MacBook Pro :: Lid Opening When Laptop Is Vertical - Due To Weak Magnets?
Dec 24, 2009
My laptop is only about 3 weeks old, and I notice that the gap on the right side is bigger than the left side when I close my computer's (15" 2.8GHz MBP) lid. I am guessing the magnet on the right is not as strong on the left side. Pics below..
I know a few guys have had problems with the lid opening when the laptop is vertical (due to weak magnets).. I dont want it to get to that stage. Right now it barely just holds on.
2nd problem is with my power brick. There is a definate gap between the socket and the brick itself. is this normal? Again pics below..
I bought myself a 13" Macbook pro last july and have loved it. However, the hinge on it has always felt quite flimsy. Recently, I noticed that when I move the screen it sometimes makes faint creak sounds, and I have found that I can push the hinge from side to side (Sorry if this is hard to understand).Is this something to worry about? My Mac is still under warranty and it still works fine, I'm just worried this problem escalates and the hinge ends up snapping.
on my old white 13" MB when I pick up the computer to take it to another room with the screen open it would never move back and forth. When I would tilt it at a 45% angle it wouldn't move. Now I just purchased a new 15" MBP (sweet btw). My only issue seems to be that when I tilt the computer 45% or more the screen almost closes.Is it a weak hinge? Can that be tightened at an apple store (I am lucky and have 4 that are within about 35 to 40 minutes here in NJ)?
Whenever I put my display at a wider angle, it will fall and gradually close. I've found that it will only stay if the screen is perpendicular to the ground. Does anyone see what I'm talking about, or is this just my machine? It's kind of annoying for me.
So, recently I just moved into another house and, unfortunately, where I'm at, I'm not able to get internet service through my old provider (Verizon) and they were kind of my only option at this point. However, during this time, my laptop has been able to connect to a free, available, public wireless network near where I'm at. When I'm in a certain area of my house, it works great, but when I'm on the other side, in my office, I get next to nothing. Given that I need to do a lot of work out of my office, is there any sort of thing I can buy that will extend the signal to that part of house?
I'm using a set of Creative T12 Wireless Bluetooth Speakers which have, until recently, been fantastic. About a month ago i have noticed a marked drop in the volume i can get out of them when connected wirelessly. They work perfectly when wired up and also when connected wirelessly to my father's computer however when I connect, while i do get a signal, the maximum volume i can get out is less than that of the maximum on my macbook pro's internal speakers...
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4)
today my 3-year old MacBook's (core duo white) wireless suddenly dropped to a very weak level. I can't seem to get any signal unless I'm sitting right next to my router, like I am now. I know it's not my router because another laptop, my iPod Touch and my DS all can connect to the router as usual. I've been using said MacBook in the same room consistently for the three years since I've owned it, and never had any problems connecting before.
We have high speed cable w/ which plugs straight into a router, the time capsule is plugged into the router, and our printer is connected to the time capsule, unfortunately, the actual Motorola (an old) router that the time capsule is plugged into, is much faster, even 2-3x (perhaps more) faster than the time machine on Wi-Fi, my iPod Touch barely loads anything on it (even right next to it), and my dads iPhone only works on the time capsule network.
(This is 2008 Model time capsule, not the newer 2009 one)
The MB Pro is normally within 3-7 meters of the time capsule, I'm not sure why it's so slow, especially when the laptop (MB Pro) is down in the bedroom (maybe 20-25 meters away, in a very open house), it loads incredibly slow! I'm wondering if this is normal behavior? or are there settings to configure or what? I was also thinking of getting the newer model, and get an apple TV, but I'm worried that it might be incredibly slow, based on this previous model we have.
i'm trying to setup a mini wifi hotspot in my shoe box of a bedroom. I have a mac pro, iBook and iPhone and i can't seem to get either the iBook or iPhone to connect to an "Airport Internet sharing" connection.
I thought it might be the thick aluminium box hampering the signal but i'm literally about 6ft from the MP tower and really shouldn't have problems from that range should i?
also, their all .avi video's. and i'm really confused! also, quicktime isn't letting me play .avi videos for some reason! and vlc won't download for me. and i'll put them on a USB but they wont download on my computer!
I'm trying to access my wireless router from fairly far away and the signal is very weak. I wanted to make a cantenna to hook up to my MacBook but wasn't sure about how to go about that. Is there any way to boost the range by hooking up an external antenna to the Mac? Or is there any other cheap way to boost the signal from the computer end.
I made a deal with a neighbor where we share the cost of internet. We use a wifi network and I use my MBP in my office and get 2, sometimes 3 bars of wifi. I wanted to extend wifi to the rest of the house and also be able to plug in my printer so I bought an airport express.First problem I'm running into is that where my 2009 MBP 13" laptop gets 2-3 bars, the router doesn't even SEE the wifi signal from the original D-Link Router.
I have an aluminum macbook and I just bought a monitor for it. I want to have the macbook closed on a vertical stand but I am concerned about heat problems. Does anyone use their macbook on the vertical stand most of the time and if so do you encounter any heat problems? and are there any stands out there that cool it as well so you don't have to worry about over heating?
