neighbours but mine is not in the list. The airport utility does not detect it either. The green light is on on my airport and if I use my iphone it connects perfectly. If I come back 30 mins later the laptop will have connected again.
View 5 Replies
ADVERTISEMENT
Jan 13, 2011
I have a MacBook Pro from 2009. The airport has abruptly stopped finding any networks. I have had problems in the last few months (just after I moved to the states from Canada). My roommates' laptops could pick up the network, and mine kept dropping out. I went home for the holidays, and it worked fine (despite the router being even further from my computer).
when i returned, i had a few days of very spotty internet (much higher number of drop outs) and now it won't detect a single network. My warranty is up so i'm nervous that this is something internal they have to replace, but I"m hoping there is some way for me to check. I just tried to connect at work, and it detects nothing here too. so it is NOT interference.
sidenote: My graphics card is malfunctioning (which is under extended warranty for this model), and I am taking that to get replaced today... is there any crazy conceivable way that the two issues could be connected???
bottom line: what can I do now to rule out (or in) the possibility of hardware malfunction causing my airport to stop detecting networks?
View 3 Replies
View Related
Dec 10, 2009
I'm having major problems with airport. It seems that lately its become less and less effective at detecting wireless networks. I need to be sitting a few feet away from a router for my macbook (10.4.11) to detect it. This occurs with all networks. I never had this problem until the past year and its seemed to get progressively worse. I'm not sure if this is a confrontational or hardware issue.
View 2 Replies
View Related
Feb 8, 2008
Reason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios:
1. I get no signal whatsoever and my AirPort doesn't even detect the network
2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found"
3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know:
-Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here?
-I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
View 2 Replies
View Related
Dec 29, 2009
Was hoping I could get a tip with a problem I'm having. I just set up an aiport extreme and connected an NAS to it (which is running linux). I am able to access the NAS off of my laptop BUT apparently I need the IP adress of the actual device to fully access software on it. I know the adress of my router by using the airport utility, but could anybody advise me as to how I could get the IP adress of my Nas? I'm running OS X 10.6 incidentally.
View 1 Replies
View Related
Nov 18, 2010
So I have the 2010 White Unibody 2.4Ghz Macbook and the airport works perfectly fine whether I am at home, the library, school, etc. The problem I am having with it is when I am at home and using the airport, and my iPhone is also connected to the same network, the wifi will work on my iPhone but will stop working on my Macbook. It still shows I am connected but it will not connect to any webpages. As soon as I turn off the Wifi on my iPhone and refresh the page on my Macbook, it will load. Is there anything I can do to fix this. By the way, My Toshiba laptop has no problem with using Wifi the same time my iPhone is connected to it, my Macbook is the only one having problems.
View 2 Replies
View Related
Mar 23, 2012
I am trying to install Ubuntu on Mac and for that I've created a bootable USB drive with Ubuntu on it. Now when I'm restarting my Mac and pressing Option key on keyboard, it is not giving me any option to boot from USB. I don't think its getting detcted even. USB is currently formatted in FAT format. Just wondering if there is any other format required?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 5 Replies
View Related
Apr 14, 2012
My computer won't show my sd card and I have tried to google the problem but I couldn't find anything.
Info:
MacBook Pro, Mac OS X (10.7.2), iWorks
View 8 Replies
View Related
Jun 23, 2014
I have a 4Gb pendrive and when i connect it to windows it works but when i connect it to mac book air it doesnt even detect (Light on pendrive is there)
But nothing shows up on my Mac.
i tried formating to ntfs and to fat32 but bot doesn't have any effects
View 2 Replies
View Related
Jun 21, 2012
This is my first MBP. I tried to connect it to my receiver with HDMI cable, and nothing happened. When I connect it to my windows computer it works flawsley. I'm not really sure if there is something I need to do. All I did was plug it in.
Info:
Windows 7
View 13 Replies
View Related
Aug 30, 2014
my MacBook Pro audio from the headphone jack just decided to stop working. The weird thing is, in system preferences, the computer is detecting that I've plugged in headphones. I can even control the volume and click play/pause from the control on the headphone wire, just no audio.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
May 31, 2012
Problem exists on MacBook Pro (15", Late 2008) and MacBook Air (11", Late 2010) using a mini-displayport -> VGA adapter. When an external monitor (Dell E177FP) is connected it is recognized but appears as a "VGA Display". No problems with usage, however when the mac is put to sleep the monitor sees it as a no signal situation and displays its built in test instead of going into powersave mode. When I first hooked up the monitor I was using an old cable that was most likely damaged (screen was showing alot of artifacts) but this problem did not occur and the display slept fine. I then bought a new Belkin 6' VGA cable and have had this problem ever since.
