The information of disk burning is as follows,
HL-DT-ST DVDRW GWA4080MA:
Firmware Revision: AE39
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I'm trying to burn some data using DVD+R DL using my 17in MBP w/New Toast Titanium.. Unfortunately, its giving me an error and can not burn it. Anyone experienced this issue? Any solution to this problem??
I have the following hardware: MATSHITA DVD-R UJ-846
im having a having a macbook from february 2008 (the white one 2,4 ghz blablabla.. doesn't really matter
because of malfunction of my dvd drive.. i had it replaced (waranty) 9 months ago.
now i thing it's broken again when i try to burn a dual layer verbatim disc..i get this error:
tried it with toast and disk utility.. same result.
dvd's and cd's play fine. just burned an 80 min cd as well :S
dvd drive:
MATSHITA DVD-R UJ-857E:
Firmware Revision:ZF1E
Interconnect:ATAPI
Burn Support:Yes (Apple Shipping Drive)
Cache:2048 KB
Reads DVD:Yes
CD-Write:-R, -RW
DVD-Write:-R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:CD-TAO, CD-SAO, DVD-DAO
Media:
Type:DVD+R DL
ID:MKM 003
Blank:Yes
Erasable:No
Overwritable:Yes
Appendable:Yes
Write Speeds:2.4x, 4x
maybe the lense is dirty but i rarely use the dvd drive.. will clean it tomorrow..but i don't think it will resolve my problem
anyone has a clue?
Thats basically the problem in a nut shell. I can't seem to burn a DVD+R DL, everytime I attempt to do this the system crashes completely and I get the transparent window telling me to restart the system. To me, this feels a lot like the blue screen of death.
Anyone else having a similar problem? Have there been similar problems reported? Its definitely not the discs either, I've tried using Philips and Memorex DVD+R DLs and neither work, however, burning this stuff on Tiger was fine, however I'm not sure if Leopard is to blame because i dont remember if I had burned any DVD+R DLs successfully using Leopard.
I've got a first gen. Mac Pro with a PIONEER DVD-RW DVR-111D.
I have a 1st generation Macbook, and I wanted to know if I can burn dual layer DVDs? Here's the output from System Profiler
Quote:
MATSHITA DVD-R UJ-857:
Firmware Revision: HBEA
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
It says nothing about dual layer support.
I am trying to burn a Dual Layer DVD with my new MacBook Pro 15"
i have been using Toast Titanium 10.
( Brand : Memorex DVD +R DL 8x )
It keeps telling me Error after 5 minutes of burning!
What is wrong ?
Here is 2 screen grabs of the Error....... :
Do any of the MBP's contain a drive that supports burning a label on a DVD with the laser?
View 1 Replies View RelatedI believe all new OSX discs are dual layer discs, My powerbook G4 only has a dvd reader can this read dual layer discs?
My stats for my drive are:
MATSHITA DVD-R UJ-825:
Firmware Revision:DAM5
Interconnect:ATAPI
Burn Support:Yes (Apple Shipped/Supported)
Cache:2048 KB
Reads DVD:Yes
CD-Write:-R, -RW
DVD-Write:-R, -RW, +R, +RW
Burn Underrun Protection CD:Yes
Burn Underrun Protection DVD:Yes
Write Strategies:CD-TAO, CD-SAO, DVD-DAO
Media:No
Just as the question says..Is It possible?
View 3 Replies View Relatedhow to make my idvd burn dual layerd movies? I've done everything the same as I always have and it still won't do it. Do I need to buy something other than Sony discs? I'm at my whits end.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have been trying to burn a .cdr file to a dual layer dvd using Disk Utility. I got it to work once, but I tried four times. I think that it must be very sensitive or something, because I can't figure out any other factor that affects it.
Has anybody else run into this problem, and if so, what's your solution? I think it may have to do with vibrations of the disk drive or something, but I would be lying if I said I knew that for sure...
Does anyone know of any compadible Dual Layer DVD that work with a PPC G5 Dual 1.87ghz?I tried memorex DVD+R DL and it kept on spiting out the disk
View 1 Replies View RelatedI am trying in vain to burn a dual layer DVD with my new MacBook Pro 15".
It should work..... I tried both the Finder Burner and Toast Titanium 8......
Here are the errors it is giving me :
Is it possible to burn a DVD onto a double layer blank DVD+R using thefollowing:
I have a Powerbook 10.3.9 aluminium, with a Matshita DVD-R UJ-816.
Will this burn a double layer or do I need some additional software. Ipresently use Toast 6.0 for normal.
Alright, I couldn't find exactly what I was looking for by searching so I figured I'd ask. I think it should be fairly simple.
I have a pair of DVD's that were made a few years back. They contain a couple hours of footage from an event. Too much to put on one single layer DVD so it got split over 2.
What I'd like to do is copy both intact DVDs. But I much prefer now at this time to do this on one dual layer DVD for simplicity. All I have is the two DVD's which have simple menus and the footage. Ideally, I would like to be able to keep everything, and maybe put one simple menu on top to select between part 1 and part 2.
So what are my options? I do have FCS1 and the latest iLife setup. Not much more. I just don't know the best way to set up and burn this project.
