Hardware :: Laptop Stand Holds The Laptop In A Vertical Position For Running In Clamshell Mode?
Jan 7, 2008Does any company make a laptop stand that holds the laptop in a vertical position for running in clamshell mode?
View 6 RepliesDoes any company make a laptop stand that holds the laptop in a vertical position for running in clamshell mode?
View 6 RepliesI tried SMC resets and everything. The Macbook takes a charge and charges normally when it is asleep, or off. It will charge to the max (96%). Battery has 349h load cycles. Charges when asleep or off. As soon as I power on the laptop or wake it up, it will stop charging. Battery holds the normal charge I usually get (3ish hours). Tried a few pram and smc zaps. Battery charger is a Hong Kong knockoff. Battery inside is genuine. 2008 Aluminum Macbook. Cleaned magsafe and port with q-tip and still to no avail.
When plugged in, it will run *off the battery* and the charger will show a green light and not trickle charge the battery. It will drain the battery, and then when it is drained it will run off the power. Check the screen shot. I am thinking that the charger is the culprit. Because it holds a charge when I let it charge while it is off. It will charge up just fine, in the two hours or whatever it takes to charge itself up. Battery usage is normal when it is running off the battery.
I'm going on a day long driving trip with my kids later this week and I kludged together a good solution of bungee cords to hold my titanium PB to the back of a seat so I can play movies for them. I got a Sony car inverter that seems to output an appropriate amount of power for the PB. On a test drive around the block with the DVD running, the PB seemed to get pretty hot, but otherwise worked fine. Is there any reason why I shouldn't go ahead with this setup? Anything I'm likely to wreck?
View 2 Replies View Relatedi was thinking of the griffin elevator laptop stand, what do you guys think ?
im open to ideas, anything cheaper / better than that ?
My laptop is only about 3 weeks old, and I notice that the gap on the right side is bigger than the left side when I close my computer's (15" 2.8GHz MBP) lid. I am guessing the magnet on the right is not as strong on the left side. Pics below..
I know a few guys have had problems with the lid opening when the laptop is vertical (due to weak magnets).. I dont want it to get to that stage. Right now it barely just holds on.
2nd problem is with my power brick. There is a definate gap between the socket and the brick itself. is this normal? Again pics below..
also, their all .avi video's. and i'm really confused! also, quicktime isn't letting me play .avi videos for some reason! and vlc won't download for me. and i'll put them on a USB but they wont download on my computer!
View 4 Replies View Relatedsometimes i want to sleep mode my MBP without clicking in the menu bar, can i close the lid of my MBP to go to sleep mode?
Info:
MacBook Pro, Mac OS X (10.7.2)
I am considering switching to a Mac Book Pro and have been told that it is capable of running windows operating systems. Does anyone have any experience with this and how well it works? The main reason for running Windows are two specific programs not available for Macs plus my company uses Microsoft Outlook for email. The model that I am looking to buy is the 15" 2.53 GHz, 4GB Memory with NVDIA 9400M graphics.
View 3 Replies View RelatedI have had my macbook pro for a little over two years I have noticed a significant decrease in spead and the unit is now starting to get hot when in use, any suggestions on how to improve the performance and address the heating issues.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.2)
I came to use my laptop and the fan was running but it wasn't turned on. The green light on the charger is lighting up and if I take the battery out the fan stops. What do you think happened to my laptop? Is it fatal? Can this be reset or something?
View 1 Replies View RelatedI recently brought my computer to the Apple store to repair dents on the outside of my laptop.Ever since I received it back it does not go into sleep mode when I close the screen.
Info:MacBookPro
I feel like my laptop is starting to run a little slow , how do I speed it up ?
Info:
MacBook Pro (13-inch Late 2011), iOS 5.1.1
How do I get my IMAC to talk to my laptop running Windows XP SP2
Info:
iMac, Mac OS X (10.7.3)
My screen today suddenly went black but the laptop was still running. I shut it down and unplugged for several hours, no luck. I have done the hard SMC and PRAM resets. Both times the apple screen comes up but now it just stays a solid grey.
Info:
Mac Pro
my mid-2012 Macbook Pro Retina laptop is having Retina screen problems at startup, bootup and wakeup modes. The main failure mode is, during reboot or wakeup the laptop's Retina display screen does not work, a blank Retina screen results, and the keyboard does not light up. Also, at random times the laptop will just crash and self reboot, but then during reboot the Retina screen does not work but the computer reboots. Additionally, this laptop, compared to my work's PC laptops is lightly used, mostly for web browsing, photo viewing and email. At first this problem was only intermittent, but now the Retina displace screen failure mode has become a chronic repeating failure mode and is happening almost everyday and stays in this Retina display failure mode for a longer period of time. Additionally, this 2012 Macbook Pro Retina laptop had a failed graphics card within its first 4 months of light use, the failed graphics card had to be replaced.
Info:
MacBook Pro with Retina display, OS X Mountain Lion (10.8.2)
I have a 2011 macbook that has a motherboard that is broken, and that macbook has a terabyte Hard drive that was put in about a year ago after a broken hard drive was removed. Now I have bought a brand new macbook same model and I was advised by the apple store to take the old TB hard drive and swap it with the one in the new computer. I just want to know if by doing this I'm going to loose all of my files and programs by just swapping them. I have no back up anywhere just the files on the hard drive in the broken computer. So am I going to loose all of the files on the hard drive when I swap it? or will I have to get it backed up some how? They are both running Mavericks
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I saw some ad for a vertical stand for MBP, but can't remember where. Anyone know which one I mean?
