i am new to macs, i have a macbook pro and i am looking for a cd/dvd burning software that can burn audio/mp3 cds, data dvds etc.
i used Nero in windows. what is the best program out there for macs?
Also is there any free program that will do a decent job?.
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
View 2 Replies View RelatedEverytime I burn a DVD I get an error. It burns the DVD but when it verifys the disc I get an error. I have Leopard install everything else is working fine. How can I fix this?
View 4 Replies View RelatedOn my MacBook I would like to burn a iso image to a cd. I dont think my burner burns DVDs so I am wondering if I can burn it to a CDR and if it will still work when I try to install?
P.S. I attached a screen shot of the type of burner I have =)
Why my mac (no matter iMac or macbook) can not read DVD data disk which was burned more than twice by Nero on Windows. My Mac can alway only read the data from first time burned.
For example, the DVD burned data A by Nero on Windows. Several days later I burned data B into the DVD. Then, it's data C.
Info:MacBook
Macbok Pro Mid 2009 13"
OS X 10.7.4
Superdrive: HL-DT-ST DVDRW GS23N:
I was hoping someone could recommend a DVD-R brand that they've used, successfully, in their Macbook. The ISO is 3+ GB.
Info:
MacBookPro, Mac OS X (10.7.4)
I have the new 2.4 aluminum macbook and today for the first time I started burning cds and I noticed the whole computer vibrates pretty strongly. Is that normal? Also if i pick up the macbook and move it slightly while its burning it makes a weird noise. Is that normal also?
View 3 Replies View RelatedI just purchased Toast 10 Titanium Pro with the hopes of being able to burn blu-ray DVDs using my MBP which I purchased last December (2008) with a CD/DVD burner: MATSHITA DVD-R UJ-868.
Do I need to purchase a special blu-ray drive (internal or external) to do this? I was told by my Apple rep that my dvd burner was fine and that I needed to use Final Cut Pro. I read that Toast 10 Titanium Pro was also compatible to make blu-ray DVDs.
How long does it usually take to burn a movie (approx 700mb - 1GB lasting roughly 2hours) on a new macbook pro 13" ? My friend has an macbook alu and she said it took her 6 hours to burn a movie. We have a hunk a junk PC with a DVD burner and took 2 hours to burn a DVD. Anyway I can speed things up?
View 4 Replies View RelatedI am using Idvd to burn a DVD.
I take it i allow it to encode. Then hit the burn button, let it burn, eject, put in my DVD player, hit play, sit back and watch?
I have a bunch of media files (videos) that I want to store onto a CD-RW so I'm not wasting any unnecessary HD space on my Mac. However, when I attempted to do so it created a seemingly permanent file directly on my desktop with those videos that I cannot delete without compromising my ability to ever view those files again. In so doing, I seem to be unintentionally duplicating media files and decreasing the space on my HD as a result. How might I save video files to a simple CD without having to have a copy on my system to be able to view them? The file in question has the "burn" icon on its cover. You see, just to test myself, I tried to delete it in my trash can, and it wouldn't allow me ti view those videos and movies without first re-instating that duplicate file. The filre originated as a CD until the burning phase was completed.
Info:
MacBook Pro, iDVD
I cannot succesfully burn a DVD on my MacBook Pro - just keep getting an error message. What is wrong please?
View 1 Replies View RelatedI created a movie in iMovie and now I am working in iDVD, I finished the project and have tried several times to burn it to a blank DVD. It goes through most of the process but right before it should be done burning it ejects the DVD. So I've tried putting it back in and it does the something all over again.
Info:
MacBook Pro, Mac OS X (10.5.3)
I am using a MacBook Pro 13" (Mid 2012) and I have a DVD-R and I have a .avi file that I want to burn on this DVD. I want this DVD to work on my Mac, PC and my DVD PLAYER. How can I do this?
Info:
MacBook, OS X Mavericks (10.9)
Is there a single efficient, fast, quality dvd burning program for mac? I am using osx 10.6.4. I can't find one, free or otherwise, that works well and takes less than an hour and a half. This includes idvd. I will never own another type of computer, and I don't miss PC, but my acer could burn a quality dvd in 45 minutes.
View 5 Replies View RelatedHave got a macbook unibody, got this about 6 months ago. I put a blank dvd+r in today and used toast to burn some files to it. finished burning but the disk will not come out, have tried ejecting and it says its not there no more but has not came out, have also restarted and it see's the disk again and can be read but then if you eject it still does not come out, have tried cmd e, eject button, disk utility, any idea's or should i take it to apple to be fixed/swapped out, not sure which they do
View 3 Replies View Relatedi have a macbook late 2008 aluminium, just tried to burn something to a dual layer dvd with roxio toast 10, it failed and now the disc is stuck in the drive.
