Applications :: Burning Windows Boot CD's On Macbook?
Aug 12, 2010
So I have an old Windows 98 that I have a buyer for. So I'm removing everything from it and giving her a fresh computer, and to do that I obviously need a Boot CD.
So I have an ISO file and all that. On the Windows 98 it has Nero Express but for whatever reason it is not allowing me to create a Boot CD.
So I need to use my other computer, which is a 10.4.11 Macbook. And I canot find an application that can burn a disc like this. I've searched the internet for this application and cannot find it.
View 3 Replies
ADVERTISEMENT
Jan 24, 2008
if y'all are kind enough to respond to this, can you keep it in baby language. I have very, very poor knowledge of the world of technology, and jargon will only confuse me! Step by step would really I have a PC I need to reinstall windows xp on, so i downloaded a torrent copy of xp from the net ( i know it's illegal, but i had a licensed copy, and my horrible ex decided to take it when he left, so i don't feel so bad ) onto my mac. I expanded the .rar file, and was left with three icons. one says image.img and has a little pic of the harddrive on it, and has about 650 MB of info. the other two are small (4kb and 24 MB), and just show a blank page icon, and say image.ccd and image.subNow, I assume I need to get those files onto a c.d, which when inserted intomy P.C will automatically begin the install process on my P.C.
View 12 Replies
View Related
Sep 2, 2009
Would I be able to just burn a few folders containing Windows .exe applications using Finder and run them on a PC?
View 1 Replies
View Related
Jan 15, 2010
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
View 2 Replies
View Related
Jul 14, 2009
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
View 9 Replies
View Related
Nov 24, 2009
I just purchased Toast 10 Titanium Pro with the hopes of being able to burn blu-ray DVDs using my MBP which I purchased last December (2008) with a CD/DVD burner: MATSHITA DVD-R UJ-868.
Do I need to purchase a special blu-ray drive (internal or external) to do this? I was told by my Apple rep that my dvd burner was fine and that I needed to use Final Cut Pro. I read that Toast 10 Titanium Pro was also compatible to make blu-ray DVDs.
View 22 Replies
View Related
Jul 10, 2009
is there a way to install windows 7 rc on VMWare Fusion without burning the iso to DVD? perhaps using a USB drive?
View 3 Replies
View Related
Mar 7, 2010
firstly sorry if this has been asked before, I would search but I don't know the right words to search. basically I have just bootcamped windows 7 onto my 13" macbook and wondered if theres a way to have my macbook automatically ask me which OS to boot into each time I turn it on
View 2 Replies
View Related
Sep 19, 2010
Just to save me some cash, I thought that I might be able to use my windows 7 boot CD to install it on my Mac with boot camp. Is this possible though?
View 1 Replies
View Related
Oct 28, 2009
I have just tried to install windows 7 released version 32 bit in a Boot Camp partition that was running XP just fine. I cannot complete the install process as I get a momentary BSOD and then the sytem goes into a never ending restart cycle. Will not boot in safe mode. Repair utility does not run. I have tried a fresh install 3 times. Anybody with ideas? This is on MacPro Dual processor about 3 years old. Plenty of RAM and HD space. MSFT support in India tries for 2 hours to help and then punts.
View 2 Replies
View Related
Feb 25, 2010
I am having trouble booting up my windows 7 bootcamp, whenever i try to bootup it would give me some screen right after the windows logo and it'll say to repair or somthing, is this a common problem?
View 3 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Oct 7, 2009
I had deleted my old partition of windows because i needed to add more space so i had delete it.. and start over again and everytime i do it this is what it says
View 16 Replies
View Related
Oct 30, 2009
I've tried installing XP on my MBP using Bootcamp, but I guess the XP CD that I have is actually an upgrade CD and not the full system CD that I need for Bootcamp.
Now, I am definitely going to ask around to see if anyone I know has a XP CD, which shouldn't be a problem, but just on the off chance I can't find one(will ebay have em?) could I torrent XP and just burn it to a disc and then insert that when Bootcamp tells me to?
View 6 Replies
View Related
Apr 29, 2010
I'm ready to upgrade my MacBook 13" late 2006 model to a new 15 inch pro, and realize that, especially in the college environment where many professors demand windows, I should run it somehow. I've been doing extensive research for the last hour on the best way to run it, however I'm in a complete deadlock. Some people say just do boot camp, but I don't mind paying up to $100 extra if it will really be much smoother. Even when I try to compare the differences between VMware and Parallels (the latest versions of both), I don't see anything hugely significant. Plus, I see just as many complaints about both of them (I'm reading 1-star HORROR STORIES on amazon of each one), and really, really just want a smooth experience. So, my dear MacRumors friends, I come to you for advice. Which of the three programs do you recommend?
View 6 Replies
View Related
May 13, 2010
I finally made the switch from PC to Mac buy selling my HP laptop and desktop computers and buying the new MacBook Pro. However, I have licenses for Creative Suite 4 for Windows and still need to run it on my Mac using Boot Camp and/or Parallels until I can afford to jump to CS5 for Mac (this MBP took a big chunk of my cash). I'd like to run Windows using Boot Camp AND Parallels - Boot Camp when I need all system resources and Parallels when I need to hop over to Windows to type a Word document or something quick (got Office 2007 for Windows too).