I compared the two cables and noticed the new one had the #9 pin, where the old had just a blank. Thinking maybe this old monitor didn't like to have the 5V coming in I modified (Read: ripped out pin #9) my new cable to no avail.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Aug 11, 2010
I currently have a wireless router with a functionality called ReadyShare and I also have a 320GB external USB HDD. I would like to be able to plug my HFS+ formatted HDD into my router and be able to use it as a wireless backup solution for Time Machine. The problem is that the router doesn't even detect the HDD so it is unable to share it throughout the network.
Another solution I had thought of was to connect the device to a Windows tower downstairs and then share it throughout the network. The problem here is that there is no free (read: FREE) software that I know of that allows Windows to detect HFS+ formatted drives in Windows Explorer in order to share them.I do know of software that lets Windows read them but there isn't anything that I know of that lets them be mounted in My Computer and treated like a normal drive.
This got me thinking... What if I install the Boot Camp drivers onto the machine downstairs. If I recall correctly, the Boot Camp drivers let Windows do exactly what I am trying to do. But I don't know if this is possible due to hardware differences, etc.
View 3 Replies
View Related
Oct 2, 2010
I have an iPhone 3GS and so does my brother.I control what devices can get on my airport by restricted MAC address access.
However, when my brother is browsing our 10mb fibre optic powered broadband internet on his iPhone 3GS my MacBook Pro gets DOG SLOW and sometimes just doesn't even load pages - just says "Safari is not connected to the internet".
I'll go on my iPhone 3GS to test the internet to load a page and BOOM comes up right away.
Can I order the distribution of preference from the airport to give the best speed to certain devices in preference order?
View 3 Replies
View Related
Feb 22, 2009
I have a PM G5, MBP and iPhone all sharing off an Airport Express. It's worked fine since I bought it a few years ago.Yesterday I opened up the G5 and blew all the dust out. I've done this several times before, without problems.I also zapped the PRAM and reset the SMU.Anyways, so I started up and all is well. Things are going smoothly. I open up a Safari window and the page doesn't load, or takes several minutes to load. Pages still load up quickly on my MBP and iPhone. It's not just the internet that is sluggish. It's very slow moving trying to access files from the G5 over the network on the MBP.Anyways, I've repaired the permission, reset the the Airport Extreme card and I'm now out of ideas on what to try next.
View 14 Replies
View Related
Mar 20, 2009
In the next few days my setup will include an iMac that is n compatible, two apple tv's and two iphones. I also have a powerbook that won't use 'n', however this will be of nominal use.
I want to set it up where it's as fast as possible - especially for the apple tv's, but thinking the iphone will slow it down. Is this the case?
View 9 Replies
View Related
Jan 27, 2010
I don't have internet access at home, instead tethering to my iPhone via USB when needed. However I do have a local Airport network set up for Airtunes streaming. The problem is that if connect to my Airport network, my computer no longer connects to the internet via USB tethering since it apparently expects to connect over wifi. Is there a way to simultaneously be online via USB tether AND stream music over Wifi? I'd also like to be able to print over wifi, but that's less of a concern.
View 5 Replies
View Related
Jul 14, 2009
I use a hard drive on my local network for all the mac users in the house. Is there a way to connect the iphone to the hard drive files?
View 2 Replies
View Related
Sep 15, 2009
I have had an Airport Extreme for two years now.
I have several devices connected to my wireless network.
MacBook, VistaPC, Printers, AppleTV etc, etc, etc,....
Just recently, my iPhone and the kid's iPod Touch keep getting dropped from the network. The wi-fi icon disappears, and my 3G icon comes up. I'm standing right next to the Airport !!
Sometimes i can reset my wireless and it stays stable for a couple days, but then it happens again.
View 1 Replies
View Related
Mar 18, 2010
I'm seriously considering buying the iPad wifi. Without a LAN port, I was wondering how I would be able to connect the iPad to the internet when I'm travelling. Then I read up about portable routers and lo and behold, the Apple Airport Express was mentioned.So, would this set up work in a hotel?
1. I plug the Airport Express to the hotel high-speed internet via LAN cable
2. I connect my work notebook (much loathed Lenovo Thinkpad running WindowsXP Pro) using wifi to the internet via the Airport Express
3. I connect my iPhone to the internet via the Airport Express (using wifi of course)
4. I connect my iPad to the internet via the Airport Express (using wifi)
If the above will work, is setting up Airport Express to the hotel high-speed internet via LAN cable an easy or hard exercise?
View 8 Replies
View Related
Aug 6, 2010
Right now I have have an external HDD connected to my MacMini, have my iTunes library on the external HDD and then set that library as the library on my iMac. That allows me to sync my iPhone with my MacMini's external HDD when over wifi when connected to my iMac. However, when I move that same external hard drive to the Extreme, set it as my iTunes library on my iMac I can watch video and listen to music on my iMac, but when I try to sync the iPhone iTunes just gives me a beach ball and I have to force quit. I find it strange that I can sync my iPhone to my MacMini's external hard drive over the network when I connect my iPhone to my iMac, but I can't sync to that same external hard drive when I have it connected to my Extreme. Am I doing something wrong or is that functionality just not there?