I have been searching the net for 2 straight hours now. I cant get my g5 to read dual layer dvd +r disks. Not write but read. My ibook g4 can just fine. My drive is a pioneer dvr-107d. I keep reading about updating the firmware but for the life of me i cant firmware anywhere.
Information:
powermac g5 dual 1.8
Mac OS X (10.4.10)
I have a 2003 model 1.8 GHz G5. The original SuperDrive still works fine but I have been looking into an internal Dual Layer DVD-R as they continue to come down in price. Are there specific specifications or brands/models I need to look for to ensure OSX compatibility or to support burning from iTunes and the Finder?
Information:
Power Macintosh G5, iBook G4
Mac OS X (10.4.10)
I have a G5 20" iMac.
I would like to replace the DVD for one that will do Dual Layer burn.
Of course I can pay for an expensive replacement.
I was wondering if any of these cheaper options available would work:
LG GSA-T20N
LiteOn DS-8A1P-21C
Anyone know if they are 100% compatible with the iMac G5 20"?
I've got a handful of dual layer DVDs of which I'd like 1 copy of each.
To save time I wondered if I could plug my machine to my mate's machine via a network cable, with the original DVD in one mac, a blank in the other, and just hit 'Copy' in Toast?
AFAIK the write machine can only do 8 speed - would the data throughput via the network cable be fast enough for this?
If not, any way of doing it via Firewire?
I am trying to copy a DVDR recorded on a friend's DVD recorder. The disc is a single layer 4.7Gb TDK DVD+R and I'm using Toast Titanium. The problem is that my computer thinks the DVD+R is a dual layer disc. I say the computer rather than Toast because if I open the disc and copy the VIDEO_TS folder to the hard drive it takes up more than 10Gb, which is impressive since the disc it is copied from only has a 4Gb capacity! I have googled this but failed to find a solution.
View 3 Replies View Relatedcopying DVD's. When I had a PC, I used to use DVD shrink to convert large Dual layer DVDs down to sizes that would fit on a single layer DVD. I downloaded mac the ripper and it works, but it does not downsize DVD's.
View 4 Replies View Relatedmy mum has a mac mini core solo 1.5ghz. those cannot read the dual layer dvd discs so therefore i cannot upgrade the leopard to snow leopard directly. is there any other way i can do it? i checked to see if remote install was on the mac mini but it dosent come with it so anyone have any tips?
View 4 Replies View RelatedThis is a pretty basic question. iDVD
I have dual layer DVDs and want to burn the same small movie on both layers, one would be full screen, the other wide screen so the viewer can choose.
Is this possible? Is it just a matter of burning one movie at a time; will the comp recognize which layer is empty after the first burn?
I need to rename "Original Layer" to Original Image" When this layer exists. In photoshop I've been trying this, but I get this error error "Can’t make «class cCLr» 1 of document "DE00ER515.psd" of application "Adobe Photoshop CS6" into type boolean." number -1700 from «class cCLr» 1 of document "DE00ER515.psd" to boolean tell application "Adobe Photoshop CS6"tell current document if (quick mask mode) then delete channel ¬ "Quick Mask"if layer "Original Layer" then ¬ set OriLayer to "Original Layer" set OriLayer to make layer with properties {name:"Original Image"} delete layer "Original Image" end tellend tell?
Info:
iMac, Mac OS X (10.6.8)
I have some images I want to burn to dual layer DVD's on my i7 iMac.
Which type do I user, DVD+R or DVD-R.
Can my 27" i7 iMac burn dual layer dvd's?
My Optical Drive is an OPTIARC DVD RW AD-5680H
Anyways I have to burn a large disk image (Snow Leopard) legally of course. It's like 6.5gb so I bought memorex duel layer DVD+R 6.5gb the only one available at staples....
^That's my system profile of disk burning
Everytime I try to burn the disk image of 10.6 leapord it rejects the disk and ejects it.
Pretty sure it did just trying to clarify. 1.6ghz MBA rev. A supports 64 bit right?
View 4 Replies View RelatedAs I wait for my Apple Extreme Base Station, I was wondering if it would make sense to create two different SSID networks. One Mixed b/g for 2.4GHz devices and another one solely for 5GHz. I know my ATV2 supports 802.11n in 5GHz. As I go down my list of devices in my house, I can't tell if my MacBook Pros support the 5GHz. Both MacBook Pros are Mid 2010 models.
The reason for creating two different networks is that the AEBS downgrades your network based on the lowest device (i.e. b/g would be forced on a n device if such device connects to your network).
I recently purchased mba 2011 (256gb with i5 ulti), and incoming release of Adobe CS6, I would like to ask if my machine is capable of running CS6? In company I will be given a mac mini 2011 and at home I have a macbook air 2011.
The Photoshop CS6 mentions they need: Mac OSMulticore Intel processor with 64-bit support-Mac OS X v10.6.8 or v10.71GB of RAM2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)1024x768 (1280x800 recommended) resolution display with 16-bit color and 512MB of VRAMOpenGL 2.0–capable system?
Info:
MacBook Air, Mac OS X (10.7.3)
