Whenever I put my display at a wider angle, it will fall and gradually close. I've found that it will only stay if the screen is perpendicular to the ground. Does anyone see what I'm talking about, or is this just my machine? It's kind of annoying for me.
View 7 Replies
I bought myself a 13" Macbook pro last july and have loved it. However, the hinge on it has always felt quite flimsy. Recently, I noticed that when I move the screen it sometimes makes faint creak sounds, and I have found that I can push the hinge from side to side (Sorry if this is hard to understand).Is this something to worry about? My Mac is still under warranty and it still works fine, I'm just worried this problem escalates and the hinge ends up snapping.
View 3 Replies View Relatedon my old white 13" MB when I pick up the computer to take it to another room with the screen open it would never move back and forth. When I would tilt it at a 45% angle it wouldn't move. Now I just purchased a new 15" MBP (sweet btw). My only issue seems to be that when I tilt the computer 45% or more the screen almost closes.Is it a weak hinge? Can that be tightened at an apple store (I am lucky and have 4 that are within about 35 to 40 minutes here in NJ)?
View 7 Replies View Relatedwhen ever I open or close my mac book pro the hinge seems to creak. it's intermittent and only creaks once, not constantly when opening or closing it.Anyone else experienced this? I've got apple care, I've had it 2months, I don't really want to use my apple care if it's a common problem. It's not effecting the machine or annoying me, it's just it's allot of money on something if it's not a common thing.
View 12 Replies View RelatedI am trying to anodize my alluminum Macbook unibody that I just got and I have begun disassembling it. In order to anodize or electroplate the aluminum, it must be stripped down to pure metal. No cable, wires, boards, nothing. THe bottom half of the computer with the motherboard and keyboard I have succesfully gutted. The top half, however, I am having no such luck with. I need to remove the hinge/lcd/display assembly from the aluminum back cover. I have searched everywhere online and can find nothing. Ifixit does not go that far. The youtube video by this other company shows the Macbook Pro display and hinge magically come off, but they do not share how [URL].
View 6 Replies View RelatedI tried to pass a text (containing a URL) to "Display Web Pages" action. It gets the text but adds %0D at the end of the text, so of course the "Not Found" error comes up in Safari. For example: [URL] Then after passing it to the "Display Web Pages" action, it becomes [URL] Is there a workaround for this?
Information:
Macbook
Mac OS X (10.5.6)
I bought a uMBP17 and the Speck hard shell for it. I was surprised at how much heavier the machine becomes with the armor on. So I've noticed that the hinge does seem to stress a bit with the extra weight of the shell.
Have you guys noticed that ? Is this something that I should be concerned about ?
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
If the battery is 100% and I keep it charging will the battery become weak
View 4 Replies View RelatedSo, recently I just moved into another house and, unfortunately, where I'm at, I'm not able to get internet service through my old provider (Verizon) and they were kind of my only option at this point. However, during this time, my laptop has been able to connect to a free, available, public wireless network near where I'm at. When I'm in a certain area of my house, it works great, but when I'm on the other side, in my office, I get next to nothing. Given that I need to do a lot of work out of my office, is there any sort of thing I can buy that will extend the signal to that part of house?
View 1 Replies View RelatedI'm using a set of Creative T12 Wireless Bluetooth Speakers which have, until recently, been fantastic. About a month ago i have noticed a marked drop in the volume i can get out of them when connected wirelessly. They work perfectly when wired up and also when connected wirelessly to my father's computer however when I connect, while i do get a signal, the maximum volume i can get out is less than that of the maximum on my macbook pro's internal speakers...
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4)
My laptop is only about 3 weeks old, and I notice that the gap on the right side is bigger than the left side when I close my computer's (15" 2.8GHz MBP) lid. I am guessing the magnet on the right is not as strong on the left side. Pics below..
I know a few guys have had problems with the lid opening when the laptop is vertical (due to weak magnets).. I dont want it to get to that stage. Right now it barely just holds on.
2nd problem is with my power brick. There is a definate gap between the socket and the brick itself. is this normal? Again pics below..
today my 3-year old MacBook's (core duo white) wireless suddenly dropped to a very weak level. I can't seem to get any signal unless I'm sitting right next to my router, like I am now. I know it's not my router because another laptop, my iPod Touch and my DS all can connect to the router as usual. I've been using said MacBook in the same room consistently for the three years since I've owned it, and never had any problems connecting before.
View 3 Replies View RelatedI tried to find a menu which gives me a list of action when I close the monitor lid. But I did not see anything in System preferences.
View 10 Replies View RelatedTrying to download monthly statements off sunpass account online....They download as .action files...Automator has popped up...have no idea how to use it...
do not have microsoft office but am using apple pages...