View 2 Replies
View Related
Jul 23, 2009
I can't seem to get my Macbook Pro 13" 2.26Ghz (OS 10.5.7) connect to my iPhone 3G (OS 3.0) via bluetooth. In the Bluetooth Setup Assistant the macbook sees the iPhone 3G, but they don't connect after I accept the connect on the iPhone 3G. The codes on the Macbook and iPhone are the same and, therefore, should connect.
I've searched the Apple Discussions (support) but there is no answer there.
View 1 Replies
View Related
Apr 14, 2009
I just set up a second AirPort Express - connected to the home stereo - to allow the Mac laptops to push iTunes music to the home stereo system wirelessly. This worked on the first try. See, I'm a recently converted PC guy... I'm used 15-20 attempts followed by a few calls to the tech support...
So, as soon as the novelty wore off (it hasn't completely) I tried to network the iPhone... couldn't do it. I can't find where to swap the speaker from "Computer" to "Stereo" (the name assigned to the AirPort).
Is this possible? Should I just be happy with the laptop?
View 2 Replies
View Related
Jul 17, 2009
I've got a softmodden XBOX (1) with a 500GB HDD wich I mainly use to watch movies on my tv (XBMC). I've got an MacBook and an iPhone wich syncs with the MacBook. Is there any way I can tell my MacBook iTunes library that the mp3's and movies are on a shared map of the XBOX?
What I want is this:
- Watch movies and listen to mp3's on my XBOX with XBMC in the livingroom (already doing that)
- Sync my iPhone with the iTunes on my MacBook with mp3's/movies from the XBOX
- Use an Airport Express in my studyroom with the mp3's on my XBOX
(I'm also planning to use a part of the 500GB XBOX HDD for Time Machine, but that's a different story)
View 1 Replies
View Related
Sep 11, 2014
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router.
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.
Info:
Airport Extreme
View 1 Replies
View Related
Jul 6, 2012
Im abel to be connected to airport sometimes but then my airport stops working completly. the airport symbol is blank ( white) and when i hover over it it says its not installed.
Info:
MacBook
View 1 Replies
View Related
Nov 11, 2010
This is the first time I've tried using my built-in iSight since the 10.6.5 update, and on any site I've tried it, it doesn't show USB Video Class Video, the correct option, as a selectable option. Nor is DV Video and option. Only Built-In iSight, and two "Google" cams, none of which work. Actually, on Tinychat, Built-In iSight works for the thumbnail for picking the cam option, but won't work once selected. But that's always been the case; the proper option won't show as a thumb but works fine once selected. I hope I'm making sense.
Any solutions? Adobe says I'm running version 10,1,102,64.
Update: It seem either uninstalling Google's video and audio adapters </Library/Application Support/Google/GoogleVoiceandVideoUninstaller.app> or installing a beta version of Flash [URL] solves the issue.
View 9 Replies
View Related
Aug 25, 2010
I just picked up my new Mac Pro, and have it set up in the living room, much to my girlfriends' chagrin, while I wait for my new monitor to arrive. Anyways, I have it plugged into the TV so I thought to myself, 'why not plug it into my surround set as well?' I went ahead and plugged my stereo receiver into my Mac Pro's Optical Out port, but the Pro doesn't seem to be detecting my stereo, as I cannot select the digital audio as a device for sound output. So, in the meantime, I am stuck with 2.1 through the line out jack.
View 6 Replies
View Related
Sep 30, 2006
How do I? The specs, in case you know what revision it is:1GHz PPC G417" widescreen 1GB RAM/60GB HDDAirport Extreme and BluetoothGets really hot too.So is there a way to see which revision my Powerbook is?
View 1 Replies
View Related
Sep 10, 2009
I've got Windows 7 RC 64-bit installed on a 2.53 GHz MacBook Pro (dual boot using Boot Camp) with an ExpressCard slot. I also got a FileMate SolidGO 3FMS4D48M-WR 48GB ExpressCard SSD; the drive works beautifully under OS X, but is not recognized at all by Windows 7 when it's in the ExpressCard slot. In Device Manager, the yellow caution icon appears in front of the Standard ACHI 1.0 Serial ATA Controller under IDE ATA/ATAPI controllers. The drive does not show under Disk drives or in Disk Manager.
The corresponding Device Status message is: "This device cannot find enough free resources that it can use (Code 12). If you want to use this device, you will need to disable one of the other devices on this system." The drive is recognized as SATA under Mac OS X and also works fine in Windows when plugged into a USB port instead of the ExpressCard slot (at which point it is not treated as SATA, but USB). I've tried the latest Boot Camp drivers, but that has no effect.
View 1 Replies
View Related