View 5 Replies View RelatedSo I have an old Windows 98 that I have a buyer for. So I'm removing everything from it and giving her a fresh computer, and to do that I obviously need a Boot CD.
So I have an ISO file and all that. On the Windows 98 it has Nero Express but for whatever reason it is not allowing me to create a Boot CD.
So I need to use my other computer, which is a 10.4.11 Macbook. And I canot find an application that can burn a disc like this. I've searched the internet for this application and cannot find it.
One day I inserted a CD in my Mac, nothing popped up. So I went into my mac hardware list and clicked on "Disk Burning". I get the following message. "No disk burning device was found. If the device is external, make sure it's connected and turned on." I currently am using a mid-2007 Macbook Pro installed with OS X 10.6.8, It is an Intel Core Duo. I have run Disk Utility and it told me to insert the installation disk and run Disk Utility from there.
I have tried rebooting the computer while holding C and nothing happened. I think the computer can not see the CD Drive so therefore, it will not load the disk. Also, I have considered doing a complete wipe of the hard drive and reinstalling but I have programs (Adobe, Parallels, etc,) that I do not have the disks for. If I was forced to do a full re-install, how could I save these programs from being wiped out and then re-install them cleanly back?
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
I connot burn a DVD. I get the message "The burn to the HL-DT-ST DVDRW GS23N drive failed. The burn failed because of a medium write error." I re-booted, tried different brands of DVDs and slowed the burn speed with no results.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have not been able to compete a burn process
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I'm trying to burn some data using DVD+R DL using my 17in MBP w/New Toast Titanium.. Unfortunately, its giving me an error and can not burn it. Anyone experienced this issue? Any solution to this problem??
I have the following hardware: MATSHITA DVD-R UJ-846
last week i tried burning a dvd using roxio toast, but before it began to burn it says the following error: the drive reported an error: sense key = medium error sence code = 0x73, 0x03 i tried to use another dvd, but it is saying the same error (i have been using the same brand of dvd before but never encountered such problems), so tried to restart, and it proceeded to burn, no more errors, so i thought it was only a one time thing, so today, i tried burning again, the same thing happen, the same error, i tried 4 dvd's but the same error keeps on happening, but when i restart the macbook pro, it would proceed to burn with no errors. i wonder what seems to be the problem? my dvd drive or the software? anyone encountered the same problem before?
View 1 Replies View RelatedDo any of the MBP's contain a drive that supports burning a label on a DVD with the laser?
View 1 Replies View RelatedThis is my first post, so please be gentle! I have a 2006/7 White Macbook Core2Duo 2.10Ghz, and I love compiling my own movie compilations via iDVD. The problem that I have is two fold; 1. I burnt 4 episodes of a Public Domain TV Show (3 Stooges) using one of the current menus, and it compiled lovely, burn to disc and verified, but then no sound from the episodes, even though on my master PC, the sound is there, and sound is also present when I copied to my Macbook. 2. I have tried another few discs, each time iDVD states that the disc could not be verified and that the disc is unreadable. Both have been burnt at 6x (my combo/super drives max). Do I possibly need a new drive? Is it worth me burning the project to TS_VIDEO folders on my desktop then burning them via Toast? Any advice would be greatly appreciated, as I'm wanting to delve deeper into iDVD and iMovie as I think they are spot on programs.
View 3 Replies View RelatedI dropped my MacBook by accident earlier today and circa three hours later I am experiencing problems I have never encountered before. Now, my MacBook shuts off every 15 minutes or so and the last time it shut off, the screen went completely dark and the computer began making a regular beeping noise, and it smelt like something was being burnt... Lately I have also been noticing that when charging the charger tends to get heated up easier than before, and to higher temperatures as well.
Info:
MacBook Pro, Mac OS X (10.6.7)
I have a 1st generation macbook pro and I am running OSX 10.4.11. For some reason, every time i try to burn a disk or if I am watching high resolution video the computer will just crash and completely shut off. It only happens if I am doing one of these two things. Everything always seems to be fine when I turn it back on.
View 1 Replies View RelatedI keep trying to burn a CD-R, and every time itunes stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome.
View 24 Replies View RelatedThe information of disk burning is as follows,
HL-DT-ST DVDRW GWA4080MA:
Firmware Revision: AE39
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
My Magsafe adaptor is so hot right now that it almost burns me to hold it. It also smells pretty warm, like a heater. This can't be normal can it?
Should I be alarmed? My 13.3" UMBP is only 3 months old...
