How do I? The specs, in case you know what revision it is:1GHz PPC G417" widescreen 1GB RAM/60GB HDDAirport Extreme and BluetoothGets really hot too.So is there a way to see which revision my Powerbook is?
Reason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios: 1. I get no signal whatsoever and my AirPort doesn't even detect the network 2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found" 3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know: -Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here? -I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
I have posted this in the Boot Camp thread as well as this one because chances are that more people with a MBA would read this Forum Area. If this is violating the rules of Mac Rumors than please PM me and I will delete the threadI have my MacBook Air which I have installed Windows Vista on and have installed all the drivers from the included DVD. I am reselling it to a friend who wants me to reinstall Windows on it. This is fine but it seems I have stupidly misplaced my Driver Disk so I was wondering if any of you good souls who have a MacBook Air could upload the files. Also is this the right place to put this topic or should it be in the MacBook Air forum?
I am thinking about picking up the 2nd revision but I want to know if it can do a couple of things that Rev A could not. 1) Hulu.For those with a fast connection, either ethernet or wifi it doesn't matter. I don't want the "connection" to be the variable. Test if Hulu works. Open up a show you like, watch a full show in your lap preferably and see if it stutters. It doesn't have to be the HD Option, but regular and full screen. What's the temps like? How is the heat in your lap? Rev A, without coolbook could not last more than 20 minutes before starting to stutter.If it doesn't stutter, can you try the HD Option? First without full screen then with full screen. Any stutter?
Out of these 10, vote for 4 that you would add:Core 2 Duo 2.53 GHznVidia GeForce 9600 GMTSupport for 4 GB RAMGlass trackpaUSB 3.0Faster/larger SSD drivesBetter speakers (stereo?)FireWireLonger battery (7-8 hours)Cooler/quieter
It says it SATA II? 128GB SSD 1.8' SATAⅡ MLC/for macbook air 2st/sony TT17N Item number: 270421745116 Drive Capacity :128GBrand :King SpeInterface :SATA II
I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine? 2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?
If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?
Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...
I have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..
Type: DDR SDRAM Speed: PC2700U-25330
And these are the types i've been seeing to choose from.
I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.
I know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?
I bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?
I believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]
I did the latest firmware update few days ago and went through that series of boots. It's a shame on me that I didn't jog down the ROM revision info before the update. According to the this link:
[URL]
The FM Rev should be MBA31.0061.B01 after the update.
My MBA 13 is still read MBA31.0061.B00 after I thought I did the update. Does that mean the update didn't go through?
What do you think the chances are? I see a lot of talk about the possibility of an i3 in the base model 13". Is it wrong of me to find that absolutely absurd as you can pick up a PC with i5 for ~�500. Should we not be expecting AT LEAST i5 with perhaps BTO for i7? Now that would give the MBP 13" the 'Pro' title it acclaims (along with other aspects of course). Also, how about the current outlook for dedicated graphics in any of the new models? For it to be worth adding a dedicated GPU it must be a worthy leap ahead of the integrated GPU in sandy bridge, is that sort of performance increase do-able in a laptop?
FYI i'm a current PC owner looking to make the big switch to accompany my Music Production degree at university, I've been holding out for a new MBP for some time now. I really hope it's worth the wait. And as for hoping for dedicated graphics, i'm a keen gamer and would very much like to be able to use one computer for everything and ditch my old desktop.
defective screen or this model is supposed to be darker. I have a 2.53Ghz Core 2 Duo MacBook Pro (the last revision) and the new 2.4Ghz i5 MacBook Pro which I just bought today.I noticed the i5 screen is much dimmer, it is the same manufacturer but the model is 9CA4. The Core 2 Duo MacBook Pro model is 9CA3.Are the 9CA4 models supposed to be darker or do I have a defective screen> I wanna know so I can go and exchange it
Just replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.
3 beeps 3 lights (1 long + 3 quick flashes)
I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?
I am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!
But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?
This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.
[URL] This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM
I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?
My PowerBook 12" 1.5G has 100% CPU usage when playing back the new TV program from iTunes store. And sometimes it even choke.
While I have no virus scanning software, some programs running such as Opera, iTunes, Entourage and have about 20% CPU usage when idle.
Why is it so slow on a PowerBook while you can actually play that video on an iPod? Is it the iPod too powerful or it is just because apple did not optimize enough for older Macs (pushing people to new hardware)?
I have just ordered a new iMac but I am not happy about my PowerBook which is just one year old.
I have an older 15" G4 Powerbook (before the recalled Powerbooks with the RAM slot failures) that has recently been experiencing some speed issues. To my dismay, when I checked my 'About This Mac...' I no longer had 1GB of RAM, only a lowly 512 MB. Tonight I sat down and started swapping and removing my two sticks of RAM and as it turns out, something is up.
With a 512 stick in the lower slot, System Profiler tells me I have 512 MB of RAM and that the upper slot is empty. When I put the other stick in the upper slot (leaving the lower one in), System Profiler now says I have 512 MB of RAM and that the lower slot is empty. Does this look to be a (out of warranty) logic board failure? Is there anything else I can try to do? On a related note, when removing the screws from the RAM panel on the bottom of my PB, one screw fell into my Powerbook, never to be seen again. Is this going to cause any problems down the line?
I restarted and nothing. Still dim. I can barely, barely see things like if I hit expose, I can see shifting rectangles.
Also, I've been having this issue where the keyboard mostly stopped working -- if I hit kjjh, it'll come up as 3443 or something. It's usually fixed with a restart.
I have it covered by a year of applecare until feb 24, 2007 -- but I haven't registered it yet. Should I register and then call apple or what?
This comes at a REALLY bad time. I have design projects coming up everywhere and of course, despite my $250 external hard drive, i haven't been backing things up because I'm an idiot.
Can I hook it up to a external monitor just to make a backup of my hard drive?
My Friend has a 15" Powerbook (2nd last rev.... 1.67ghz with lo-res screen) and it's been on the fritz lately. It operates completely normal and then it suddenly goes to sleep. When I wake it up it's back to normal just fine. It goes to sleep after about 3 minutes of use.