I've been having this problem for the last few weeks intermittently, and occurs whenever I bring my Macbook Pro (17 � 5,2 � 10.6.4) awake from sleep, or sometimes just when I switch it on.
It is a bit difficult to describe, so here is a picture:
[URL]
I have to hard-reset the laptop to fix this each time...
Do I need to send it away for repairs or is this something that I could fix myself?
I did a quick forum search and didn't come up with anything. I'm looking for a vertical stand for my Macbook to use while at home. I need to free up some desk space and that looks like the perfect solution. Alternatively I'm thinking of building a shelf under the desk to slide it in while I'm using the external monitor.
For the past few days, my screen has been going in and out of being entirely covered by 1px white lines that occasionally flicker blue or something. Like, when I'm typing (as I am now) if the window is positioned one pixel off, the blinking cursor won't appear (and on my black screensaver, it looks more like it's white/light grey because literally every other 1px line is white). Well, this morning it got weird again, but it hasn't gone back to normal!
I have a Mid-2007 Santa Rosa Macbook Pro, 2.4 Ghz Core 2 Duo- LED Screen, backlight works fine and if I turn it completely down ('off') the problem persists. I have Boot Camp installed, and the problem persists when booting into Windows as well.
I looked around and tried a few fixes to no avail (slept the screen, reset the PRAM, messed with the resolution a bit).
I took a screenshot and everything shows up normal. I had to finish a paper I was working on, and the screen was getting unbearable, so I tried plugging it into a mate's external lcd and the image came up completely fine, no vertical lines!
So, what could this be, and what could I do to fix it? Could this be the infamous problem with the Nvidia 8600GT M graphics card- so would I have to get the logic board repaired!? (UGH I hope not) Could it just be a connection issue? I did install a new hard drive, a new stick of memory, and Leopard, but that was months ago! Anything else I might be missing? and I hope this problem isn't too serious!
P.S.-on a side-note, has anybody done the upgrade to the latest firmware for the fans (SMC something)? Should I give that a try (or should I do it anyway, regardless of whether it could help)? When it was released, I heard of some bad experiences, so I stayed away.
So, my late 2008 aluminum Macbook has been giving me some issues. At first, the display basically conked out on me so I had to get that replaced. Then about a week after it got replaced, it looked like some sort of liquid had oozed out of the display. It was basically between the LCD screen and the glass display. I pressed on it a couple times with my thumb and it went away. Then yesterday, the liquid came back. Then late last night, this vertical line of static came up and it wont go away.
Here is a picture of the liquid stuff. It's not great because I can only see it when the screen is off because the vertical stripe is on top of the liquid stuff. Its kinda hard to see, but it looks like oil on the inside of the screen.
I have had my Laptop for over 3 years now and with really no significant problems. A couple of days ago though, my laptop display got 3 vertical black/white/black bars on the right third of the screen and I am just curious if it is dying. I am connected to an external display and it's been awhile like this, but it makes it impossible to use as a laptop anymore.
I have a vertical line that appears on my screen and it's happened before. I took a screenshot but it doesn't appear? The last time this happened, it was fixed for free but I'm wondering if this is a common issue or is something wrong with my model? Version 10.6.4
Hi I'm connecting an external monitor to my macbook pro and am experiencing regular vertical lines throughout the external screen. I've tried DVI-D and VGA. I've tried changing resolutions. I have taken a screen shot of the monitor but this screen shot shows a clear image. Attached is a picture of what it looks like. Hard to spot as taken with my isight. (Ignore the cable hanging down).
I connected my Samsung syncmaster 215TW with macbook - via minidisplay port reduction to DVI. when I turn the monitor verticaly, nothing happens... do I have to install some aditional software to my macbook?
Specs: 2007 MBP, using a clear hard Speck case 15 inch 4mb RAM 160gb HD, 650gb external HD
I've had it sent into Apple once for the horizontal flashing lines, but these are new... it's like a gray vertically striped film covers the whole screen, and unlike the horizontal lines, shaking/hitting the screen does not help.
far I've found 2 options:- The insanely priced Balmuda (seriously, who buys this stuff?)- The much more reasonable PowerSupport stand..not sure if PS ship to UK though, have emailed to ask.Any other alternatives out there? Right now it's sitting on a box under the desk, not cool.
My MacBookPro 15" 5.3 worked fine until today, All the blacks (rgb 0,0,0) on the screen become red stripes.
When I boot into Linux or Windows the same problem appears, so it's probably a hardware problem.
I have no expensive adaptor to connect to an external lcd screen, so I don't know yet if the problem is in the mac screen or in the cabling or somewhere else...
Here are 2 screenshots of black squares a drawed in Illustrator, one taken on the mac (cmd + shift + 3)
one taken with a camera (where you can see the red lines)
I want to avoid the MacStore as I want to avoid missing my laptop for a month...
anyone has experienced a wide (2cm) white vertical line on a macbook pro. Screenshots are OK so it's not the GFX but hopefully someone may know if it is likely to be a cable or the actual LCD?