Can I use both Boot Camp and Parallels with one serial number for Windows 7? If so, how do I install? Would I install Windows on Boot Camp or Parallels first? If anyone has some guidance for installing one copy of Windows 7 on both applications
View 13 Replies
View Related
Jan 10, 2009
Would it be possible to install Windows (7) for BootCamp from a USB Flash Drive instead of burning it to a DVDROM?Installing Windows (Vista) from a Flash Drive [URL]is possible and potentially faster than installing from DVD or ethernet. I'm assuming this should work for Windows 7 as well.So the question that remains is if BootCamp can boot? install from? USB. (I've never tried BootCamp, so I'm not familiar with the process of even starting an install.)
View 24 Replies
View Related
Apr 27, 2009
I have on my hard drive a Leopard partition and a Windows 7 partition. I am looking to delete the Windows partition and then have the full hard drive as one Leopard partition, hopefully without any reformatting. Firstly when I installed the Windows partition I did so through bootcamp. I also have parallels 4.0 and so I was able to set up a virtual machine (VM) of this bootcamp partition. I want to now completely get rid of windows on my machine though I am not sure of the best way to do so. I guess working backwards is best: delete the parallels VM then delete the bootcamp partition? Is this the best way to do it? Will the deleted space on my hard drive be converted to space on my Leopard partition?
(I wish to get rid of windows because I am having problems with my mac sleeping. I just want to see if windows is the culprit. Hopefully it is as I have tried everything else including an SMC reset, short of reformatting and installing.) I have backups of everything btw.
View 2 Replies
View Related
Jan 26, 2010
I just recently purchased a 13" MBP Unibody and I'm thinking about installing Windows 7 (64-Bit) on it. If I install Windows with Boot Camp, and then install Parallels, do I need to make another Windows partition, or will it use the partition created in Boot Camp? Should I install Windows using Boot Camp first and then Parallels, or the other way around?
View 7 Replies
View Related
Dec 11, 2010
I tried to install Windows Vista (64bit) using Boot Camp. I get to the window where you select the disk partition you want to install Windows on, and there aren't any options. How can I get the newly created partition (the one I made with Boot Camp Setup Assistant before restarting) to show up on that list? Or, where do I find the "driver" that it requests instead?
View 12 Replies
View Related
Jan 6, 2011
The title says it all. I have searched, and can't seem to find a situation exactly the same as mine. I have Paragon NTFS installed, so OS X CAN write to NTFS drives (namely my Boot Camp partition). I do not have any antivirus on Mac, as it is simply a waste of system resources. I DO have MSE installed on my Boot Camp partition (which is running Windows 7 64 bit by the way). Could I inadvertently pick up a virus in OS X and have it somehow infect my Boot Camp partition?
View 6 Replies
View Related
Jun 16, 2012
Ive got the new iMac 2011 range, 21.5" and im purely installing windows 7 onto it for games. Im planning on playing guildwars2 when it comes out. Ive installed windows 7 perfectly fine already, it all works. However, i realised that you needed to install the drivers onto it in order for wifi, graphics etc to work. So i do so and it says right at the end of the burning process when it has to "verify" the CD and it says it fails. I tried to install the drivers anyway, most of the stuff work except a handful of really important things such as the ATI graphics, video card etc.
Info:
iMac
View 8 Replies
View Related
Dec 14, 2006
I've read numerous posts here saying that its possible to use AVI files in iDVD to make a DVD, but I can't figure out how to do it. I have a series of AVI files that I want to burn to a DVD that will work on any DVD player but iDVD won't even let me preview them (I just get a blank black screen)...
I have VisualHub, but I'm not sure what to do...
View 14 Replies
View Related
Jan 23, 2004
I currently have the 3 Panther install .dmg files on my PC hard drive.
I want to burn them on to disk using Nero on my PC so I can boot up my PowerG4 and erase/partition my hard drive and replace my current useless OS X.1.5
I have tried changing the name to ISO and burning which works BUT when i insert the disk into my mac, the install file has changed from and application to a package which will not open or but from restart!
View 7 Replies
View Related
Mar 3, 2009
This may be an incredibly naive set of questions but...
do most people use iTunes for ripping CD's? - I do. - If not, then what and why?
why do people not burn CDs with iTunes (using Toast or Burn instead)? - I use Burn as advised.
Is it better to create .bin/.cue files when ripping and then burning. -why?
Is there a comprehensive Help for Burn anywhere? I need a step by step for most things!! (in the first instance at least)
View 2 Replies
View Related
Jun 5, 2009
I was trying to burn a DVD with the Built In MAC DVD Burning App but it had a hard time burning the DVD, but once i tried Toast Titanium 10 it seemed to work much better!
Is this the general consensus, that Toast is much better burning software than the built in Mac Burner ?
View 2 Replies
View Related
Oct 12, 2009
Need a free DVD burning app that will convert .avi files so they will play on my DVD player.
View 7 Replies
View Related
Nov 21, 2009
My entire iTunes library is made of AAC files. The problem is that now I need to burn an MP3 CD and iTunes gives me the advice that can't burn the MP3 CD because there is no file in MP3 format. Pretty annoying.
When burning an standard CD, it automatically converts to burn, but not with MP3 CDs!
So, is there any software that does this? I don't want to convert everything and consume my disc space to then put the files on trash manually.
View 2 Replies
View Related
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Sep 29, 2005
I just tried to burn a CD in 5.0.1, and there 'Burning' menu under Edit/Preferences isn't there anymore. How do I change the settings so I burn an Mp3 cd instead of an audio cd?
View 6 Replies
View Related