Info:
MacBook Pro, Mac OS X (10.6.8)
We have high speed cable w/ which plugs straight into a router, the time capsule is plugged into the router, and our printer is connected to the time capsule, unfortunately, the actual Motorola (an old) router that the time capsule is plugged into, is much faster, even 2-3x (perhaps more) faster than the time machine on Wi-Fi, my iPod Touch barely loads anything on it (even right next to it), and my dads iPhone only works on the time capsule network.
(This is 2008 Model time capsule, not the newer 2009 one)
The MB Pro is normally within 3-7 meters of the time capsule,
I'm not sure why it's so slow, especially when the laptop (MB Pro) is down in the bedroom (maybe 20-25 meters away, in a very open house), it loads incredibly slow! I'm wondering if this is normal behavior? or are there settings to configure or what? I was also thinking of getting the newer model, and get an apple TV, but I'm worried that it might be incredibly slow, based on this previous model we have.
i'm trying to setup a mini wifi hotspot in my shoe box of a bedroom. I have a mac pro, iBook and iPhone and i can't seem to get either the iBook or iPhone to connect to an "Airport Internet sharing" connection.
I thought it might be the thick aluminium box hampering the signal but i'm literally about 6ft from the MP tower and really shouldn't have problems from that range should i?
I'm trying to access my wireless router from fairly far away and the signal is very weak. I wanted to make a cantenna to hook up to my MacBook but wasn't sure about how to go about that. Is there any way to boost the range by hooking up an external antenna to the Mac? Or is there any other cheap way to boost the signal from the computer end.
View 4 Replies View RelatedI made a deal with a neighbor where we share the cost of internet. We use a wifi network and I use my MBP in my office and get 2, sometimes 3 bars of wifi. I wanted to extend wifi to the rest of the house and also be able to plug in my printer so I bought an airport express.First problem I'm running into is that where my 2009 MBP 13" laptop gets 2-3 bars, the router doesn't even SEE the wifi signal from the original D-Link Router.
View 3 Replies View RelatedAfter playing with my friend's MacBook, and having a long hard think, I'm definitely of the opinion that the hinge on my MacBook is far too loose. It can still support itself, but I get major wobble upon opening, it even wobbles when I type (not ferociously).
I don't get any sort of resiliance when I try to open or close it, I literally have to be careful as so not to slam it, it's like I'm closing thin air.
It just doesn't feel sturdy enough for a notebook which needs everyday carting around and use.
Also when the MB is closed the top lid (with the screen) slides a bit this way and that over the base. Only a few millimeters, but enough to notice.
The problem is, I'm most likely only going to get one opportunity to get to see an genius.
The MB is covered by AppleCare and so forth, but will the genius open the thing up right there and then and give whatever needs tightening a good tighten?
Have any of you experienced this issue before and was it solved, and if so how? (Time, in-store or send off job, etc etc).
I just unboxed this beauty. This is my first mac ever and I love it so far. However one thing I noticed straight out of the box was how loose the hinges are. The screen tilts if I move the macbook air to a 90 degree angle. I've own quite a few laptops but this is the first one with a loose hinge straight out of the box. Is this normal or should I be meeting with a nerd?
View 24 Replies View RelatedOn another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
It appears that the MacBook Air may have a hinge problem.
Mine sure does, exactly as described, see [URL].
Not sure if a lawsuit will fix mine, but if it gets noticed maybe Apple will respond. Anyone else having this problem?
So I just got my MacBook Air (rev A) back from AppleCare after my hinge (like many others', apparently) decided to randomly bust itself. I was very pleased that when I took my MBA to the Apple Store, they didn't bat an eye about replacing the hinge (I'd heard horror stories about Apple denying the part was defective and calling the damage a user error, even with computers covered under warranty). But I was shocked when my package arrived today and the letter inside detailed the parts replaced. Keep in mind, the only thing wrong with my computer (as far as I could tell) was a broken hinge. Here's what they replaced:
Antenna window
Video Display Panel
Camera
Bottom Case
Display Housing
Clutch
Clutch (two different part numbers)
Bezel
Top Case
Logic Board
I want to take it to an Apple Store but doubt they will help me since my AppleCare ran out.
View 5 Replies View RelatedIt seems like the hinge has stiffened up since owning it. Sometimes makes a pop noise when moving it from a non-moving position. I would imagine it's the plastic bezel that's kinda loose and snappy if you touch it at the bottom of the hinge but I dunno. Any one else? I can deal I just hope it doesn't cause damage.
I need this machine to be fully working when I go abroad in the Fall.
does anyone know how to use the function key actions within photoshop? I really would like to think i'm simply missing something rather than apple did something silly like overriding applications choice for f keys.
View 2 Replies View RelatedI noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
View 1 Replies View RelatedI just purchased a new 13 inch macbook air with the 1.86 ghz processor , 2 gb of ram and a 128 gb ssd.
It is currently being delivered to me through UPS but I am worried if this new generation is plagued by the infamous "Hinge issue" that the 2008 model had.
Can anyone comment on the hinge structure of the new model and if it will last at least 3 years without hinge problems ?