View 10 Replies View RelatedI have a IMac 10.6.2 and my wireless mouse and wired mouse only goes in 1 vertical position using the ball on top of mouse. It works if I use the right margin to go up and dragging it. It was working great and then this occured. My trackpad is fine??
Info:
iMac, Mac OS X (10.6.2), Wireless mouse
I have an aluminum macbook and I just bought a monitor for it. I want to have the macbook closed on a vertical stand but I am concerned about heat problems. Does anyone use their macbook on the vertical stand most of the time and if so do you encounter any heat problems? and are there any stands out there that cool it as well so you don't have to worry about over heating?
View 7 Replies View RelatedI'm considering buying/making a stand for my MBP but have limited desk space, so what I ideally want is a stand which will hold my laptop, fully opened, with its screen completely vertical against, say, the wall behind my desk. If this is hard to imagine, think of it this way: say you're looking at the laptop from the right hand side, in it's normal open position it makes a kind of '9-o-clock' shape with the screen perfectly vertical and the keys perfectly horizontal. I'm looking for more of a '7-o-clock' but where the screen is raised to eye level, whilst still perfectly vertical
View 2 Replies View RelatedI did a quick forum search and didn't come up with anything. I'm looking for a vertical stand for my Macbook to use while at home. I need to free up some desk space and that looks like the perfect solution. Alternatively I'm thinking of building a shelf under the desk to slide it in while I'm using the external monitor.
View 3 Replies View RelatedI recently replaced the hdd in my 13" MBP with a travelstar 7k500. It's fantastic: quiet, cool, fast, energy efficient. Really happy.
However, I did noticed yesterday when I was moving my laptop with the body at an 80 degree angle to the floor that the drive makes a strange noise that I haven't heard in other drives. It sounds almost strained. it's only at that angle - if it's completely vertical the drive is silent again.
I doubt this is anything to worry about, but I'm curious what is actually happening and whether there is something I can do about it? Anybody else with this drive have the same experience?
far I've found 2 options:- The insanely priced Balmuda (seriously, who buys this stuff?)- The much more reasonable PowerSupport stand..not sure if PS ship to UK though, have emailed to ask.Any other alternatives out there? Right now it's sitting on a box under the desk, not cool.
View 24 Replies View RelatedAs title says; will gravity eventually take its toll on the hdd?
View 2 Replies View RelatedOne day I was using my MBP open and external monitor hooked up. Everything was fine until the internet went down suddenly while I was using iChat.
My airport wouldn't see a network and after a couple restarts and a few resets my airport finally connected to my network. Once connected it would only issue a self-assigned IP, which obviously wouldn't work.
I was able to get around this by manually entering in the correct info but the speeds were low at best, usually pausing and stalling every minute.
After frustratingly trying get it to work, I entered clamshell mode because there was no reason at the time to have dual monitors. Once I did, viola, the airport kicked in and started working full force. It's been this way for about a month now.
My laptop is a MacBookPro5,1 with a 2.8 GHz processor and 4 GBs of RAM.
I've read that airports will have serious degradation issues if overheated and while that may be the issue, it doesn't seem to be the case.
I have smcFanControl installed and the MBP seems to be relatively cool to the touch. The fans never seem to be loudly kicking in and I have it raised on a fan powered cooling pad.
I do, though, use pretty much every port on my MBP. External monitor, speakers, both USBs, and firewire 800 are all in use, so maybe this is a resource issue or a very area specific heat issue.
I use my MBP w/ a external display, usb keyboard and magic mouse. I keep my MBP in clamshell mode all the time while stationed at my house. When I shut my computer down, everything is peachy, but then when I want to power up my computer, I wish there was a power button on my keyboard so I don't have to open my laptop up and press the power button, then shut it fast. Any way to set a f1 or f2 key to turn on my comp in clamshell mode? or maybe make my magic mouse turn on my computer through some setting
View 4 Replies View RelatedI want to know what clamshell mode is and how do I set it?
Info:
MacBook Pro, Mac OS X (10.7.3)
I'm running my MacBook (not "Pro") in clamshell mode to drive two external monitors. Am I risking anything by having the lid closed?[url] Please bear with me for a second. I'm a long time Mac user—since the Mac Plus came out—and diehard Power Mac and Tiger fanatic, so I'm new to Mac-Intels and Snow Leopard. A full description of my MacBook setup is here:[url] This is my only Intel Mac. I rescued it from the trash, literally, after my wife had discarded because of a bulging battery that was making the keyboard, trackpad and mouse inoperative. I only use it to run Photoshop 13 ("CS6") which doesn't run on my Power Mac G5 Quad.
Info:
PowerMac, Mac OS X (10.4.11), 2.5G5Quad,16GB,7800GTX 512MB, Tiger
I had a problem with my laptop where the lcd on the monitor does not always work, presumed to be due to a loose inverter cable or something similar to this. As a temporary solution I have been using an external monitor for the past few days. Depending on whether the laptop lcd is working, I have had it on both mirrored and dual monitor settings. However, this evening when I have come to use it, the external monitor is now the only one that is working. Options to turn off mirror display have now gone. Also, the button on my mouse pad no longer works, yet the pad itself does.
I have come to the conclusion that my laptop is in 'clamshell' mode. It remains on, and does not sleep when I close the lid. I have put it to sleep form the apple menu, disconnected the external monitor, and the opened the lid again, and when it turns back on from sleep, the screen flashes on for a second, but then goes to sleep again. I have tried turning it off, restarting, taking the battery out, everything I can think of, but unless the external monitor is connected it almost immediately goes back to sleep.
I have connected my mbp to the samsung 23" external monitor(and I am loving it ), and I figured that during the weekdays I am almost using it clamshell mode all the time.
View 2 Replies View Related